相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Click Chemistry in Tailor-Made Polymethacrylates Bearing Reactive Furfuryl Functionality: A New Class of Self-Healing Polymeric Material
A. Amalin Kavitha et al.
ACS APPLIED MATERIALS & INTERFACES (2009)
Self-Healing Colloidal Crystals
Ashlee St. John Iyer et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2009)
Modeling the process-induced dimensional variations of general curved composite components and assemblies
Chensong Dong
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Representativity of the singular stress state in the failure of adhesively bonded joints between metals and composites
A. Barroso et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Rheokinetic evaluation of self-healing agents polymerized by Grubbs catalyst embedded in various thermosetting systems
Xing Liu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Healing behavior of a matrix crack on a carbon fiber/mendomer composite
Jong Se Park et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Fracture characterization of interfacial cracks with frictional contact of the crack surfaces to predict failures in adhesive-bonded joints
Won-Seock Kim et al.
ENGINEERING FRACTURE MECHANICS (2009)
The way to autonomic self-healing polymers and composites
A. Pegoretti
EXPRESS POLYMER LETTERS (2009)
The mechanical behavior of adhesively bonded tailor-made blanks
Amir Abbas Zadpoor et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2009)
Experimental and numerical analysis of a beam made of adhesively bonded tailor-made blanks
Alessandro Monaco et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Tensile properties of Cr inserted amorphous Co85Zr9Nb6 films deposited on polymer substrate
F. Zeng et al.
JOURNAL OF ALLOYS AND COMPOUNDS (2009)
Improving Interfacial Adhesion Between Thermoplastic Polyurethane and Copper Foil Using Amino Carboxylic Acids
Arun Ghosh et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2009)
Effect of Adhesive Thickness and Properties on the Biaxial Interfacial Shear Stresses in Bonded Joints Using a Continuum Mixture Model
Sayed A. Nassar et al.
JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME (2009)
Failure by simultaneous grain growth, strain localization, and interface debonding in metal films on polymer substrates
Nanshu Lu et al.
JOURNAL OF MATERIALS RESEARCH (2009)
Thermally Self-Healing Polymeric Materials: The Next Step to Recycling Thermoset Polymers?
Youchun Zhang et al.
MACROMOLECULES (2009)
Safety and Robustness of Coated Pellets: Self-Healing Film Properties and Storage Stability
Simon Ensslin et al.
PHARMACEUTICAL RESEARCH (2009)
Self-healing of high elasticity block copolymers
Magdalena Dorina Chipara et al.
POLYMERS FOR ADVANCED TECHNOLOGIES (2009)
Preparation and Properties of a novel remendable coating concept
Marielle Wouters et al.
PROGRESS IN ORGANIC COATINGS (2009)
Stratification, stimuli-responsiveness, self-healing, and signaling in polymer networks
Marek W. Urban
PROGRESS IN POLYMER SCIENCE (2009)
Buckling behavior of metal film/substrate structure under pure bending
Ying Li et al.
APPLIED PHYSICS LETTERS (2008)
A New Concept for Adhesion Promotion in Metal-Polymer Systems by Introduction of Covalently Bonded Spacers at the Interface
J. Friedrich et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2008)
Engineered Nanostructures for Multifunctional Single-Walled Carbon Nanotube Reinforced Silicon Nitride Nanocomposites
Erica L. Corral et al.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY (2008)
ESR investigations on polyethylene-single wall carbon nanotube composites
Mircea Chipara et al.
JOURNAL OF MATERIALS SCIENCE (2008)
Effect of reactive graphitic nanofibers (r-GNFs) on tensile behavior of UHMWPE fiber/nano-epoxy bundle composites
S. Jana et al.
MATERIALS AND MANUFACTURING PROCESSES (2008)
Effects of ion beam treatment on atomic and macroscopic adhesion of copper to different polymer materials
V. Zaporojtchenko et al.
NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS (2007)
Bending of bonded composite repairs for aluminum aircraft structures: A design study
Randal J. Clark et al.
JOURNAL OF AIRCRAFT (2007)
Thermal stresses in aluminum 6061 and nylon 66 long fiber thermoplastic (LFT) composite joint in a tailcone
Rahul R. Kulkarni et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Investigation into cracked aluminum plate repaired with bonded composite patch
V. Sabelkin et al.
COMPOSITE STRUCTURES (2007)
Surface roughening of metal-polymer systems during plastic deformation
R. van Tijum et al.
ACTA MATERIALIA (2007)
Adhesion along metal-polymer interfaces during plastic deformation
R. van Tijum et al.
JOURNAL OF MATERIALS SCIENCE (2007)
Limit strength and reeling effects of sandwich pipes with bonded layers
X. Castello et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2007)
Ductility of thin metal films on polymer substrates modulated by interfacial adhesion
Teng Li et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2007)
Characterization of the flexural behavior of a reactive graphitic nanofibers reinforced epoxy using a non-linear damage model
Soumen Jana et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2007)
Benzoyl peroxide initiated in situ functionalization, processing, and mechanical properties of single-walled carbon nanotube-polypropylene composite fibers
Daneesh McIntosh et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2007)
Processing a glass fiber reinforced vinyl ester composite with nanotube enhancement of interlaminar shear strength
Jiang Zhu et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Evaluation of adhesion property of UHMWPE fibers/nano-epoxy by a pullout test
Soumen Jana et al.
JOURNAL OF ADHESION (2006)
Densely packed single-crystal Bi2Fe4O9 nanowires fabricated from a template-induced sol-gel route
Zhi Yang et al.
JOURNAL OF SOLID STATE CHEMISTRY (2006)
The effects of ion beam treatment on the interfacial adhesion of Cu/polyimide system
Myung-Han Kim et al.
METALS AND MATERIALS INTERNATIONAL (2006)
Nanocomposite fiber systems processed from fluorinated single-walled carbon nanotubes and a polypropylene matrix
Daneesh McIntosh et al.
CHEMISTRY OF MATERIALS (2006)
Impact and post-impact vibration response of protective metal foam composite sandwich plates
Uday K. Vaidya et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2006)
Wettability of nano-epoxies to UHMWPE fibers
S. Neema et al.
JOURNAL OF COLLOID AND INTERFACE SCIENCE (2006)
Processing and mechanical properties of fluorinated single-wall carbon nanotube-polyethylene composites
ML Shofner et al.
CHEMISTRY OF MATERIALS (2006)
Effects of patch layer and loading frequency on fatigue fracture behavior of aluminum plate repaired with a boron/epoxy composite patch
A Salehi-Khojin et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2006)
Some recent progress in adhesion technology and science
J Cognard
COMPTES RENDUS CHIMIE (2006)
Effects of thermal residual stresses on failure of co-cured lap joints with steel and carbon fiber-epoxy composite adherends under static and fatigue tensile loads
KC Shin et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2006)
Testing and evaluation on the thermal and mechanical properties of carbon nano fiber reinforced SC-15 epoxy
F Pervin et al.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (2005)
An investigation of plasma processes in titanium(iv) isobutoxide: the formation of films on Ti and Si
RA DiFelice et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2005)
The effects of bonding clearance and interference fit on the strength of adhesively bonded cylindrical components
T Sekercioglu et al.
MATERIALS & DESIGN (2005)
Graphitic carbon nanofiber (GCNF)/polymer materials. II. GCNF/epoxy monoliths using reactive oxydianiline linker molecules and the effect of nanofiber reinforcement on curing conditions
WH Zhong et al.
POLYMER COMPOSITES (2005)
Symmetric and asymmetric deformation transition in the regularly cell-structured materials. Part II: Theoretical study
K Tantikom et al.
INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES (2005)
Hydrated oxide film growth on aluminium alloys immersed in warm water
PR Underhill et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Development of an improved adhesive test method for composite assembly design
JY Cognard et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2005)
Performance of 2024-T3 aluminium adhesive bonded joints
I Pires et al.
MATERIALS AND MANUFACTURING PROCESSES (2005)
Effect of residual stresses on fatigue crack growth behavior of aluminum substrate repaired with a bonded composite patch
WH Zhong et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2005)
A facile approach to formation of through-hole porous anodic aluminum oxide film
YC Zhao et al.
MATERIALS LETTERS (2005)
Influence of P/L ratio and peroxide/amine concentrations on shrinkage-strain kinetics during setting of PMMA/MMA biomaterial formulations
N Silikas et al.
BIOMATERIALS (2005)
Thermal analysis of an acrylonitrile-butadiene-styrene/SWNT composite
SY Yang et al.
POLYMER DEGRADATION AND STABILITY (2004)
Surface modification of polytetrafluoroethylene for adhesive bonding
E David et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Reinforcing epoxy polymer composites through covalent integration of functionalized nanotubes
J Zhu et al.
ADVANCED FUNCTIONAL MATERIALS (2004)
Development of carbon/epoxy structural components for a high performance vehicle
P Feraboli et al.
COMPOSITES PART B-ENGINEERING (2004)
Critical fracture toughness, JC and δ5C, of unidirectional fibre-metal laminates
EM Castrodeza et al.
THIN-WALLED STRUCTURES (2003)
Nanofluids containing multiwalled carbon nanotubes and their enhanced thermal conductivities
HQ Xie et al.
JOURNAL OF APPLIED PHYSICS (2003)
Single wall nanotube and vapor grown carbon fiber reinforced polymers processed by extrusion freeform fabrication
ML Shofner et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2003)
Formation of epoxy-diamine/metal interphases
AA Roche et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2002)
JKR contact mechanics for evaluating surface contamination on inorganic substrates
DL Woerdeman et al.
INTERNATIONAL JOURNAL OF ADHESION AND ADHESIVES (2002)
Design guidelines for composite patches bonded to cracked aluminum substrates
HA Aglan et al.
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY (2002)
Autonomic healing of polymer composites
SR White et al.
NATURE (2001)
Advances in fusion bonding techniques for joining thermoplastic matrix composites: a review
C Ageorges et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2001)
Investigation of the size effect of composite patching repaired on edge-cracked plates
WC Wang et al.
COMPOSITE STRUCTURES (2000)
On the fracture mechanical behaviour of fibre reinforced metal laminates (FRMLs)
A Afaghi-Khatibi et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2000)
分享论文
