相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。A laboratory system for element specific hyperspectral X-ray imaging
Simon D. M. Jacques et al.
ANALYST (2013)
A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage
D. J. Bull et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
A novel architecture for pore network modelling with applications to permeability of porous media
Andrey P. Jivkov et al.
JOURNAL OF HYDROLOGY (2013)
Metamorphosis revealed: time-lapse three-dimensional imaging inside a living chrysalis
Tristan Lowe et al.
JOURNAL OF THE ROYAL SOCIETY INTERFACE (2013)
Characterization of multi-scale microstructural features in Opalinus Clay
Lukas M. Keller et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2013)
Revealing the three dimensional internal structure of aluminium alloys
George Edward Thompson et al.
SURFACE AND INTERFACE ANALYSIS (2013)
4D damage characterization during superplastic deformation of magnesium alloys
Pierre Lhuissier et al.
SUPERPLASTICITY IN ADVANCED MATERIALS (2013)
Polycrystal model of the mechanical behavior of a Mo-TiC30 vol.% metal-ceramic composite using a three-dimensional microstructure map obtained by dual beam focused ion beam scanning electron microscopy
D. Cedat et al.
ACTA MATERIALIA (2012)
Quantifying the effect of porosity on the evolution of deformation and damage in Sn-based solder joints by X-ray microtomography and microstructure-based finite element modeling
E. Padilla et al.
ACTA MATERIALIA (2012)
Observation of recovery and recrystallization in high-purity aluminum measured with forward modeling analysis of high-energy diffraction microscopy
Christopher M. Hefferan et al.
ACTA MATERIALIA (2012)
Resolving the Three-Dimensional Microstructure of Polymer Electrolyte Fuel Cell Electrodes using Nanometer-Scale X-ray Computed Tomography
William K. Epting et al.
ADVANCED FUNCTIONAL MATERIALS (2012)
A minute fossil phoretic mite recovered by phase-contrast X-ray computed tomography
Jason A. Dunlop et al.
BIOLOGY LETTERS (2012)
Fiber bundle push-out test and image-based finite element simulation for 3D carbon/carbon composites
Rajneesh Sharma et al.
CARBON (2012)
X-ray damage characterisation in self-healing fibre reinforced polymers
G. P. McCombe et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
In situ tomographic investigation on the early hydration behaviors of cementing systems
D. Gastaldi et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Three-dimensional microstructural modeling of asphalt concrete using a unified viscoelastic-viscoplastic-viscodamage model
Taesun You et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Development of a micromechanical finite element model from computed tomography images for shear modulus simulation of asphalt mixtures
Erdem Coleri et al.
CONSTRUCTION AND BUILDING MATERIALS (2012)
Damage tolerant design of cast components based on defects detected by 3D X-ray computed tomography
M. Shirani et al.
INTERNATIONAL JOURNAL OF FATIGUE (2012)
Imaging of grain-level orientation and strain in thicker metallic polycrystals by high energy transmission micro-beam Laue (HETL) diffraction techniques
Felix Hofmann et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2012)
In-situ X-ray microtomography study of the movement of a granular material within a die
Samuel A. McDonald et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2012)
Freeze casting of porous materials: review of critical factors in microstructure evolution
W. L. Li et al.
INTERNATIONAL MATERIALS REVIEWS (2012)
Fast In Situ X-Ray Microtomography Observations of Solidification and Semisolid Deformation of Al-Cu Alloys
Michel Suery et al.
JOM (2012)
Quantitative 3D Characterization of Solidification Structure and Defect Evolution in Al Alloys
C. Puncreobutr et al.
JOM (2012)
Diffraction microcomputed tomography of an Al-matrix SiC-monofilament composite
Stuart R. Stock et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2012)
Diffraction/scattering computed tomography for three-dimensional characterization of multi-phase crystalline and amorphous materials
M. Alvarez-Murga et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2012)
3D real-time micromechanical compressive behaviour of bone-cement interface: Experimental and finite element studies
Gianluca Tozzi et al.
JOURNAL OF BIOMECHANICS (2012)
Zone-doubled Fresnel zone plates for high-resolution hard X-ray full-field transmission microscopy
Joan Vila-Comamala et al.
JOURNAL OF SYNCHROTRON RADIATION (2012)
A hard X-ray nanoprobe beamline for nanoscale microscopy
Robert P. Winarski et al.
JOURNAL OF SYNCHROTRON RADIATION (2012)
Multi Length Scale Microstructural Investigations of a Commercially Available Li-Ion Battery Electrode
P. R. Shearing et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2012)
Macro and intergranular stress responses of austenitic stainless steel to 90° strain path changes
D. Gonzalez et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Sub-micrometre holotomographic characterisation of the effects of solution heat treatment on an AlMg7.3Si3.5 alloy
D. Tolnai et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2012)
Benefits of metal foams and developments in modelling techniques to assess their materials behaviour: a review
C. Betts
MATERIALS SCIENCE AND TECHNOLOGY (2012)
Microstructure-Based Models for Multi-Functional Material Systems
M. D. Sarzynski et al.
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES (2012)
Resolution effect on the study of ductile damage using synchrotron X-ray tomography
C. Landron et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2012)
Real space soft x-ray imaging at 10 nm spatial resolution
W. Chao et al.
OPTICS EXPRESS (2012)
Theoretical comparison of three X-ray phase-contrast imaging techniques: propagation-based imaging, analyzer-based imaging and grating interferometry
P. C. Diemoz et al.
OPTICS EXPRESS (2012)
Hard-X-ray imaging optics based on four aspherical mirrors with 50 nm resolution
Satoshi Matsuyama et al.
OPTICS EXPRESS (2012)
Evolution of crack-bridging and crack-tip driving force during the growth of a fatigue crack in a Ti/SiC composite
Philip J. Withers et al.
PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2012)
Non-destructive 3-D reconstruction of the martensitic phase in a dual-phase steel using synchrotron holotomography
C. Landron et al.
SCRIPTA MATERIALIA (2012)
Three-dimensional grain structure of sintered bulk strontium titanate from X-ray diffraction contrast tomography
M. Syha et al.
SCRIPTA MATERIALIA (2012)
Exploring microstructural changes associated with oxidation in Ni-YSZ SOFC electrodes using high resolution X-ray computed tomography
P. R. Shearing et al.
SOLID STATE IONICS (2012)
Improving the Estimations of Petrophysical Transport Behavior of Carbonate Rocks Using a Dual Pore Network Approach Combined with Computed Microtomography
D. Bauer et al.
TRANSPORT IN POROUS MEDIA (2012)
Grain-scale experimental investigation of localised deformation in sand: a discrete particle tracking approach
Edward Ando et al.
ACTA GEOTECHNICA (2012)
In-Line Phase-Contrast X-ray Imaging and Tomography for Materials Science
Sheridan C. Mayo et al.
MATERIALS (2012)
Development of fast and high throughput tomography using CMOS image detector at SPring-8
Kentaro Uesugi et al.
DEVELOPMENTS IN X-RAY TOMOGRAPHY VIII (2012)
Characterization of hierarchical pore structures in ceramics using multiscale tomography
F. Tariq et al.
ACTA MATERIALIA (2011)
Extraction of fibre network architecture by X-ray tomography and prediction of elastic properties using an affine analytical model
D. Tsarouchas et al.
ACTA MATERIALIA (2011)
Permeability, pore connectivity and critical pore throat control of expandable polymeric sphere templated macroporous alumina
Linnea Andersson et al.
ACTA MATERIALIA (2011)
Three-dimensional in situ observations of short fatigue crack growth in magnesium
A. King et al.
ACTA MATERIALIA (2011)
In situ observation of ductile fracture using X-ray tomography technique
H. Toda et al.
ACTA MATERIALIA (2011)
Void growth in copper during high-temperature power-law creep
K. Dzieciol et al.
ACTA MATERIALIA (2011)
3-D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography
Michael Herbig et al.
ACTA MATERIALIA (2011)
Validation of void growth models using X-ray microtomography characterization of damage in dual phase steels
C. Landron et al.
ACTA MATERIALIA (2011)
3-D observations of short fatigue crack interaction with lamellar and duplex microstructures in a two-phase titanium alloy
S. Birosca et al.
ACTA MATERIALIA (2011)
Three-dimensional rigid multiphase networks providing high-temperature strength to cast AlSi10Cu5Ni1-2 piston alloys
Z. Asghar et al.
ACTA MATERIALIA (2011)
Analysis of Snow Microstructure by Means of X-Ray Diffraction Contrast Tomography
Sabine Rolland du Roscoat et al.
ADVANCED ENGINEERING MATERIALS (2011)
3D Crack-tip Microscopy: Illuminating Micro-Scale Effects on Crack-Tip Behavior
Philip J. Withers
ADVANCED ENGINEERING MATERIALS (2011)
Dynamic X-Ray Diffraction Computed Tomography Reveals Real-Time Insight into Catalyst Active Phase Evolution
Simon D. M. Jacques et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2011)
Estimation of local stresses and elastic properties of a mortar sample by FFT computation of fields on a 3D image
J. Escoda et al.
CEMENT AND CONCRETE RESEARCH (2011)
The influence of nanoscale microstructural variations on the pellet scale flow properties of hierarchical porous catalytic structures using multiscale 3D imaging
F. Tariq et al.
CHEMICAL ENGINEERING SCIENCE (2011)
Experimental and FEM analysis of the material response of porous metals imposed to mechanical loading
N. Michailidis et al.
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS (2011)
Advanced numerical method for generation of three-dimensional particles and its application in microstructure-based simulation of fatigue behavior
M. Milesi et al.
COMPUTATIONAL MATERIALS SCIENCE (2011)
Two- and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography images
Qingli Dai
CONSTRUCTION AND BUILDING MATERIALS (2011)
The study of intergranular corrosion in aircraft aluminium alloys using X-ray tomography
S. P. Knight et al.
CORROSION SCIENCE (2011)
Using Synchrotron X-Ray Nano-CT to Characterize SOFC Electrode Microstructures in Three-Dimensions at Operating Temperature
P. R. Shearing et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2011)
Damage quantification in aluminium alloys using in situ tensile tests in X-ray tomography
Eric Maire et al.
ENGINEERING FRACTURE MECHANICS (2011)
Towards High Performance Digital Volume Correlation
M. Gates et al.
EXPERIMENTAL MECHANICS (2011)
Voxel-Scale Digital Volume Correlation
H. Leclerc et al.
EXPERIMENTAL MECHANICS (2011)
Analysis of coke under compressive loading: A combined approach using micro-computed tomography, finite element analysis, and empirical models of porous structures
Naomi Tsafnat et al.
FUEL (2011)
Observing strain localisation processes in bio-cemented sand using x-ray imaging
Francesco Tagliaferri et al.
GRANULAR MATTER (2011)
DART: A Practical Reconstruction Algorithm for Discrete Tomography
Kees Joost Batenburg et al.
IEEE TRANSACTIONS ON IMAGE PROCESSING (2011)
LARGE-SCALE COMPUTATIONS OF EFFECTIVE ELASTIC PROPERTIES OF RUBBER WITH CARBON BLACK FILLERS
Aurelie Jean et al.
International Journal for Multiscale Computational Engineering (2011)
Microtomographic study and finite element analysis of the porosity harmfulness in a cast aluminium alloy
N. Vanderesse et al.
INTERNATIONAL JOURNAL OF FATIGUE (2011)
Modeling the viscoplastic micromechanical response of two-phase materials using Fast Fourier Transforms
S. -B. Lee et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2011)
Analytical and numerical prediction of heat transfer and pressure drop in open-cell metal foams
Mo Bai et al.
INTERNATIONAL JOURNAL OF THERMAL SCIENCES (2011)
Characterization of creep and creep damage by in-situ microtomography
Andras Borbely et al.
JOM (2011)
High-energy diffraction microscopy at the advanced photon source
U. Lienert et al.
JOM (2011)
Numerical simulation of asphalt mixture based on three-dimensional heterogeneous specimen
Zhang Xiao-ning et al.
JOURNAL OF CENTRAL SOUTH UNIVERSITY OF TECHNOLOGY (2011)
Random geometric graphs for modelling the pore space of fibre-based materials
Ralf Thiedmann et al.
JOURNAL OF MATERIALS SCIENCE (2011)
Region-of-interest tomography using filtered backprojection: assessing the practical limits
A. Kyrieleis et al.
JOURNAL OF MICROSCOPY (2011)
Computational multiscale modeling of intergranular cracking
Igor Simonovski et al.
JOURNAL OF NUCLEAR MATERIALS (2011)
Quantitative analysis of micro structural and conductivity evolution of Ni-YSZ anodes during thermal cycling based on nano-computed tomography
Yong Guan et al.
JOURNAL OF POWER SOURCES (2011)
Analysis of the three-dimensional microstructure of a solid-oxide fuel cell anode using nano X-ray tomography
Yong Guan et al.
JOURNAL OF POWER SOURCES (2011)
MECHANICAL BEHAVIOR OF CERAMIC VENEER IN ZIRCONIA-BASED RESTORATIONS: A 3-DIMENSIONAL FINITE ELEMENT ANALYSIS USING MICROCOMPUTED TOMOGRAPHY DATA
Eduardo Passos Rocha et al.
JOURNAL OF PROSTHETIC DENTISTRY (2011)
Digital volume correlation analyses of synchrotron tomographic images
J. Rethore et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2011)
Far-field high-energy diffraction microscopy: a tool for intergranular orientation and strain analysis
J. V. Bernier et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2011)
Three-Dimensional Analysis of High-Resolution X-Ray Computed Tomography Data with Morpho+
Loes Brabant et al.
MICROSCOPY AND MICROANALYSIS (2011)
Quantification of a Single Aggregate Inner Porosity and Pore Accessibility Using Hard X-ray Phase-Contrast Nanotomography
Pavel Trtik et al.
LANGMUIR (2011)
Grain-resolved elastic strains in deformed copper measured by three-dimensional X-ray diffraction
Jette Oddershede et al.
MATERIALS CHARACTERIZATION (2011)
Finite element analysis of the mechanical properties of cellular aluminium based on micro-computed tomography
C. Veyhl et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
A mesoscale quantification method of cavitation in semicrystalline polymers using X-ray microtomography
E. Rosenberg et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures
S. Van Bael et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
In situ 3D X-ray microtomography study comparing auxetic and non-auxetic polymeric foams under tension
Samuel A. McDonald et al.
PHYSICA STATUS SOLIDI B-BASIC SOLID STATE PHYSICS (2011)
Age-related changes in the plasticity and toughness of human cortical bone at multiple length scales
Elizabeth A. Zimmermann et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2011)
Experimental facility for two-and three-dimensional ultrafast electron beam x-ray computed tomography
T. Stuerzel et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2011)
A method for the 3-D quantification of bridging ligaments during crack propagation
L. Babout et al.
SCRIPTA MATERIALIA (2011)
Ductile crack initiation and propagation assessed via in situ synchrotron radiation-computed laminography
T. F. Morgeneyer et al.
SCRIPTA MATERIALIA (2011)
Hierarchically structured titanium foams for tissue scaffold applications
R. Singh et al.
ACTA BIOMATERIALIA (2010)
In vivo corrosion and corrosion protection of magnesium alloy LAE442
F. Witte et al.
ACTA BIOMATERIALIA (2010)
Influence of closure on the 3D propagation of fatigue cracks in a nodular cast iron investigated by X-ray tomography and 3D volume correlation
Nathalie Limodin et al.
ACTA MATERIALIA (2010)
The evolution of crack-tip stresses during a fatigue overload event
A. Steuwer et al.
ACTA MATERIALIA (2010)
Coarsening mechanisms in a dendritic Al-10% Cu alloy
S. Terzi et al.
ACTA MATERIALIA (2010)
Applying SEM-Based X-ray Microtomography to Observe Self-Healing in Solvent Encapsulated Thermoplastic Materials
Steven D. Mookhoek et al.
ADVANCED ENGINEERING MATERIALS (2010)
Constituent Particle Break-Up During Hot Rolling of AA 5182
Nicolas Moulin et al.
ADVANCED ENGINEERING MATERIALS (2010)
Combined Use of Synchrotron-Radiation-Based Imaging Techniques for the Characterization of Structured Catalysts
Francesco Basile et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
A virtual experimental approach to estimate composite mechanical properties: Modeling with an explicit finite element method
Boming Zhang et al.
COMPUTATIONAL MATERIALS SCIENCE (2010)
Three dimensional experimental and numerical multiscale analysis of a fatigue crack
Johann Rannou et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2010)
A review of algorithms for medical image segmentation and their applications to the female pelvic cavity
Zhen Ma et al.
COMPUTER METHODS IN BIOMECHANICS AND BIOMEDICAL ENGINEERING (2010)
Threshold Fine-Tuning and 3D Characterisation of Porous Media Using X-ray Nanotomography
Hossein Ostadi et al.
CURRENT NANOSCIENCE (2010)
In Situ Experiments with X ray Tomography: an Attractive Tool for Experimental Mechanics
J. -Y. Buffiere et al.
EXPERIMENTAL MECHANICS (2010)
Discrete and continuum analysis of localised deformation in sand using X-ray μCT and volumetric digital image correlation
S. A. Hall et al.
GEOTECHNIQUE (2010)
In-situ observation of creep damage evolution in Al-Al2O3 MMCs by synchrotron X-ray microtomography
M. Huppmann et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2010)
Fast in-situ X-ray micro tomography characterisation of microstructural evolution and strain-induced damage in alloys at various temperatures
Michel Suery et al.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH (2010)
Characterization of Polycrystalline Materials Using Synchrotron X-ray Imaging and Diffraction Techniques
W. Ludwig et al.
JOM (2010)
Determining grain resolved stresses in polycrystalline materials using three-dimensional X-ray diffraction
Jette Oddershede et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2010)
The direct examination of three-dimensional bone architecture in vitro by computed tomography
Lee A. Feldkamp et al.
JOURNAL OF BONE AND MINERAL RESEARCH (2010)
Quantification of porosity in Acropora pulchra (Brook 1891) using X-ray micro-computed tomography techniques
Ronan C. Roche et al.
JOURNAL OF EXPERIMENTAL MARINE BIOLOGY AND ECOLOGY (2010)
X-Ray Computed Tomography-Based Modeling of Polymeric Foams: The Effect of Finite Element Model Size on the Large Strain Response
J. G. F. Wismans et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2010)
A priori information in a regularized sinogram-based method for removing ring artefacts in tomography
Sofya Titarenko et al.
JOURNAL OF SYNCHROTRON RADIATION (2010)
Synchrotron radiation computed laminography for polymer composite failure studies
Feng Xu et al.
JOURNAL OF SYNCHROTRON RADIATION (2010)
Nanoscale X-Ray Microscopic Imaging of Mammalian Mineralized Tissue
Joy C. Andrews et al.
MICROSCOPY AND MICROANALYSIS (2010)
Proposal of a method to analyze 3D deformation/fracture characteristics inside materials based on a stratified matching approach
Mitsuru Nakazawa et al.
MACHINE VISION AND APPLICATIONS (2010)
Ultra-small angle neutron scattering and X-ray tomography studies of caseinate-hydroxyapatite microporous materials
C. Ritzoulis et al.
MATERIALS CHEMISTRY AND PHYSICS (2010)
The role of Ni and Fe aluminides on the elevated temperature strength of an AlSi12 alloy
Z. Asghar et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Nondestructive Observation of Pore Structures of A1050 Porous Aluminum Fabricated by Friction Stir Processing
Yoshihiko Hangai et al.
MATERIALS TRANSACTIONS (2010)
Zernike phase contrast in scanning microscopy with X-rays
Christian Holzner et al.
NATURE PHYSICS (2010)
Finite element simulation of the plastic collapse of closed-cell aluminum foams with X-ray computed tomography
Insu Jeon et al.
MECHANICS OF MATERIALS (2010)
Three-Dimensional Microstructure Visualization of Porosity and Fe-Rich Inclusions in SiC Particle-Reinforced Al Alloy Matrix Composites by X-Ray Synchrotron Tomography
Flavio de Andrade Silva et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
In situ investigation of ceramic sintering by synchrotron radiation X-ray computed tomography
Feng Xu et al.
OPTICS AND LASERS IN ENGINEERING (2010)
Combining X-ray microtomography with computer simulation for analysis of granular and porous materials
Roberto Moreno-Atanasio et al.
PARTICUOLOGY (2010)
Tests of microstructure reconstruction by forward modeling of high energy X-ray diffraction microscopy data
C. M. Hefferan et al.
POWDER DIFFRACTION (2010)
Characterization and modeling of void nucleation by interface decohesion in dual phase steels
C. Landron et al.
SCRIPTA MATERIALIA (2010)
Combining tomographic imaging and DEM simulations to investigate the structure of experimental sphere packings
Gary W. Delaney et al.
SOFT MATTER (2010)
Crack closure and stress intensity factor measurements in nodular graphite cast iron using three-dimensional correlation of laboratory X-ray microtomography images
Nathalie Limodin et al.
ACTA MATERIALIA (2009)
Growth behavior of hydrogen micropores in aluminum alloys during high-temperature exposure
H. Toda et al.
ACTA MATERIALIA (2009)
An X-ray microtomographic and finite element modeling approach for the prediction of semi-solid deformation behaviour in Al-Cu alloys
D. Fuloria et al.
ACTA MATERIALIA (2009)
Three-dimensional analysis of a compression test on stone wool
Francois Hild et al.
ACTA MATERIALIA (2009)
Using image-based computational modeling to study microstructure-yield correlations in metals
M. A. Siddiq Qidwai et al.
ACTA MATERIALIA (2009)
Quantification of the interaction within defect populations on fatigue behavior in an aluminum alloy
P. Li et al.
ACTA MATERIALIA (2009)
Three-dimensional characterization of fatigue cracks in Ti-6246 using X-ray tomography and electron backscatter diffraction
S. Birosca et al.
ACTA MATERIALIA (2009)
Three-dimensional study of Ni aluminides in an AlSi12 alloy by means of light optical and synchrotron microtomography
Z. Asghar et al.
ACTA MATERIALIA (2009)
In situ and real-time 3-D microtomography investigation of dendritic solidification in an Al-10 wt.% Cu alloy
N. Limodin et al.
ACTA MATERIALIA (2009)
Iterative Reconstruction Technique for Reducing Body Radiation Dose at CT: Feasibility Study
Amy K. Hara et al.
AMERICAN JOURNAL OF ROENTGENOLOGY (2009)
Biomechanics of Dromaeosaurid Dinosaur Claws: Application of X-Ray Microtomography, Nanoindentation, and Finite Element Analysis
Phillip L. Manning et al.
ANATOMICAL RECORD-ADVANCES IN INTEGRATIVE ANATOMY AND EVOLUTIONARY BIOLOGY (2009)
Beam hardening artifacts in micro-computed tomography scanning can be reduced by X-ray beam filtration and the resulting images can be used to accurately measure BMD
Jeffrey A. Meganck et al.
BONE (2009)
Evaluation of three-dimensional and two-dimensional full displacement fields of a single edge notch fracture mechanics specimen, in light of experimental data using X-ray tomography
Yoann Barranger et al.
ENGINEERING FRACTURE MECHANICS (2009)
Prediction of residual fatigue life of aluminium foam through natural frequencies and damping shift
V. Dattoma et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2009)
Stress concentrations in non-convex elastic particles embedded in a ductile matrix
N. Moulin et al.
INTERNATIONAL JOURNAL OF ENGINEERING SCIENCE (2009)
Numerical Simulation of Mechanical Properties of Cellular Materials Using Computed Tomography Analysis
F. Fischer et al.
JOURNAL OF CELLULAR PLASTICS (2009)
Morphological analysis of pores in directionally freeze-cast titanium foams
J. L. Fife et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Quantifying the 3D macrostructure of tissue scaffolds
Julian R. Jones et al.
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN MEDICINE (2009)
Comparative study of predictive FE methods for mechanical properties of nuclear composites
Joshim Ali et al.
JOURNAL OF NUCLEAR MATERIALS (2009)
Digital image correlation and fracture: an advanced technique for estimating stress intensity factors of 2D and 3D cracks
S. Roux et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2009)
A new methodology based on X-ray micro-tomography to estimate stress concentrations around inclusions in high strength steels
A. Stienon et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
In situ single-grain peak profile measurements on Ti-7Al during tensile deformation
U. Lienert et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Image stitching strategies for tomographic imaging of large objects at high resolution at synchrotron sources
A. Kyrieleis et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION A-ACCELERATORS SPECTROMETERS DETECTORS AND ASSOCIATED EQUIPMENT (2009)
Evolution of stress in individual grains and twins in a magnesium alloy aggregate
C. C. Aydiner et al.
PHYSICAL REVIEW B (2009)
Soft-tissue phase-contrast tomography with an x-ray tube source
Martin Bech et al.
PHYSICS IN MEDICINE AND BIOLOGY (2009)
X-ray micro-computed tomography of beech wood and biomorphic C, SiC and Al/SiC composites
T. E. Wilkes et al.
PHILOSOPHICAL MAGAZINE (2009)
Three-dimensional grain mapping by x-ray diffraction contrast tomography and the use of Friedel pairs in diffraction data analysis
W. Ludwig et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2009)
Local crack driving force analysis of a fatigue crack by a microstructural tracking method
P. Qu et al.
SCRIPTA MATERIALIA (2009)
Direct non-destructive observation of bulk nucleation in 30% deformed aluminum
S. S. West et al.
SCRIPTA MATERIALIA (2009)
Sub-micrometer synchrotron tomography of multiphase metals using Kirkpatrick-Baez optics
G. Requena et al.
SCRIPTA MATERIALIA (2009)
In situ X-ray tomography observation of inhomogeneous deformation in semi-solid aluminium alloys
S. Terzi et al.
SCRIPTA MATERIALIA (2009)
In situ three-dimensional X-ray microtomography of an auxetic foam under tension
S. A. McDonald et al.
SCRIPTA MATERIALIA (2009)
Three-dimensional characterization and thermal property modelling of thermally oxidized nuclear graphite
L. Babout et al.
ACTA MATERIALIA (2008)
Visualization by X-ray tomography of void growth and coalescence leading to fracture in model materials
A. Weck et al.
ACTA MATERIALIA (2008)
On the origin of deformation-induced rotation patterns below nanoindents
N. Zaafarani et al.
ACTA MATERIALIA (2008)
Initiation and growth of damage in a dual-phase steel observed by X-ray microtomography
E. Maire et al.
ACTA MATERIALIA (2008)
Modeling the properties of closed-cell cellular materials from tomography images using finite shell elements
O. Caty et al.
ACTA MATERIALIA (2008)
Analytical modelling of the radiative properties of metallic foams: Contribution of X-ray tomography
Mathilde Loretz et al.
ADVANCED ENGINEERING MATERIALS (2008)
Hard x-rays nanoscale fluorescence imaging of earth and planetary science samples
Pierre Bleuet et al.
APPLIED PHYSICS LETTERS (2008)
Digital laminography assessment of the damage in concrete exposed to freezing temperatures
Kentaro Wakimoto et al.
CEMENT AND CONCRETE RESEARCH (2008)
Three-dimensional image correlation from X-ray computed tomography of solid foam
Stephane Roux et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Prediction of the failure locus of C/PEEK composites under transverse compression and longitudinal shear through computational micromechanics
Essam Totry et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2008)
Extended three-dimensional digital image correlation (X3D-DIC)
Julien Rethore et al.
COMPTES RENDUS MECANIQUE (2008)
Recent advances in X-ray microtomography applied to materials
S. R. Stock
INTERNATIONAL MATERIALS REVIEWS (2008)
X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. II. The combined case
Greg Johnson et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2008)
X-ray diffraction contrast tomography: a novel technique for three-dimensional grain mapping of polycrystals. I. Direct beam case
Wolfgang Ludwig et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2008)
Ultra high resolution computed tomography of damage in notched carbon fiber-epoxy composites
P. Wright et al.
JOURNAL OF COMPOSITE MATERIALS (2008)
Probing microstructure dynamics with X-ray diffraction microscopy
R. M. Suter et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2008)
Application of a micromechanics model to the overall properties of heterogeneous graphite
C. Berre et al.
JOURNAL OF NUCLEAR MATERIALS (2008)
Failure analysis of the effects of porosity in thermally oxidised nuclear graphite using finite element modelling
C. Berre et al.
JOURNAL OF NUCLEAR MATERIALS (2008)
Microstructural modelling of nuclear graphite using multi-phase models
C. Berre et al.
JOURNAL OF NUCLEAR MATERIALS (2008)
Metallic foams: Radiative properties/comparison between different models
M. Loretz et al.
JOURNAL OF QUANTITATIVE SPECTROSCOPY & RADIATIVE TRANSFER (2008)
Methods and applications of digital volume correlation
B. K. Bay
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2008)
High energy X-ray scattering tomography applied to bone
S. R. Stock et al.
JOURNAL OF STRUCTURAL BIOLOGY (2008)
3D micro-scale deformations of wood in bending: Synchrotron radiation μCT data analyzed with digital volume correlation
F. Forsberg et al.
JOURNAL OF STRUCTURAL BIOLOGY (2008)
High-resolution tomography of cracks, voids and micro-structure in greywacke and limestone
S. Zabler et al.
JOURNAL OF STRUCTURAL GEOLOGY (2008)
Micro-computed tomography of fatigue microdamage in cortical bone using a barium sulfate contrast agent
Huijie Leng et al.
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS (2008)
Phase contrast X-ray synchrotron imaging: Opening access to fossil inclusions in opaque amber
Malvina Lak et al.
MICROSCOPY AND MICROANALYSIS (2008)
In situ x-ray tomography studies of microstructural evolution combined with 3D modeling
J. -Y Buffiere et al.
MRS BULLETIN (2008)
Experimental determination of strain partitioning among individual grains in the bulk of an aluminium multicrystal
K. Haldrup et al.
MATERIALS CHARACTERIZATION (2008)
In situ 3D quantification of the evolution of creep cavity size, shape, and spatial orientation using synchrotron X-ray tomography
A. Isaac et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Probing the structure of heterogeneous diluted materials by diffraction tomography
Pierre Bleuet et al.
NATURE MATERIALS (2008)
The true toughness of human cortical bone measured with realistically short cracks
K. J. Koester et al.
NATURE MATERIALS (2008)
Comparison between X-ray micro-computed tomography and optical scanning tomography for full 3D strain measurement by digital volume correlation
Arnaud Germaneau et al.
NDT & E INTERNATIONAL (2008)
Prior image constrained compressed sensing (PICCS): A method to accurately reconstruct dynamic CT images from highly undersampled projection data sets
Guang-Hong Chen et al.
MEDICAL PHYSICS (2008)
Observations of intergranular stress corrosion cracking in a grain-mapped polycrystal
A. King et al.
SCIENCE (2008)
Direct observation of 3-D grain growth in Al-0.1% Mn
S. Schmidt et al.
SCRIPTA MATERIALIA (2008)
The shock response of aluminium foams
N. K. Bourne et al.
SCRIPTA MATERIALIA (2008)
Three-dimensional microtomographic study of Widmanstatten microstructures in an alpha/beta titanium alloy
N. Vanderesse et al.
SCRIPTA MATERIALIA (2008)
X-ray nanotomography
Philip J. Withers
MATERIALS TODAY (2007)
Fast X-ray tomography and acoustic emission study of damage in metals during continuous tensile tests
Eric Maire et al.
ACTA MATERIALIA (2007)
Sintering and microstructure of ice: a review
Jane R. Blackford
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2007)
Nanofabrication of high aspect ratio 24 nm x-ray zone plates for x-ray imaging applications
Yan Feng et al.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B (2007)
Computations of permeability tensor coefficients and anisotropy of asphalt concrete based on microstructure simulation of fluid flow
Eyad Masad et al.
COMPUTATIONAL MATERIALS SCIENCE (2007)
Focusing high energy X-rays with stacked Fresnel zone plates
I. Snigireva et al.
PHYSICA STATUS SOLIDI A-APPLICATIONS AND MATERIALS SCIENCE (2007)
Volumetric digital image correlation applied to X-ray microtomography images from triaxial compression tests on argillaceous rock
N. Lenoir et al.
STRAIN (2007)
X-ray computed micro tomography as complementary method for the characterization of activated porous ceramic preforms
S. Vasic et al.
JOURNAL OF MATERIALS RESEARCH (2007)
Estimation of microstructural properties from synchrotron X-ray microtomography and determination of the REV in paper materials
S. Rolland du Roscoat et al.
ACTA MATERIALIA (2007)
In situ investigation by X-ray tomography of the overall and local microstructural changes occurring during partial remelting of an Al-15.8 wt.% Cu alloy
Nathalie Limodin et al.
ACTA MATERIALIA (2007)
Nanoscale zoom tomography with hard x rays using Kirkpatrick-Baez optics
R. Mokso et al.
APPLIED PHYSICS LETTERS (2007)
Finite element simulations of the deformation of fused-cast refractories based on X-ray computed tomography
Kamel Madi et al.
COMPUTATIONAL MATERIALS SCIENCE (2007)
Non-destructive quantitative 3D analysis for the optimisation of tissue scaffolds
Julian R. Jones et al.
BIOMATERIALS (2007)
Representation of real particles for DEM simulation using X-ray tomography
Linbing Wang et al.
CONSTRUCTION AND BUILDING MATERIALS (2007)
Practical error estimation in zoom-in and truncated tomography reconstructions
Xianghui Xiao et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2007)
Characterization of the morphology of cellular ceramics by 3D image processing of X-ray tomography
Eric Maire et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2007)
Forward modeling method for microstructure reconstruction using x-ray diffraction microscopy: Single-crystal verification
R. M. Suter et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2006)
Three-dimensional observation of nanoscopic precipitates in an aluminum alloy by microtomography with Fresnel zone plate optics
H. Toda et al.
APPLIED PHYSICS LETTERS (2006)
X-ray microtomographic characterisation of pore evolution during homogenisation and rolling of Al-6Mg
Y. M. Youssef et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
MicroCT (microtomography) quantification of microstructure related to macroscopic behaviour -: Part 1 -: Fatigue crack closure measured in situ in AA 2090 compact tension samples
K. I. Ignatiev et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Crack opening displacements during fatigue crack growth in Ti-SiC fibre metal matrix composites by X-ray tomography
P. J. Withers et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
MicroCT (microtomography) quantification of microstructure related to macroscopic behaviour - Part 2 - Damage in SiC-Al monofilament composites tested in monotonic tension and fatigue
T. M. Breunig et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Role of microstructure in the aging-related deterioration of the toughness of human cortical bone
R. K. Nalla et al.
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS (2006)
Three-dimensional visualisation of fatigue cracks in metals using high resolution synchrotron X-ray micro-tomography
J. Y. Buffiere et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
X-ray tomography observation of crack propagation in nuclear graphite
A. Hodgkins et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
X-ray microtomography studies of localised corrosion and transitions to stress corrosion cracking
B. J. Connolly et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
X-ray microtomographic observation of intergranular stress corrosion cracking in sensitised austenitic stainless steel
L. Babout et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Determination of the anisotropic radiative properties of a porous material by radiative distribution function identification (RDFI)
Barbar Zeghondy et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2006)
Time-lapsed investigation of three-dimensional failure and damage accumulation in trabecular bone using synchrotron light
P. J. Thurner et al.
BONE (2006)
Fracture, aging, and disease in bone
J. W. Ager et al.
JOURNAL OF MATERIALS RESEARCH (2006)
Quantitative 3D characterization of intermetallic phases in an Al-Mg industrial alloy by X-ray microtomography
E Maire et al.
SCRIPTA MATERIALIA (2006)
Image-based modeling of the response of experimental 3D microstructures to mechanical loading
A. C. Lewis et al.
SCRIPTA MATERIALIA (2006)
High resolution X-ray tomography of micromechanisms of fatiLyue crack closure
K. H. Khor et al.
SCRIPTA MATERIALIA (2006)
Energy-tunable transmission x-ray microscope for differential contrast imaging with near 60 nm resolution tomography
Gung-Chian Yin et al.
APPLIED PHYSICS LETTERS (2006)
Estimation of the effective properties of particle-reinforced metal-matrix composites from microtomographic reconstructions
A. Borbely et al.
ACTA MATERIALIA (2006)
Phase transformations in steel studied by 3DXRD microscopy
SE Offerman et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2006)
Fast X-ray tomography analysis of bubble growth and foam setting during breadmaking
P. Babin et al.
JOURNAL OF CEREAL SCIENCE (2006)
The principle of strain reconstruction tomography: Determination of quench strain distribution from diffraction measurements
AM Korsunsky et al.
ACTA MATERIALIA (2006)
Digital image correlation: from displacement measurement to identification of elastic properties - a review
F Hild et al.
STRAIN (2006)
Quantitative assessment of microstructure and its effects on compression behavior of aluminum foams via high-resolution synchrotron X-ray tomography
H Toda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Phase retrieval and differential phase-contrast imaging with low-brilliance X-ray sources
F Pfeiffer et al.
NATURE PHYSICS (2006)
Influence of relative density on the architecture and mechanical behaviour of a steel metallic wool
JP Masse et al.
SCRIPTA MATERIALIA (2006)
Simulation of the mechanical properties of an aluminum matrix composite using X-ray microtomography
IG Watson et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2006)
Mapping the evolution of density in 3D of thermally oxidised graphite for nuclear applications
L Babout et al.
SCRIPTA MATERIALIA (2006)
Deformation of steel powder compacts during sintering: Correlation between macroscopic measurement and in situ microtomography analysis
A Vagnon et al.
ACTA MATERIALIA (2006)
Particle movement during the deep penetration of a granular material studied by X-ray microtomography
SA McDonald et al.
SCRIPTA MATERIALIA (2006)
X-ray microtomographic characterisation of porosity and its influence on fatigue crack growth
P. Li et al.
ADVANCED ENGINEERING MATERIALS (2006)
3D grainmap generation with the algebraic reconstruction technique from 3DXRD data
E Knudsen
MATERIALS SCIENCE AND TECHNOLOGY (2005)
Simulation of the densification of real open-celled foam microstructures
AD Brydon et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2005)
X-ray computed microtomography of internal damage in fiber reinforced polymer matrix composites
PJ Schilling et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Mechanical properties of bread crumbs from tomography based Finite Element simulations
P Babin et al.
JOURNAL OF MATERIALS SCIENCE (2005)
Nucleation of recrystallization observed in situ in the bulk of a deformed metal
AW Larsen et al.
SCRIPTA MATERIALIA (2005)
X-ray phase imaging with a grating interferometer
T Weitkamp et al.
OPTICS EXPRESS (2005)
The effect of structural defects on the compressive behavior of closed-cell Al foam
I Jeon et al.
ACTA MATERIALIA (2005)
3D quantitative image analysis of open-cell nickel foams under tension and compression loading using X-ray microtomography
T Dillard et al.
PHILOSOPHICAL MAGAZINE (2005)
Soft X-ray microscopy at a spatial resolution better than 15nm
WL Chao et al.
NATURE (2005)
In-situ three-dimensional microstructural investigation of solidification of an Al-Cu alloy by ultrafast X-ray microtomography
O Ludwig et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2005)
Real-time observation of grain nucleation and growth during solidification of aluminium alloys
N Iqbal et al.
ACTA MATERIALIA (2005)
Simultaneous tomography and diffraction analysis of creep damage
A Pyzalla et al.
SCIENCE (2005)
Comparison between wire-mesh sensor and ultra-fast X-ray tomograph for an air-water flow in a vertical pipe
HM Prasser et al.
FLOW MEASUREMENT AND INSTRUMENTATION (2005)
Virtual materials design: Properties of cellular solids derived from 3D tomographic images
M Knackstedt et al.
ADVANCED ENGINEERING MATERIALS (2005)
Experimental ultra fast X-ray computed tomography with a linearly scanned electron beam source
U Hampel et al.
FLOW MEASUREMENT AND INSTRUMENTATION (2005)
Fast microtomography using high energy synchrotron radiation -: art. no. 043702
M Di Michiel et al.
REVIEW OF SCIENTIFIC INSTRUMENTS (2005)
Relationship between internal porosity and fracture strength of die-cast magnesium AM60B alloy
JP Weiler et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Permeability assessment by 3D interdendritic flow simulations on microtomography mappings of Al-Cu alloys
D Bernard et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
First direct 3D visualisation of microstructural evolutions during sintering through X-ray computed microtomoaraphy
D Bernard et al.
ACTA MATERIALIA (2005)
Investigation of the clustering behaviour of titanium diboride particles in aluminium
IG Watson et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
The effect of thermal oxidation on polycrystalline graphite studied by X-ray tomography
L Babout et al.
CARBON (2005)
A 3D measurement procedure for internal local crack driving forces via synchrotron X-ray microtomography
H Toda et al.
ACTA MATERIALIA (2004)
Bulk observation of metal powder sintering by X-ray synchrotron microtomography
O Lame et al.
ACTA MATERIALIA (2004)
Direct observation of subgrain evolution during recovery of cold-rolled aluminium
C Gundlach et al.
SCRIPTA MATERIALIA (2004)
In situ high resolution synchrotron x-ray tomography of fatigue crack closure micromechanisms
KH Khor et al.
JOURNAL OF PHYSICS-CONDENSED MATTER (2004)
Analysis of pore interconnectivity in bioactive glass foams using X-ray microtomography
RC Atwood et al.
SCRIPTA MATERIALIA (2004)
Lattice rotations of individual bulk grains Part II: correlation with initial orientation and model comparison
G Winther et al.
ACTA MATERIALIA (2004)
Structure and mechanical properties of AFS sandwiches studied by in-situ compression tests in X-ray microtomography
L Salvo et al.
ADVANCED ENGINEERING MATERIALS (2004)
Synchrotron x-ray microtomographic investigation of mineral concentrations at micrometre scale in sound and carious enamel
SEP Dowker et al.
CARIES RESEARCH (2004)
Damage initiation in model metallic materials:: X-ray tomography and modelling
L Babout et al.
ACTA MATERIALIA (2004)
Micron-resolution 3-D measurement of local orientations near a grain-boundary in plane-strained aluminum using X-ray microbeams
BC Larson et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2004)
HIGH RESOLUTION COMPUTED TOMOGRAPHY AND IMPLICATIONS FOR FATIGUE CRACK CLOSURE MODELLING
Guvenilir et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2003)
Non-destructive mapping of grains in three dimensions
X Fu et al.
SCRIPTA MATERIALIA (2003)
Soft 20-nm resolution x-ray microscopy demonstrated by use of multilayer test structures
WL Chao et al.
OPTICS LETTERS (2003)
Recrystallization kinetics of individual bulk grains in 90% cold-rolled aluminium
EM Lauridsen et al.
ACTA MATERIALIA (2003)
Assessment of the fatigue crack closure phenomenon in damage-tolerant aluminium alloy by in-situ high-resolution synchrotron X-ray microtomography
H Toda et al.
PHILOSOPHICAL MAGAZINE (2003)
3D-characterisation of microstructure evolution during annealing of a deformed aluminum single crystal
HF Poulsen et al.
ACTA MATERIALIA (2003)
Measurements of plastic displacement gradient components in three dimensions using marker particles and synchrotron X-ray absorption microtomography
SF Nielsen et al.
ACTA MATERIALIA (2003)
Measurement of the local velocity of the solid phase and the local solid hold-up in a three-phase flow by X-ray based particle tracking velocimetry (XPTV)
A Seeger et al.
CHEMICAL ENGINEERING SCIENCE (2003)
Microstructural analysis of alumina chromium composites by X-ray tomography and 3-D finite element simulation of thermal stresses
G Geandier et al.
SCRIPTA MATERIALIA (2003)
Study of the interaction of a short fatigue crack with grain boundaries in a cast Al alloy using X-ray microtomography
W Ludwig et al.
ACTA MATERIALIA (2003)
X-ray tomography applied to the characterization of cellular materials. Related finite element modeling problems
E Maire et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2003)
Crack blunting, crack bridging and resistance-curve fracture mechanics in dentin: effect of hydration
JJ Kruzic et al.
BIOMATERIALS (2003)
X-ray micro-tomography an attractive characterisation technique in materials science
L Salvo et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2003)
Microimaging and tomography with chemical speciation
C Rau et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2003)
Differential x-ray phase contrast imaging using a shearing interferometer
C David et al.
APPLIED PHYSICS LETTERS (2002)
Digital volume correlation including rotational degrees of freedom during minimization
TS Smith et al.
EXPERIMENTAL MECHANICS (2002)
Computation of linear elastic properties from microtomographic images: Methodology and agreement between theory and experiment
CH Arns et al.
GEOPHYSICS (2002)
Quantitative X-ray projection microscopy: phase-contrast and multi-spectral imaging
SC Mayo et al.
JOURNAL OF MICROSCOPY-OXFORD (2002)
Fatigue crack nuclei in austempered ductile cast iron
TJ Marrow et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2002)
In-situ deformation of an open-cell flexible polyurethane foam characterised by 3D computed microtomography
JA Elliott et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Simultaneous phase and amplitude extraction from a single defocused image of a homogeneous object
D Paganin et al.
JOURNAL OF MICROSCOPY (2002)
Three-dimensional X-ray structural microscopy with submicrometre resolution
BC Larson et al.
NATURE (2002)
Elastic properties of model random three-dimensional open-cell solids
AP Roberts et al.
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS (2002)
Three-dimensional maps of grain boundaries and the stress state of individual grains in polycrystals and powders
HF Poulsen et al.
JOURNAL OF APPLIED CRYSTALLOGRAPHY (2001)
Experimental study of porosity and its relation to fatigue mechanisms of model Al-Si7-Mg0.3 cast Al alloys
JY Buffière et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2001)
Characterization by X-ray computed tomography of decohesion, porosity growth and coalescence in model metal matrix composites
L Babout et al.
ACTA MATERIALIA (2001)
Elastic moduli of model random three-dimensional closed-cell cellular solids
AP Roberts et al.
ACTA MATERIALIA (2001)
Relations between X-ray tomography, density and mechanical properties in carbon-carbon composites
N Douarche et al.
CARBON (2001)
Intergranular and intragranular behavior of polycrystalline aggregates. Part 1: FE model
F Barbe et al.
INTERNATIONAL JOURNAL OF PLASTICITY (2001)
High-resolution lenses for sub-100 nm x-ray fluorescence microscopy
C David et al.
APPLIED PHYSICS LETTERS (2000)
Experimental characterisation of the localisation phenomenon inside a Vosges sandstone in a triaxial cell
P Bésuelle et al.
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES (2000)
Elastic properties of model porous ceramics
AP Roberts et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2000)
Pore and throat size distributions measured from synchrotron X-ray tomographic images of Fontainebleau sandstones
WB Lindquist et al.
JOURNAL OF GEOPHYSICAL RESEARCH-SOLID EARTH (2000)
Kinetics of individual grains during recrystallization
EM Lauridsen et al.
SCRIPTA MATERIALIA (2000)
Signatures of granular microstructure in dense shear flows
DM Mueth et al.
NATURE (2000)
Soft X-ray spectroscopy from image sequences with sub-100 nm spatial resolution
C Jacobsen et al.
JOURNAL OF MICROSCOPY-OXFORD (2000)
Characterisation by X-ray micro-tomography of cavity coalescence during superplastic deformation
CF Martin et al.
SCRIPTA MATERIALIA (2000)
Efficient correction for CT image artifacts caused by objects extending outside the scan field of view
B Ohnesorge et al.
MEDICAL PHYSICS (2000)
分享论文
