相关参考文献
注意:仅列出部分参考文献,下载原文获取全部文献信息。Fully printed organic tandem solar cells using solution-processed silver nanowires and opaque silver as charge collecting electrodes
Fei Guo et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
All That Glisters Is Not Gold: An Analysis of the Synthetic Complexity of Efficient Polymer Donors for Polymer Solar Cells
Riccardo Po et al.
MACROMOLECULES (2015)
High efficiency, fully inkjet printed organic solar cells with freedom of design
T. M. Eggenhuisen et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Gravure-Printed ZnO in Fully Roll-to-Roll Printed Inverted Organic Solar Cells: Optimization of Adhesion and Performance
Marja Vilkman et al.
ENERGY TECHNOLOGY (2015)
Roll-to-roll gravure printing of organic photovoltaic modulesinsulation of processing defects by an interfacial layer
Palvi Apilo et al.
PROGRESS IN PHOTOVOLTAICS (2015)
25th Anniversary Article: Rise to Power - OPV-Based Solar Parks
Frederik C. Krebs et al.
ADVANCED MATERIALS (2014)
Scalable, ambient atmosphere roll-to-roll manufacture of encapsulated large area, flexible organic tandem solar cell modules
Thomas R. Andersen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
From lab to fab: how must the polymer solar cell materials design change? - an industrial perspective
Riccardo Po et al.
ENERGY & ENVIRONMENTAL SCIENCE (2014)
A rational method for developing and testing stable flexible indium- and vacuum-free multilayer tandem polymer solar cells comprising up to twelve roll processed layers
Thomas R. Andersen et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)
ITO-free organic solar cells with roll-to-roll coated organic functional layers from non-halogenated solvents
Deepak Kaduwal et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2014)
Scaling Up ITO-Free Solar Cells
Yulia Galagan et al.
ADVANCED ENERGY MATERIALS (2014)
Carbon: The Ultimate Electrode Choice for Widely Distributed Polymer Solar Cells
Gisele A. dos Reis Benatto et al.
ADVANCED ENERGY MATERIALS (2014)
Mild wetting poor solvent induced hydrogen bonding interactions for improved performance in bulk heterojunction solar cells
Sai-Anand Gopalan et al.
JOURNAL OF MATERIALS CHEMISTRY A (2014)
Effect of synthetic accessibility on the commercial viability of organic photovoltaics
Timothy P. Osedach et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Universal statistics of parasitic shunt formation in solar cells, and its implications for cell to module efficiency gap
Sourabh Dongaonkar et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Roll-to-Roll fabrication of large area functional organic materials
Roar R. Sondergaard et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2013)
Roll-to-roll embedded conductive structures integrated into organic photovoltaic devices
H. J. van de Wiel et al.
NANOTECHNOLOGY (2013)
Key factors to improve the efficiency of roll-to-roll printed organic photovoltaics
Christos Koidis et al.
ORGANIC ELECTRONICS (2013)
Scalability and stability of very thin, roll-to-roll processed, large area, indium-tin-oxide free polymer solar cell modules
Dechan Angmo et al.
ORGANIC ELECTRONICS (2013)
The state of organic solar cells-A meta analysis
Mikkel Jorgensen et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Polymer and organic solar cells viewed as thin film technologies: What it will take for them to become a success outside academia
Frederik C. Krebs et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Effect of process parameters on the morphology and nanostructure of roll-to-roll printed P3HT:PCBM thin films for organic photovoltaics
C. Koidis et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
Organic photovoltaic modules fabricated by an industrial gravure printing proofer
Junliang Yang et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2013)
A polymer tandem solar cell with 10.6% power conversion efficiency
Jingbi You et al.
NATURE COMMUNICATIONS (2013)
Inkjet Printing of Back Electrodes for Inverted Polymer Solar Cells
Dechan Angmo et al.
ADVANCED ENERGY MATERIALS (2013)
The case for organic photovoltaics
Seth B. Darling et al.
RSC ADVANCES (2013)
It is all in the Pattern-High-Efficiency Power Extraction from Polymer Solar Cells through High-Voltage Serial Connection
Peter Sommer-Larsen et al.
ENERGY TECHNOLOGY (2013)
Fast Inline Roll-to-Roll Printing for Indium-Tin-Oxide-Free Polymer Solar Cells Using Automatic Registration
Markus Hosel et al.
ENERGY TECHNOLOGY (2013)
Freely available OPV-The fast way to progress
Frederik C. Krebs et al.
ENERGY TECHNOLOGY (2013)
Influence of a novel fluorosurfactant modified PEDOT:PSS hole transport layer on the performance of inverted organic solar cells
Fang Jeng Lim et al.
JOURNAL OF MATERIALS CHEMISTRY (2012)
Femtoliter-Scale Patterning by High-Speed, Highly Scaled Inverse Gravure Printing
Rungrot Kitsomboonoha et al.
LANGMUIR (2012)
Silver front electrode grids for ITO-free all printed polymer solar cells with embedded and raised topographies, prepared by thermal imprint, flexographic and inkjet roll-to-roll processes
Jong-Su Yu et al.
NANOSCALE (2012)
Roll-to-roll fabrication of polymer solar cells
Roar Sondergaard et al.
MATERIALS TODAY (2012)
Evaluation of ink-jet printed current collecting grids and busbars for ITO-free organic solar cells
Yulia Galagan et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Life cycle assessment of ITO-free flexible polymer solar cells prepared by roll-to-roll coating and printing
Nieves Espinosa et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Polymer- and carbon-based electrodes for polymer solar cells: Toward low-cost, continuous fabrication over large area
Riccardo Po et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Aerosol jet printed grid for ITO-free inverted organic solar cells
Palvi Kopola et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Gravure printing inverted organic solar cells: The influence of ink properties on film quality and device performance
Monika M. Voigt et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2012)
Emerging Transparent Electrodes Based on Thin Films of Carbon Nanotubes, Graphene, and Metallic Nanostructures
David S. Hecht et al.
ADVANCED MATERIALS (2011)
Technology development for roll-to-roll production of organic photovoltaics
Yulia Galagan et al.
CHEMICAL ENGINEERING AND PROCESSING-PROCESS INTENSIFICATION (2011)
Life-cycle analysis of product integrated polymer solar cells
Nieves Espinosa et al.
ENERGY & ENVIRONMENTAL SCIENCE (2011)
Miscibility, Crystallinity, and Phase Development in P3HT/PCBM Solar Cells: Toward an Enlightened Understanding of Device Morphology and Stability
Brian A. Collins et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2011)
Hierarchical Nanomorphologies Promote Exciton Dissociation in Polymer/Fullerene Bulk Heterojunction Solar Cells
Wei Chen et al.
NANO LETTERS (2011)
Gravure printing for three subsequent solar cell layers of inverted structures on flexible substrates
Monika M. Voigt et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
A life cycle analysis of polymer solar cell modules prepared using roll-to-roll methods under ambient conditions
Nieves Espinosa et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Gravure printed flexible organic photovoltaic modules
Palvi Kopola et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2011)
Printed Paper Photovoltaic Cells
Arved Huebler et al.
ADVANCED ENERGY MATERIALS (2011)
Product integration of compact roll-to-roll processed polymer solar cell modules: methods and manufacture using flexographic printing, slot-die coating and rotary screen printing
Frederik C. Krebs et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Upscaling of polymer solar cell fabrication using full roll-to-roll processing
Frederik C. Krebs et al.
NANOSCALE (2010)
High efficient plastic solar cells fabricated with a high-throughput gravure printing method
P. Kopola et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2010)
A roll-to-roll process to flexible polymer solar cells: model studies, manufacture and operational stability studies
Frederik C. Krebs et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
All solution roll-to-roll processed polymer solar cells free from indium-tin-oxide and vacuum coating steps
Frederik C. Krebs
ORGANIC ELECTRONICS (2009)
Patternable polymer bulk heterojunction photovoltaic cells on plastic by rotogravure printing
Jau M. Ding et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Reel-to-reel wet coating as an efficient up-scaling technique for the production of bulk-heterojunction polymer solar cells
Lars Blankenburg et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Effect of P3HT:PCBM concentration in solvent on performances of organic solar cells
Woon-Hyuk Baek et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Polymer solar cell modules prepared using roll-to-roll methods: Knife-over-edge coating, slot-die coating and screen printing
Frederik C. Krebs
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2009)
Design rules for donors in bulk-heterojunction solar cells -: Towards 10 % energy-conversion efficiency
MC Scharber et al.
ADVANCED MATERIALS (2006)