相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Preparation and characterization of several types of polyvinyl butyral hollow fiber membranes by thermally induced phase separation
Toshihiko Kitaura et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Effect of Take-Up Speed on Polyvinylidene Fluoride Hollow Fiber Membrane in a Thermally Induced Phase Separation Process
Xianfeng Li et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Effects of Nucleating Agents on the Morphologies and Performances of Poly(vinylidene fluoride) Microporous Membranes via Thermally Induced Phase Separation
Min Liu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2013)
Effects of designed PLLA and 50:50 PLGA scaffold architectures on bone formation in vivo
Eiji Saito et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2013)
Scaffold/Extracellular Matrix Hybrid Constructs for Bone-Tissue Engineering
Richard A. Thibault et al.
ADVANCED HEALTHCARE MATERIALS (2013)
Fabrication of poly-DL-lactide/polyethylene glycol scaffolds using the gas foaming technique
Chengdong Ji et al.
ACTA BIOMATERIALIA (2012)
Structure and surface nanomechanics of poly(L-lactide) from thermally induced phase separation process
Jundong Shao et al.
APPLIED SURFACE SCIENCE (2012)
Polyoxymethylene-Homopolymer/Hydroxyapatite Nanocomposites for Biomedical Applications
Kinga Pielichowska
JOURNAL OF APPLIED POLYMER SCIENCE (2012)
Tubular perfusion system culture of human mesenchymal stem cells on poly-L-lactic acid scaffolds produced using a supercritical carbon dioxide-assisted process
Paola Pisanti et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART A (2012)
Porous scaffold architecture guides tissue formation
Amaia Cipitria et al.
JOURNAL OF BONE AND MINERAL RESEARCH (2012)
Effect of adding a second diluent on the membrane formation of polymer/diluent system via thermally induced phase separation: Dissipative particle dynamics simulation and its experimental verification
Yuan-Hui Tang et al.
JOURNAL OF MEMBRANE SCIENCE (2012)
Structure and performance of polyacrylonitrile membranes prepared via thermally induced phase separation
Qing-Yun Wu et al.
JOURNAL OF MEMBRANE SCIENCE (2012)
3D PLLA/Nano-hydroxyapatite Scaffolds with Hierarchical Porous Structure Fabricated by Low-temperature Deposition Manufacturing
Liang Yingchun et al.
JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION (2012)
Advances in Polymeric Systems for Tissue Engineering and Biomedical Applications
Rajeswari Ravichandran et al.
MACROMOLECULAR BIOSCIENCE (2012)
Bone tissue engineering: from bench to bedside
Maria A. Woodruff et al.
MATERIALS TODAY (2012)
Early stage structural evolution of PLLA porous scaffolds in thermally induced phase separation process and the corresponding biodegradability and biological property
Jundong Shao et al.
POLYMER DEGRADATION AND STABILITY (2012)
Phase separation induced ordered patterns in thin polymer blend films
Longjian Xue et al.
PROGRESS IN POLYMER SCIENCE (2012)
A review of the mechanical behavior of CaP and CaP/polymer composites for applications in bone replacement and repair
Amy J. Wagoner Johnson et al.
ACTA BIOMATERIALIA (2011)
Long-term in vitro degradation of PDLLA/Bioglass® bone scaffolds in acellular simulated body fluid
J. J. Blaker et al.
ACTA BIOMATERIALIA (2011)
Solid Free-Form Fabrication of Tissue-Engineering Scaffolds with a Poly(lactic-co-glycolic acid) Grafted Hyaluronic Acid Conjugate Encapsulating an Intact Bone Morphogenetic Protein-2/Poly(ethylene glycol) Complex
Jung Kyu Park et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Biomimetic nanofibrous scaffolds for bone tissue engineering
Jeremy M. Holzwarth et al.
BIOMATERIALS (2011)
Engineering porous scaffolds using gas-based techniques
Fariba Dehghani et al.
CURRENT OPINION IN BIOTECHNOLOGY (2011)
Finite Element Method (FEM), Mechanobiology and Biomimetic Scaffolds in Bone Tissue Engineering
A. Boccaccio et al.
INTERNATIONAL JOURNAL OF BIOLOGICAL SCIENCES (2011)
Custom-made composite scaffolds for segmental defect repair in long bones
Johannes C. Reichert et al.
INTERNATIONAL ORTHOPAEDICS (2011)
Crystallization Kinetics of Ultra High-Molecular Weight Polyethylene in Liquid Paraffin During Solid-Liquid Thermally Induced Phase Separation Process
Chun-Fang Zhang et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2011)
Design and Dynamic Culture of 3D-Scaffolds for Cartilage Tissue Engineering
Rouwayda El-Ayoubi et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2011)
Degradation Behavior of 3D Porous Polydioxanone-b-Polycaprolactone Scaffolds Fabricated Using the Melt-Molding Particulate-Leaching Method
Se Heang Oh et al.
JOURNAL OF BIOMATERIALS SCIENCE-POLYMER EDITION (2011)
Dissipative particle dynamics simulation on the membrane formation of polymer-diluent system via thermally induced phase separation
Yan-Dong He et al.
JOURNAL OF MEMBRANE SCIENCE (2011)
Thermally induced phase separation in PαMSAN/PMMA blends in presence of functionalized multiwall carbon nanotubes: Rheology, morphology and electrical conductivity
Ceren Ozdilek et al.
POLYMER (2011)
EFFECT OF SOME FACTORS ON FABRICATION OF POLY(L-LACTIC ACID) MICROPOROUS FOAMS BY THERMALLY INDUCED PHASE SEPARATION USING N,N-DIMETHYLACETAMIDE AS SOLVENT
Shirong Li et al.
PREPARATIVE BIOCHEMISTRY & BIOTECHNOLOGY (2011)
Polymeric Scaffolds in Tissue Engineering Application: A Review
Brahatheeswaran Dhandayuthapani et al.
INTERNATIONAL JOURNAL OF POLYMER SCIENCE (2011)
Microporous collagen spheres produced via thermally induced phase separation for tissue regeneration
Hussila Keshaw et al.
ACTA BIOMATERIALIA (2010)
Microsphere-based scaffolds for cartilage tissue engineering: Using subcritical CO2 as a sintering agent
Milind Singh et al.
ACTA BIOMATERIALIA (2010)
Tailoring the morphology of high molecular weight PLLA scaffolds through bioglass addition
N. Barroca et al.
ACTA BIOMATERIALIA (2010)
Development of bone-like composites via the polymer-induced liquid-precursor (PILP) process. Part 1: Influence of polymer molecular weight
Sang-Soo Jee et al.
ACTA BIOMATERIALIA (2010)
Mechanical and microstructural properties of polycaprolactone scaffolds with one-dimensional, two-dimensional, and three-dimensional orthogonally oriented porous architectures produced by selective laser sintering
Shaun Eshraghi et al.
ACTA BIOMATERIALIA (2010)
Electrospinning: A fascinating fiber fabrication technique
Nandana Bhardwaj et al.
BIOTECHNOLOGY ADVANCES (2010)
Synthesis and thermo-physical properties of chitosan/poly(DL-lactide-co-glycolide) composites prepared by thermally induced phase separation
Santos Adriana Martel-Estrada et al.
CARBOHYDRATE POLYMERS (2010)
Fabrication and Characterization of Electrospun PLGA/MWNTs/Hydroxyapatite Biocomposite Scaffolds for Bone Tissue Engineering
Hualin Zhang et al.
JOURNAL OF BIOACTIVE AND COMPATIBLE POLYMERS (2010)
Morphology and Pore Size Distribution of Biocompatible Interconnected Porous Poly(L-lactic acid) Foams with Nanofibrous Structure Prepared by Thermally Induced Liquid-Liquid Phase Separation
Shirong Li et al.
JOURNAL OF MACROMOLECULAR SCIENCE PART B-PHYSICS (2010)
Biomimetic coatings for bone tissue engineering of critical-sized defects
Yuelian Liu et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2010)
A morphological study of porous polylactide scaffolds prepared by thermally induced phase separation
Jui-Shui Chen et al.
JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2010)
Polyurethane (PU) scaffolds prepared by solvent casting/particulate leaching (SCPL) combined with centrifugation
DongChoon Sin et al.
MATERIALS SCIENCE & ENGINEERING C-MATERIALS FOR BIOLOGICAL APPLICATIONS (2010)
Polymeric materials for bone and cartilage repair
D. Puppi et al.
PROGRESS IN POLYMER SCIENCE (2010)
Biphasic Calcium Phosphate Ceramics for Bone Regeneration and Tissue Engineering Applications
Sonja Ellen Lobo et al.
MATERIALS (2010)
The nanocomposite scaffold of poly(lactide-co-glycolide) and hydroxyapatite surface-grafted with L-lactic acid oligomer for bone repair
Yang Cui et al.
ACTA BIOMATERIALIA (2009)
The correlation of pore morphology, interconnectivity and physical properties of 3D ceramic scaffolds with bone ingrowth
Anthony C. Jones et al.
BIOMATERIALS (2009)
Biomimetic nanofibrous gelatin/apatite composite scaffolds for bone tissue engineering
Xiaohua Liu et al.
BIOMATERIALS (2009)
Phase separation, pore structure, and properties of nanofibrous gelatin scaffolds
Xiaohua Liu et al.
BIOMATERIALS (2009)
Multinozzle Low-Temperature Deposition System for Construction of Gradient Tissue Engineering Scaffolds
Li Liu et al.
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH PART B-APPLIED BIOMATERIALS (2009)
A review on biodegradable polymeric materials for bone tissue engineering applications
Muhammad Iqbal Sabir et al.
JOURNAL OF MATERIALS SCIENCE (2009)
Fabrication of porous poly(L-lactide) (PLLA) scaffolds for tissue engineering using liquid-liquid phase separation and freeze extraction
L. Budyanto et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)
Synthesis and characterization of nanoporous polycaprolactone membranes via thermally- and nonsolvent-induced phase separations for biomedical device application
Chi Yen et al.
JOURNAL OF MEMBRANE SCIENCE (2009)
Hierarchical starch-based fibrous scaffold for bone tissue engineering applications
Albino Martins et al.
JOURNAL OF TISSUE ENGINEERING AND REGENERATIVE MEDICINE (2009)
Fabrication and characterization of poly(L-lactic acid) 3D nanofibrous scaffolds with controlled architecture by liquid-liquid phase separation from a ternary polymer-solvent system
Liumin He et al.
POLYMER (2009)
Novel fabrication techniques to produce microspheres by thermally induced phase separation for tissue engineering and drug delivery
Jonny J. Blaker et al.
ACTA BIOMATERIALIA (2008)
Manufacture of degradable polymeric scaffolds for bone regeneration
Zigang Ge et al.
BIOMEDICAL MATERIALS (2008)
Synthesis and characterization of nano-hydroxyapatite rods/poly(L-lactide acid) composite scaffolds for bone tissue engineering
E. Nejati et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Formation of anisotropic microporous isotactic polypropylene (iPP) membrane via thermally induced phase separation
Benzhe Luo et al.
DESALINATION (2008)
PLLA/PLA scaffolds prepared via Thermally Induced Phase Separation (TIPS): tuning of properties and biodegradability
V. La Carrubba et al.
INTERNATIONAL JOURNAL OF MATERIAL FORMING (2008)
Preparation and properties of poly(lactide-co-glycolide) (PLGA)/nano-hydroxyapatite (NHA) scaffolds by thermally induced phase separation and rabbit MSCs culture on scaffolds
Y. X. Huang et al.
JOURNAL OF BIOMATERIALS APPLICATIONS (2008)
Biological materials: Structure and mechanical properties
Marc André Meyers et al.
PROGRESS IN MATERIALS SCIENCE (2007)
Ceramic composites as matrices and scaffolds for drug delivery in tissue engineering
W. J. E. M. Habraken et al.
ADVANCED DRUG DELIVERY REVIEWS (2007)
Biodegradable polymers applied in tissue engineering research: a review
Monique Martina et al.
POLYMER INTERNATIONAL (2007)
PLLA scaffolds with biomimetic apatite coating and biomimetic apatite/collagen composite coating to enhance osteoblast-like cells attachment and activity
Yun Chen et al.
SURFACE & COATINGS TECHNOLOGY (2006)
Specially elaborated thermally induced phase separation to fabricate poly(L-lactic acid) scaffolds with ultra large pores and good interconnectivity
Yihong Gong et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Porogen-based solid freeform fabrication of polycaprolactone-calcium phosphate scaffolds for tissue engineering
Mark J. Mondrinos et al.
BIOMATERIALS (2006)
Poly(lactide-co-glycolide)/hydroxyapatite composite scaffolds for bone tissue engineering
SS Kim et al.
BIOMATERIALS (2006)
Bone tissue engineering using polycaprolactone scaffolds fabricated via selective laser sintering
JM Williams et al.
BIOMATERIALS (2005)
Fabrication of three-dimensional porous scaffolds of complicated shape for tissue engineering. I. Compression molding based on flexible-rigid combined mold
LB Wu et al.
TISSUE ENGINEERING (2005)
Porous scaffold design for tissue engineering
SJ Hollister
NATURE MATERIALS (2005)
Preparation and characterization of highly porous, biodegradable polyurethane scaffolds for soft tissue applications
JJ Guan et al.
BIOMATERIALS (2005)
A facile preparation of highly interconnected macroporous PLGA scaffolds by liquid-liquid phase separation II
KC Shin et al.
POLYMER (2005)
Porosity of 3D biomaterial scaffolds and osteogenesis
V Karageorgiou et al.
BIOMATERIALS (2005)
Polymeric scaffolds for bone tissue engineering
XH Liu et al.
ANNALS OF BIOMEDICAL ENGINEERING (2004)
Structure and properties of nano-hydroxyapatite/polymer composite scaffolds for bone tissue engineering
GB Wei et al.
BIOMATERIALS (2004)
Scaffold-based tissue engineering: rationale for computer-aided design and solid free-form fabrication systems
DW Hutmacher et al.
TRENDS IN BIOTECHNOLOGY (2004)
Preparation of porous scaffolds by using freeze-extraction and freeze-gelation methods
MH Ho et al.
BIOMATERIALS (2004)
Fabrication and characterization of hydrophilic poly(lactic-co-glycolic acid)/poly(vinyl alcohol) blend cell scaffolds by melt-molding particulate-leaching method
SH Oh et al.
BIOMATERIALS (2003)
The fabrication and characterization of poly(lactic acid) scaffolds for tissue engineering by improved solid-liquid phase separation
CF Tu et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2003)
A biodegradable nanofiber scaffold by electrospinning and its potential for bone tissue engineering
H Yoshimoto et al.
BIOMATERIALS (2003)
Fabrication of a novel porous PGA-chitosan hybrid matrix for tissue engineering
YC Wang et al.
BIOMATERIALS (2003)
A facile preparation of highly interconnected macroporous poly(D,L-lactic acid-co-glycolic acid) (PLGA) scaffolds by liquid-liquid phase separation of a PLGA-dioxane-water ternary system
FJ Hua et al.
POLYMER (2003)
Novel bioresorbable and bioactive composites based on bioactive glass and polylactide foams for bone tissue engineering
JA Roether et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2002)
Effect of polypropylene molecular weight on porous membrane formation by thermally induced phase separation
H Matsuyama et al.
JOURNAL OF MEMBRANE SCIENCE (2002)
Scaffolds in tissue engineering bone and cartilage
DW Hutmacher
BIOMATERIALS (2000)
Fundamentals of biomechanics in tissue engineering of bone
KA Athanasiou et al.
TISSUE ENGINEERING (2000)