相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior
Erhard Brandl et al.
MATERIALS & DESIGN (2012)
Osteoinduction of porous Ti implants with a channel structure fabricated by selective laser melting
A. Fukuda et al.
ACTA BIOMATERIALIA (2011)
Microstructural evolution and mechanical, and corrosion property evaluation of Cu-30Ni alloy formed by Direct Metal Deposition process
S. Bhattacharya et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2011)
Selective laser melting of aluminium components
Eleftherios Louvis et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2011)
Microstructural evolution of AISI 4340 steel during Direct Metal Deposition process
S. Bhattacharya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2011)
Selective Laser Melting of in-situ TiC/Ti5Si3 composites with novel reinforcement architecture and elevated performance
Dongdong Gu et al.
SURFACE & COATINGS TECHNOLOGY (2011)
Porous tantalum structures for bone implants: Fabrication, mechanical and in vitro biological properties
Vamsi Krishna Balla et al.
ACTA BIOMATERIALIA (2010)
Influence of porosity on mechanical properties and in vivo response of Ti6Al4V implants
Amit Bandyopadhyay et al.
ACTA BIOMATERIALIA (2010)
Microporosity effects on cyclic plasticity and fatigue of LENS (TM)-processed steel
Y. Xue et al.
ACTA MATERIALIA (2010)
Mechanics and energy analysis on molten pool spreading during laser solid forming
Jun Yu et al.
APPLIED SURFACE SCIENCE (2010)
Selective Laser Melting (SLM) of pure gold
Mushtaq Khan et al.
GOLD BULLETIN (2010)
Process analysis for laser solid forming of thin-wall structure
Hua Tan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2010)
High temperature mechanical properties of a laser melting deposited TiC/TA15 titanium matrix composite
D. Liu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2010)
The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures
S. Tsopanos et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2010)
Selective Laser Melting of thin wall parts using pulse shaping
K. A. Mumtaz et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2010)
Temperature and composition profile during double-track laser cladding of H13 tool steel
X. He et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2010)
Influence of size and volume fraction of SiC particulates on properties of ex situ reinforced Al-4.5Cu-3Mg metal matrix composite prepared by direct metal laser sintering process
Subrata Kumar Ghosh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Microstructure and mechanical properties of laser melting deposited 1Cr12Ni2WMoVNb steel
Y. D. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Microstructure and mechanical properties of rapid directionally solidified Ni-base superalloy Rene'41 by laser melting deposition manufacturing
J. Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Effect of annealing temperature on the notch impact toughness of a laser melting deposited titanium alloy Ti-4Al-1.5Mn
X. J. Tian et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by Selective Laser Melting
Dongdong Gu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2010)
The Influence of Ni-Coated TiC on Laser-Deposited IN625 Metal Matrix Composites
Baolong Zheng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2010)
(Ti,W)C-Ni cermets by laser engineered net shaping
Y. Xiong et al.
POWDER METALLURGY (2010)
Laser surface cladding: the state of the art and challenges
M. Zhong et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2010)
Blending of iron and silicon carbide powders for producing metal matrix composites by laser sintering process
Cheekur Krishnamurthy Srinivasa et al.
RAPID PROTOTYPING JOURNAL (2010)
Ductility of a Ti-6Al-4V alloy produced by selective laser melting of prealloyed powders
Luca Facchini et al.
RAPID PROTOTYPING JOURNAL (2010)
Laser processing of SiC-particle-reinforced coating on titanium
Mitun Das et al.
SCRIPTA MATERIALIA (2010)
Individualized production by means of high power Selective Laser Melting
H. Schleifenbaum et al.
CIRP JOURNAL OF MANUFACTURING SCIENCE AND TECHNOLOGY (2010)
Fabrication of compositionally and structurally graded Ti-TiO2 structures using laser engineered net shaping (LENS)
Vamsi Krishna Balla et al.
ACTA BIOMATERIALIA (2009)
Crystallographic texture and microstructure of pulsed diode laser-deposited Waspaloy
R. J. Moat et al.
ACTA MATERIALIA (2009)
A pragmatic model for selective laser melting with evaporation
F. Verhaeghe et al.
ACTA MATERIALIA (2009)
Fabrication of Fe-Cr-Al Oxide Dispersion Strengthened PM2000 Alloy Using Selective Laser Melting
John C. Walker et al.
ADVANCED ENGINEERING MATERIALS (2009)
Manufacturing of fine-structured 3D porous filter elements by selective laser melting
I. Yadroitsev et al.
APPLIED SURFACE SCIENCE (2009)
Microstructure and dry sliding wear resistance of CoTi intermetallic alloy
Y. Xue et al.
INTERMETALLICS (2009)
Microstructure and wear resistance of WC-Co by three consolidation processing techniques
J. A. Picas et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2009)
Microstructure evolution in laser solid forming of Ti-50 wt% Ni alloy
Xiaojing Xu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Effects of processing parameters on consolidation and microstructure of W-Cu components by DMLS
Dongdong Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Phase Evolution in Laser Rapid Forming of Compositionally Graded Ti-Ni Alloys
X. Lin et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2009)
Experimental and Numerical Study of the LENS Rapid Fabrication Process
Liang Wang et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2009)
Manufacturing of WC-Co moulds using SLS machine
S. Kumar
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
The influence of working distance on laser deposited WC-Co
Yuhong Xiong et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Selective laser melting of a stainless steel and hydroxyapatite composite for load-bearing implant development
L. Hao et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
Microstructures and properties of direct laser sintered tungsten carbide (WC) particle reinforced Cu matrix composites with RE-Si-Fe addition: A comparative study
Dongdong Gu et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Microstructural characteristics and formation mechanism of direct laser-sintered Cu-based alloys reinforced with Ni particles
Dongdong Gu et al.
MATERIALS & DESIGN (2009)
Balling phenomena in direct laser sintering of stainless steel powder: Metallurgical mechanisms and control methods
Dongdong Gu et al.
MATERIALS & DESIGN (2009)
Potential of Laser Engineered Net Shaping (LENS) Technology
I. Palcic et al.
MATERIALS AND MANUFACTURING PROCESSES (2009)
Fabrication of ZrB2-Zr cermet using laser sintering technique
Chen-Nan Sun et al.
MATERIALS LETTERS (2009)
Growth morphologies and mechanisms of TiC grains during Selective Laser Melting of Ti-Al-C composite powder
Dongdong Gu et al.
MATERIALS LETTERS (2009)
Preparation of TiN-Ti5Si3 in-situ composites by Selective Laser Melting
Dongdong Gu et al.
MATERIALS LETTERS (2009)
Studies on laser sintering of mechanically alloyed Al50Ti40Si10 composite
S. S. Singh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
The effect of hot isostatic pressing on crack healing, microstructure, mechanical properties of Rene88DT superalloy prepared by laser solid forming
Xiaoming Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Laser aided direct metal deposition of Inconel 625 superalloy: Microstructural evolution and thermal stability
G. P. Dinda et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2009)
Processing and Behavior of Fe-Based Metallic Glass Components via Laser-Engineered Net Shaping
B. Zheng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2009)
Composition control for laser solid forming from blended elemental powders
Fengying Zhang et al.
OPTICS AND LASER TECHNOLOGY (2009)
Top surface and side roughness of Inconel 625 parts processed using selective laser melting
Kamran Mumtaz et al.
RAPID PROTOTYPING JOURNAL (2009)
Abrasive wear behaviour of laser sintered iron-SiC composites
C. S. Ramesh et al.
WEAR (2009)
Wear performance of SLS/SLM materials
Sanjay Kumar et al.
ADVANCED ENGINEERING MATERIALS (2008)
Direct laser sintered WC-10Co/Cu nanocomposites
Dongdong Gu et al.
APPLIED SURFACE SCIENCE (2008)
Dry sliding wear property of a laser melting/deposited Ti2Ni/TiNi intermetallic alloy
F. Gao et al.
INTERMETALLICS (2008)
Engineered porous metals for implants
B. Vamsi Krishna et al.
JOM (2008)
Microstructure and properties of Ti-Co-Si ternary intermetallic alloys
Y. Xue et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Microstructure and corrosion properties of laser-melted deposited Ti2Ni3Si/NiTi intermetallic alloy
L. X. Dong et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2008)
Numerical simulation of direct metal laser sintering of single-component powder on top of sintered layers
Bin Xiao et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2008)
Direct laser fabrication of Ti6Al4V/TiB
F. Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
High density selective laser melting of Waspaloy (R)
Kamran Aamir Mumtaz et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
The role of La2O3 in direct laser sintering of submicrometre WC-Cop/Cu MMCs
Dongdong Gu et al.
JOURNAL OF PHYSICS D-APPLIED PHYSICS (2008)
Effect of TiNi in dry sliding wear of laser melt deposited Ti2Ni/TiNi alloys
F. Gao et al.
MATERIALS CHARACTERIZATION (2008)
Residual stresses in LENS-deposited AISI 410 stainless steel plates
Liang Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Optimization of the LENS® process for steady molten pool size
L. Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Fabrication of WC-Co cermets by laser engineered net shaping
Yuhong Xiong et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Study on microstructure and mechanical properties of laser rapid forming Inconel 718
Xiaoming Zhao et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2008)
Microstructure and properties of laser-deposited Ti6Al4V metal matrix composites using Ni-coated powder
B. Zheng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Residual Stress Measurement of Laser-Engineered Net Shaping AISI 410 Thin Plates Using Neutron Diffraction
P. Pratt et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Fabrication of Ti-6Al-4V Scaffolds by Direct Metal Deposition
G. P. Dinda et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Thermal behavior and microstructural evolution during laser deposition with laser-engineered net shaping: Part I. Numerical calculations
B. Zheng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Thermal behavior and microstructure evolution during laser deposition with laser-engineered net shaping: Part II. Experimental investigation and discussion
B. Zheng et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2008)
Effect of SiC particles on the laser sintering of Al-7Si-0.3Mg alloy
A. Simchi et al.
SCRIPTA MATERIALIA (2008)
Strategy of manufacturing components with designed internal structure by selective laser melting of metallic powder
I. Yadroitsev et al.
APPLIED SURFACE SCIENCE (2007)
Heat transfer modelling and stability analysis of selective laser melting
A. V. Gusarov et al.
APPLIED SURFACE SCIENCE (2007)
Processing and biocompatibility evaluation of laser processed porous titanium
Weichang Xue et al.
ACTA BIOMATERIALIA (2007)
Low stiffness porous Ti structures for load-bearing implants
B. Vamsi Krishna et al.
ACTA BIOMATERIALIA (2007)
Microstructure and mechanical properties of laser melting deposited γ-TiAl intermetallic alloys
H. P. Qu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Novel nanoparticle-reinforced metal matrix composites with enhanced mechanical properties
Sie Chin Tjong
ADVANCED ENGINEERING MATERIALS (2007)
Parametric analysis of the selective laser melting process
I. Yadroitsev et al.
APPLIED SURFACE SCIENCE (2007)
Metallurgical mechanisms in direct laser sintering of Cu-CuSn-CuP mixed powder
Dongdong Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Investigating laser rapid manufacturing for Inconel-625 components
C. P. Paul et al.
OPTICS AND LASER TECHNOLOGY (2007)
Balling phenomena during direct laser sintering of multi-component Cu-based metal powder
Dongdong Gu et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2007)
Transport phenomena during direct metal deposition
X. He et al.
JOURNAL OF APPLIED PHYSICS (2007)
Process maps for predicting residual stress and melt pool size in the laser-based fabrication of thin-walled structures
Aditad Vasinonta et al.
JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME (2007)
Solidification behavior and the evolution of phase in laser rapid forming of graded Ti6Al4V-Rene88DT alloy
X. Lin et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2007)
Effect of bronze infiltration into laser sintered metallic parts
S. Kumar et al.
MATERIALS & DESIGN (2007)
Selective laser melting of biocompatible metals for rapid manufacturing of medical parts
Ben Vandenbroucke et al.
RAPID PROTOTYPING JOURNAL (2007)
Microstructure and dry sliding wear resistance of Moss-toughened Mo2N3Si metal silicide alloys
Y. L. Gui et al.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (2007)
Consolidation phenomena in laser and powder-bed based layered manufacturing
J. -P. Kruth et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2007)
A review of laser fabrication of metallic engineering components and of materials
X. Wu
MATERIALS SCIENCE AND TECHNOLOGY (2007)
Four-point bending fatigue behaviour of an iron-based laser sintered material
Y. Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2006)
Effects of processing parameters on direct laser sintering of multicomponent Cu based metal powder
D. D. Gu et al.
MATERIALS SCIENCE AND TECHNOLOGY (2006)
Influence of phosphorus element on direct laser sintering of multicomponent Cu-based metal powder
D. D. Gu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2006)
Analysis of thermal phenomena in LENS™ deposition
Liang Wang et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Structural, mechanical and in vitro characterization of individually structured Ti-6Al-4V produced by direct laser forming
DA Hollander et al.
BIOMATERIALS (2006)
Rapid manufacturing of metal components by laser forming
Edson Costa Santos et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
Microstructural characterization and wear behavior of (Fe,Ni)-TiC MMC prepared by DMLS
A. Gaard et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2006)
Direct laser sintering of metal powders: Mechanism, kinetics and microstructural features
A. Simchi
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Numerical simulation of heat transfer and fluid flow in coaxial laser cladding process for direct metal deposition
Huan Qi et al.
JOURNAL OF APPLIED PHYSICS (2006)
Properties of titanium dental implant models made by laser processing
T. Laoui et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2006)
A wear resistant ductile metal-toughened Cr13Ni5Si2 ternary metal silicide alloy
YL Fang et al.
INTERMETALLICS (2006)
Microstructure and phase evolution in laser rapid forming of a functionally graded Ti-Rene88DT alloy
X Lin et al.
ACTA MATERIALIA (2006)
Characterization of an iron-based laser sintered material
Y Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2006)
Study on shrinkage behaviour of direct laser sintering metallic powder
H. H. Zhu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2006)
Residual stresses in selective laser sintering and selective laser melting
Peter Mercelis et al.
RAPID PROTOTYPING JOURNAL (2006)
Fundamentals of selective laser melting of alloyed steel powders
M. Rombouts et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2006)
Effect of direct laser re-melting processing parameters and scanning strategies on the densification of tool steels
JW Xie et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Nanoscale TiB precipitates in laser deposited Ti-matrix composites
R Banerjee et al.
SCRIPTA MATERIALIA (2005)
Finite element analysis of the effect of volume shrinkage during laser densification
K Dal et al.
ACTA MATERIALIA (2005)
Effect of sintering atmosphere and carbon content on the densification and microstructure of laser-sintered M2 high-speed steel powder
H Asgharzadeh et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Boundary liquation and interface cracking characterization in laser deposition of Inconel 738 on directionally solidified Ni-based superalloy
ML Zhong et al.
SCRIPTA MATERIALIA (2005)
Modelling of radiation transfer in metallic powders at laser treatment
AV Gusarov et al.
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER (2005)
Residual stresses in LENS® components using neutron diffraction and contour method
P Rangaswamy et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Influence of position and laser power on thermal history and microstructure of direct laser fabricated Ti-6Al-4V samples
L Qian et al.
MATERIALS SCIENCE AND TECHNOLOGY (2005)
Microstructure and high-temperature sliding wear property of COss/CO3MO2Si metal silicide alloys
Y Liu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
Optical and conductive properties of AlSi-alloy/SiCp composites:: application in modelling CO2 laser processing of composites
A Grabowski et al.
OPTICS AND LASERS IN ENGINEERING (2005)
Binding mechanisms in selective laser sintering and selective laser melting
JP Kruth et al.
RAPID PROTOTYPING JOURNAL (2005)
Study of laser-sinterability of ferro-based powders
JP Kruth et al.
RAPID PROTOTYPING JOURNAL (2005)
Highly precise pulsed selective laser sintering of metallic powders
P Fischer et al.
LASER PHYSICS LETTERS (2005)
Microstructure of near-infrared pulsed laser sintered titanium samples
P Fischer et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2004)
Influence of binder's liquid volume fraction on direct laser sintering of metallic powder
HH Zhu et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Microstructures of laser-deposited Ti-6Al-4V
XH Wu et al.
MATERIALS & DESIGN (2004)
Microstructure and properties of a laser fabricated burn-resistant Ti alloy
X Wu et al.
MATERIALS & DESIGN (2004)
The behaviour of water- and gas-atomised tool steel powders in coaxial laser freeform fabrication
AJ Pinkerton et al.
THIN SOLID FILMS (2004)
Density analysis of direct metal laser re-melted 316L stainless steel cubic primitives
R Morgan et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Thermal and mechanical finite element modeling of laser forming from metal and ceramic powders
K Dai et al.
ACTA MATERIALIA (2004)
Laser synthesizing NiAl intermetallic and TiC reinforced NiAl intermetallic matrix composite
ML Zhong et al.
JOURNAL OF LASER APPLICATIONS (2004)
Microstructure and mechanical properties of pure titanium models fabricated by selective laser melting
EC Santos et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2004)
Densification and microstructural evaluation during laser sintering of M2 high speed steel powder
A Simchi et al.
MATERIALS SCIENCE AND TECHNOLOGY (2004)
Comparison of microstructural evolution in laser-deposited and arc-melted in-situ Ti-TiB composites
R Banerjee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2004)
Selective laser melting of iron-based powder
JP Kruth et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Balling processes during selective laser treatment of powders
NK Tolochko et al.
RAPID PROTOTYPING JOURNAL (2004)
Direct laser sintering of iron-graphite powder mixture
A Simchi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2004)
Direct laser remelting of iron with addition of boron
XC Chen et al.
MATERIALS SCIENCE AND TECHNOLOGY (2004)
Residual stress within metallic model made by selective laser melting process
M Shiomi et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
Mapping and modelling single scan track formation in direct metal selective laser melting
THC Childs et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2004)
The influences of processing parameters on forming characterizations during laser rapid forming
YM Li et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Effects of laser sintering processing parameters on the microstructure and densification of iron powder
A Simchi et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Physical aspects of process control in selective laser sintering of metals
S Das
ADVANCED ENGINEERING MATERIALS (2003)
Development and characterisation of direct laser sintering Cu-based metal powder
HH Zhu et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Composition control in the direct laser-deposition process
RR Unocic et al.
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE (2003)
A method for the design and fabrication of heterogeneous objects
KH Shin et al.
MATERIALS & DESIGN (2003)
Laser deposition of compositionally graded titanium-vanadium and titanium-molybdenum alloys
PC Collins et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2003)
Microstructural evolution in laser deposited compositionally graded α/β titanium-vanadium alloys
R Banerjee et al.
ACTA MATERIALIA (2003)
Solid freeform fabrication of three-dimensional scaffolds for engineering replacement tissues and organs
KF Leong et al.
BIOMATERIALS (2003)
An experimental design approach to selective laser sintering of low carbon steel
AN Chatterjee et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Sintering of commercially pure titanium powder with a Nd:YAG laser source
P Fischer et al.
ACTA MATERIALIA (2003)
The effect of laser pulse width on multiple-layer 316L steel clad microstructure and surface finish
AJ Pinkerton et al.
APPLIED SURFACE SCIENCE (2003)
Rapid tooling: selective laser sintering injection tooling
D King et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Fabrication and creep properties of superalloy-zirconia composites
RK Oruganti et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
In-situ reactive processing of nickel aluminides by laser-engineered net shaping
WP Liu et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2003)
On the development of direct metal laser sintering for rapid tooling
A Simchi et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Mechanisms of selective laser sintering and heat transfer in Ti powder
NK Tolochko et al.
RAPID PROTOTYPING JOURNAL (2003)
The production of copper parts using DMLR
SR Pogson et al.
RAPID PROTOTYPING JOURNAL (2003)
Lasers and materials in selective laser sintering
JP Kruth et al.
ASSEMBLY AUTOMATION (2003)
Formation of Fe-Cu metal parts using direct laser sintering
HH Zhu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE (2003)
Rapid manufacturing and rapid tooling with layer manufacturing (LM) technologies, state of the art and future perspectives
GN Levy et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)
New ferro powder for selective laser sintering of dense parts
JP Kruth et al.
CIRP ANNALS-MANUFACTURING TECHNOLOGY (2003)
High density net shape components by direct laser re-melting of single-phase powders
RH Morgan et al.
JOURNAL OF MATERIALS SCIENCE (2002)
Phase evolution in laser-deposited titanium-chromium alloys
R Banerjee et al.
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE (2002)
Direct selective laser sintering of hard metal powders: Experimental study and simulation
XC Wang et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2002)
Investigation into steering wheel nibble
U Neureder
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING (2002)
Direct laser deposition of alloys from elemental powder blends
KI Schwendner et al.
SCRIPTA MATERIALIA (2001)
Solidification in direct metal deposition by LENS processing
W Hofmeister et al.
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2001)
Direct metal laser sintering for rapid tooling: processing and characterisation of EOS parts
MW Khaing et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2001)
A process planning method for improving build performance in stereolithography
AP West et al.
COMPUTER-AIDED DESIGN (2001)
Rapid tooling applications of the selective laser sintering process
SS Dimov et al.
ASSEMBLY AUTOMATION (2001)
A crystal ball view of direct-metal deposition
J Mazumder
JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY (2000)
Closed loop direct metal deposition: art to part
J Mazumder et al.
OPTICS AND LASERS IN ENGINEERING (2000)
Microstructural and mechanical characteristics of in situ metal matrix composites
SC Tjong et al.
MATERIALS SCIENCE & ENGINEERING R-REPORTS (2000)
Practical considerations and capabilities for laser assisted direct metal deposition
GK Lewis et al.
MATERIALS & DESIGN (2000)
A review of rapid prototyping (RP) techniques in the medical and biomedical sector
PA Webb
JOURNAL OF MEDICAL ENGINEERING & TECHNOLOGY (2000)
Role of preheating and specific energy input on the evolution of microstructure and wear properties of laser clad Fe-Cr-C-W alloys
J Choi et al.
JOURNAL OF MATERIALS SCIENCE (2000)
Selective laser sintering of gas atomized M2 high speed steel powder
HJ Niu et al.
JOURNAL OF MATERIALS SCIENCE (2000)
分享论文
