Condensation of vapor in the presence of non-condensable gas in condensers

This paper presents a set of differential and algebraic equations that model heat and mass transfer in condensers in which a mixture of water vapor and non-condensable gas is cooled. The model has been used to predict the condensation rate, the bulk temperatures of the coolant and the gas-vapor mixture, and the surface temperatures of the condenser wall. The predicted results for counter flow tube condensers are compared with three sets of published experimental data for system in which air is the non-condensable gas. It is found that the predicted condensation rates and coolant bulk temperatures agree very well with all the three sets of experimental data, the predicted wall temperatures agree reasonably well with the experimental results, and the agreement between the predictions and the experimental results on the bulk temperature of the air-vapor mixture is excellent for one set of the experimental data, reasonable for the second set of experimental data, but poor for the third set of experimental data. It is suggested that the poor agreement between the predicted and measured bulk temperatures of the mixture for the third set of experimental data arises from the experimental errors. The results from this study show that when modeling vapor condensation in the presence of a non-condensable gas, a simple model for the mixture channel alone may not be sufficient since neither the temperature nor the heat flux at the wall can be assumed to be constant. The results also show that the wall temperature in the coolant channel can be quite high, and careful modeling of the heat transfer in the coolant channel is needed in order to achieve good agreement between the model predictions and the experimental results. Crown Copyright (C) 2011 Published by Elsevier Ltd. All rights reserved.