Electrochemical performances of the as-melt La0.75-xMxMg0.25Ni3.2Co0.2Al0.1 (M = Pr, Zr; x=0, 0.2) alloys applied to Ni/metal hydride (MH) battery

The partial replacement of La by M (M = Pr, Zr) has been performed in order to ameliorate the electrochemical hydrogen storage performances of La-Mg-Ni-based A(2)B(2)-type electrode alloys. For this purpose, we adopt melt spinning technology to prepare the La0.75-xMxMg0.25Ni3.2Co0.2Al0.1 (m = Pr, Zr; x = 0, 0.2) electrode alloys. Then systemically investigate the effects that the preparation methods and M (M = Pr, Zr) substitution have on the structures and electrochemical hydrogen storage characteristics of the alloys. The analysis of XRD and TEM reveals that the as-cast and spun alloys hold a multiphase structure, containing two main phases (La, Mg)(2)Ni-7 and LaNi5 as well as a trace of residual phase LaNi2. Besides, the as-spun (M = Pr) alloy displays an entire crystalline structure, while an amorphous-like structure is detected in the as-spun (M = Zr) alloy, implying the replacement of La by Zr facilitates forming amorphous phase. Based upon electrochemical measurements, an impact engendered by melt spinning on the electrochemical performances of the alloys appears to be evident. The cycle stabilities monotonously augment with the growing of the spinning rate. The discharge capacity and high rate discharge ability (HRD), however, exhibit difference. For the (M = Pr) alloy, they first mount up and then fall with the rising of the spinning rate, whereas for the (M = Zr) alloy, they always decline as the spinning rate elevates. Furthermore, the replacement of La by M (M = Pr, Zr) considerably enhances the cycle stability of the alloys and the replacement of La by Pr clearly increases the discharge capacity, but the Zr replacement results in an adverse impact. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.