Surface kinetics and energetics from single crystal adsorption calorimetry lineshape analysis: Methyl from methyl iodide on Pt(111)

The first use of single crystal adsorption calorimetry (SCAC) to probe the kinetics of surface chemical reactions is presented. It is applied to study a common situation encountered in catalytic mechanisms, wherein a gas quickly populates a molecularly adsorbed state that then converts to more stable products on a slower timescale (10-1000 ms). We show. that for such a two-step process, detailed analysis of the heat-detector signal's time-response lineshape to a single pulse of gas provides the rate constant for the second step and the heats of reaction for both of the elementary reactions. We apply this analysis to the dissociative adsorption of methyl iodide (CH3I) on Pt(111) at 270 K, to measure the heats of reaction for the elementary steps involved and the rate constant for the slow step, all as a detailed function of coverage. At low coverage, the reaction is CH3I5 CH3Iad CH3,(ad) + I-ad, followed at high coverage by CH3,(ad) CHad + 2H(ad) and CH3,(ad) + H-ad -> CH4,(g) (above 0.08 ML total CH3.(ad) Plus I-ad). These results provide the rate constant for the dissociation of CH3Iad and the heats of formation of both CH3,(ad) and CHad. These two heats agree with values determined at 320 K where the rates are so fast that lineshape analysis is not needed, proving the validity of the lineshape analysis method introduced here for analyzing SCAC data. (C) 2013 Elsevier Inc. All rights reserved.