相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Analysis of triple phase contact in Ni-YSZ microstructures using non-destructive X-ray tomography with synchrotron radiation
P. R. Shearing et al.
ELECTROCHEMISTRY COMMUNICATIONS (2010)
Quantification of SOFC anode microstructure based on dual beam FIB-SEM technique
Hiroshi Iwai et al.
JOURNAL OF POWER SOURCES (2010)
A review of recent progress in coatings, surface modifications and alloy developments for solid oxide fuel cell ferritic stainless steel interconnects
Nima Shaigan et al.
JOURNAL OF POWER SOURCES (2010)
Microstructural analysis of a solid oxide fuel cell anode using focused ion beam techniques coupled with electrochemical simulation
P. R. Shearing et al.
JOURNAL OF POWER SOURCES (2010)
Effect of composition of (La0.8Sr0.2MnO3-Y2O3-stabilized ZrO2) cathodes: Correlating three-dimensional microstructure and polarization resistance
James R. Wilson et al.
JOURNAL OF POWER SOURCES (2010)
Numerical Assessment of SOFC Anode Polarization Based on Three-Dimensional Model Microstructure Reconstructed from FIB-SEM Images
Naoki Shikazono et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2010)
X-ray nano computerised tomography of SOFC electrodes using a focused ion beam sample-preparation technique
P. R. Shearing et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2010)
Highly conductive low nickel content nano-composite dense cermets from nano-powders made via a continuous hydrothermal synthesis route
Xiaole Weng et al.
SOLID STATE IONICS (2010)
A framework for automatic segmentation in three dimensions of microstructural tomography data
P. S. Jorgensen et al.
ULTRAMICROSCOPY (2010)
Investigating the microstructure and catalytic properties of Ni/YSZ cermets as anodes for SOFC applications
Nielson F. P. Ribeiro et al.
APPLIED CATALYSIS A-GENERAL (2009)
3D reconstruction of SOFC anodes using a focused ion beam lift-out technique
P. R. Shearing et al.
CHEMICAL ENGINEERING SCIENCE (2009)
Activation and Ripening of Impregnated Manganese Containing Perovskite SOFC Electrodes under Redox Cycling
G. Corre et al.
CHEMISTRY OF MATERIALS (2009)
Quantitative three-dimensional microstructure of a solid oxide fuel cell cathode
James R. Wilson et al.
ELECTROCHEMISTRY COMMUNICATIONS (2009)
Fuel cells for micro-combined heat and power generation
Adam Hawkes et al.
ENERGY & ENVIRONMENTAL SCIENCE (2009)
Nickel-Zirconia Anode Degradation and Triple Phase Boundary Quantification from Microstructural Analysis
A. Faes et al.
FUEL CELLS (2009)
Combined EBSD/EDS tomography in a dual-beam FIB/FEG-SEM
G. D. West et al.
JOURNAL OF MICROSCOPY-OXFORD (2009)
Unbiased characterization of three-phase microstructure of porous lanthanum doped strontium manganite/yttria-stabilized zirconia composite cathodes for solid oxide fuel cells using atomic force microscopy and stereology
S. Zhang et al.
JOURNAL OF POWER SOURCES (2009)
Microstructure and polarization characteristics of anode supported tubular solid oxide fuel cell with co-precipitated and mechanically mixed Ni-YSZ anodes
Naoki Shikazono et al.
JOURNAL OF POWER SOURCES (2009)
Percolation theory to predict effective properties of solid oxide fuel-cell composite electrodes
Daifen Chen et al.
JOURNAL OF POWER SOURCES (2009)
Computation of TPB length, surface area and pore size from numerical reconstruction of composite solid oxide fuel cell electrodes
Ben Kenney et al.
JOURNAL OF POWER SOURCES (2009)
Development and Characterization of Porous Composites for Solid Oxide Fuel Cell Anode Conduction Layers Using Ceramic-Filled Highly Porous Ni Foam
Stephen F. Corbin et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Thermodynamics and Kinetics of the Interaction of Carbon and Sulfur with Solid Oxide fuel Cell Anodes
Gregory J. Offer et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2009)
Dimensional Behavior of Ni-YSZ Composites during Redox Cycling
M. Pihlatie et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2009)
Synthesis and characterisation of macroporous Yttria Stabilised Zirconia (YSZ) using polystyrene spheres as templates
Anna Lashtabeg et al.
MICROPOROUS AND MESOPOROUS MATERIALS (2009)
Three-Dimensional Analysis of Solid Oxide Fuel Cell Ni-YSZ Anode Interconnectivity
James R. Wilson et al.
MICROSCOPY AND MICROANALYSIS (2009)
Atom probe tomography
M. K. Miller et al.
MATERIALS CHARACTERIZATION (2009)
Microstructure and performance of novel Ni anode for hollow fibre solid oxide fuel cells (vol 180, pg 800, 2009)
Francesco Dal Grande et al.
SOLID STATE IONICS (2009)
The influence of pore and Ni morphology on the electrical conductivity of porous Ni/YSZ composite anodes for use in solid oxide fuel cell applications
Ryan M. C. Clemmer et al.
SOLID STATE IONICS (2009)
Redox stability of SOFC: Thermal analysis of Ni-YSZ composites
M. Pihlatie et al.
SOLID STATE IONICS (2009)
Characterization of NiO-yttria stabilised zirconia (YSZ) hollow fibres for use as SOFC anodes
N. Droushiotis et al.
SOLID STATE IONICS (2009)
Evaluation of the relationship between cathode microstructure and electrochemical behavior for SOFCs
J. R. Smith et al.
SOLID STATE IONICS (2009)
Nanoscale chemical analysis and imaging of solid oxide cells
Anne Hauch et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)
Solid oxide fuel cell Ni-YSZ anodes: Effect of composition on microstructure and performance
James R. Wilson et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2008)
Microstructural Modeling of Solid Oxide Fuel Cell Anodes
Joshua Golbert et al.
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH (2008)
Geometrical modeling of microstructure of solid oxide fuel cell composite electrodes
Abbaspour Ali et al.
JOURNAL OF POWER SOURCES (2008)
Micro modeling of solid oxide fuel cell anode based on stochastic reconstruction
Yoshinori Suzue et al.
JOURNAL OF POWER SOURCES (2008)
Changes in physical and mechanical properties of SOFCNi-YSZ composites caused by redox cycling
D. Sarantaridis et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Nondestructive reconstruction and analysis of SOFC anodes using x-ray computed tomography at sub-50 nm resolution
John R. Izzo et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2008)
Sub-micron resolution CT for failure analysis and process development
M. Feser et al.
MEASUREMENT SCIENCE AND TECHNOLOGY (2008)
Microstructural characterization of SOFCNi-YSZ anode composites by low-voltage scanning electron microscopy
K. Thyden et al.
SOLID STATE IONICS (2008)
Fabrication of functionally graded SOFC by APS
Y. Z. Yang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2007)
Solution precursor plasma spray of nickel-yittia stabilized zirconia anodes for solid oxide fuel cell application
Y. Wang et al.
JOURNAL OF THERMAL SPRAY TECHNOLOGY (2007)
Automated three-dimensional X-ray analysis using a dual-beam FIB
Miroslava Schaffer et al.
ULTRAMICROSCOPY (2007)
Redox cycling of Ni-based solid oxide fuel cell anodes: A review
D. Sarantaridis et al.
FUEL CELLS (2007)
Three-dimensional microstructural characterization using focused ion beam tomography
Michael D. Uchic et al.
MRS BULLETIN (2007)
Ni-YSZ gradient anodes for anode-supported SOFCs
Jiangrong Kong et al.
JOURNAL OF POWER SOURCES (2007)
Design and fabrication of lightweight, submillimeter tubular solid oxide fuel cells
Toshio Suzuki et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2007)
Three-dimensional reconstruction of porous LSCF cathodes
D. Gostovic et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2007)
Enhancing the redox tolerance of anode-supported SOFC by microstructural modification
D. Waldbillig et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2007)
Microstructural effects on the electrical and mechanical properties of Ni-YSZ cermet for SOFC anode
Ji Haeng Yu et al.
JOURNAL OF POWER SOURCES (2007)
Nano-composite materials for high-performance and durability of solid oxide fuel cells
Sun-Dong Kim et al.
JOURNAL OF POWER SOURCES (2006)
Influences of starting particulate materials on microstructural evolution and electrochemical activity of LSM-YSZ composite cathode for SOFC
Hwa Seob Song et al.
JOURNAL OF ELECTROCERAMICS (2006)
A novel approach to study the structure versus performance relationship of SOFC electrodes
Ali Abbaspour et al.
JOURNAL OF POWER SOURCES (2006)
Three-dimensional reconstruction of a solid-oxide fuel-cell anode
James R. Wilson et al.
NATURE MATERIALS (2006)
Performance and durability of Ni-coated YSZ anodes for intermediate temperature solid oxide fuel cells
Sun-Dong Kim et al.
SOLID STATE IONICS (2006)
Three-dimensional materials science
EA Holm et al.
SCRIPTA MATERIALIA (2006)
Engineering porous materials for fuel cell applications
NP Brandon et al.
PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES (2006)
In situ observations of microstructural changes in SOFC anodes during redox cycling
T. Klemenso et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2006)
Progress in solid oxide fuel cell materials
K Kendall
INTERNATIONAL MATERIALS REVIEWS (2005)
Electrochemical and microstructural characterization of the redox tolerance of solid oxide fuel cell anodes
D Waldbillig et al.
JOURNAL OF POWER SOURCES (2005)
Thermal analysis of the cyclic reduction and oxidation behaviour of SOFC anodes
D Waldbillig et al.
SOLID STATE IONICS (2005)
Modelling of a SOFC graded cathode
J Deseure et al.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY (2005)
A review of anode materials development in solid oxide fuel cells
SP Jiang et al.
JOURNAL OF MATERIALS SCIENCE (2004)
Mechanical properties of tape cast nickel-based anode materials for solid oxide fuel cells before and after reduction in hydrogen
M Radovic et al.
ACTA MATERIALIA (2004)
Advanced anodes for high-temperature fuel cells
A Atkinson et al.
NATURE MATERIALS (2004)
Influence of porous composite microstructure on the processing and properties of solid oxide fuel cell anodes
RMC Clemmer et al.
SOLID STATE IONICS (2004)
Sintering behavior of Ni/Y2O3-ZrO2 cermet electrodes of solid oxide fuel cells
SP Jiang
JOURNAL OF MATERIALS SCIENCE (2003)
Effects of impurities on microstructure in Ni/YSZ-YSZ half-cells for SOFC
YL Liu et al.
SOLID STATE IONICS (2003)
Solid oxide fuel cells
RM Ormerod
CHEMICAL SOCIETY REVIEWS (2003)
Progress in understanding SOFC electrodes
M Mogensen et al.
SOLID STATE IONICS (2002)
Quantitative analysis of microstructure and its related electrical property of SOFC anode, Ni-YSZ cermet
JH Lee et al.
SOLID STATE IONICS (2002)
The electrochemistry of Ni pattern anodes used as solid oxide fuel cell model electrodes
A Bieberle et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2001)
Material science and engineering: The enabling technology for the commercialisation of fuel cell systems
BCH Steele
JOURNAL OF MATERIALS SCIENCE (2001)
Effect of sintering temperature on microstructure and performance of LSM-YSZ composite cathodes
MJ Jorgensen et al.
SOLID STATE IONICS (2001)
Reaction mechanism of Ni pattern anodes for solid oxide fuel cells
A Bieberle et al.
SOLID STATE IONICS (2000)
Limitations of charge-transfer models for mixed-conducting oxygen electrodes
SB Adler
SOLID STATE IONICS (2000)
Simulations of composite electrodes in fuel cells
S Sunde
JOURNAL OF ELECTROCERAMICS (2000)
Nickel coarsening in annealed Ni/8YSZ anode substrates for solid oxide fuel cells -: In memoriam to Professor H.!Tagawa
D Simwonis et al.
SOLID STATE IONICS (2000)
Properties of Ni/YSZ cermet as anode for SOFC
H Koide et al.
SOLID STATE IONICS (2000)
Structure/performance relations for Ni/yttria-stabilized zirconia anodes for solid oxide fuel cells
M Brown et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2000)
Preparation of Ni-YSZ composite materials for solid oxide fuel cell anodes by the gel-precipitation method
M Marinsek et al.
JOURNAL OF POWER SOURCES (2000)
分享论文
