Oxygen permeation and coal-gas-assisted hydrogen production using oxygen transport membranes

A tubular oxygen transport membrane (OTM) was developed to produce hydrogen via water splitting using fossil sources. In this study, two OTM materials, La(0.7)Sr(0.3)Cu(0.2)Fe(0.8)O(3-delta)(LSCF) and BaFe(0.9)Zr(0.1)O(3-delta) (BFZ), were prepared by a conventional solid-state technique. In tests with an LSCF thin-film tube (thickness approximate to 30 mu m) as an OTM, hydrogen was produced by flowing simulated product streams from coal gasification on one side of the OTM and steam on the other side. In this method, the coal gas on the oxygen-permeate side drives the removal of oxygen from the other hydrogen-generation side of the OTM, where hydrogen and oxygen are produced by water splitting. With CO (99.5% purity) flowing on the oxygen-permeate side, the hydrogen production rate of the LSCF tube was measured to be approximate to 19.6 cm(3)/min at 900 degrees C, indicating that hydrogen can be produced at a significant rate by using product streams from coal gasification. Concentration polarization effects were found to lower the hydrogen production rate of the LSCF thin-film tube at high temperatures. This process also yields a CO(2)-rich product stream that is ready for sequestration. The other candidate OTM material, BFZ, was tested by measuring its oxygen-permeation flux, DC conductivity, and hydrogen production, and by evaluating its microstructure. The dependences of the hydrogen production rate of BFZ disks (thickness, approximate to 1.6 mm) on water partial pressure and temperature were determined while flowing 80% CO(2)/He over a graphite rod on the oxygen-permeate side and humidified N(2) on the hydrogen-generation side. Preliminary results indicate that BFZ is a promising OTM material. Copyright (C) 2011, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.