相关参考文献
注意：仅列出部分参考文献，下载原文获取全部文献信息。Multi-objective parametric optimization of nano powder mixed electrical discharge machining of AlSiCp using response surface methodology and particle swarm optimization
Shalini Mohanty et al.
ALEXANDRIA ENGINEERING JOURNAL (2018)
The use of response surface methodology (RSM) to optimize the acid digestion parameters in fiber volume fraction test of aircraft composite structures
M. H. Hassan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Investigating the effects of as-casted and in situ heat-treated squeeze casting of Al-3.5 % Cu alloy
Shoaib Sarfraz et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effects of wire-Cut EDM process parameters on surface roughness of HSLA steel
Junaid Ali Abbasi et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Optimization of MQL flow rate for minimum cutting force and surface roughness in end milling of hardened steel (HRC 40)
Mozammel Mia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Effect of time-controlled MQL pulsing on surface roughness in hard turning by statistical analysis and artificial neural network
Mozammel Mia et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2017)
Analysis of the influence of EDM parameters on surface finish, material removal rate, and electrode wear of an INCONEL 600 alloy
A. Torres et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Modelling of surface finish, electrode wear and material removal rate in electrical discharge machining of hard-to-machine alloys
A. Torres et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2015)
Surface roughness modeling using RSM for HSLA steel by coated carbide tools
Muhammad Azam et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2015)
Optimization of machining parameters for EDM operations based on central composite design and desirability approach
Subramanian Gopalakannan et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2014)
Atomistic Study of the Lattice Thermal Conductivity of Rough Graphene Nanoribbons
Hossein Karamitaheri et al.
IEEE TRANSACTIONS ON ELECTRON DEVICES (2013)
EDM of cast Al/SiC metal matrix nanocomposites by applying response surface method
S. Gopalakannan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Estimating the effect of process parameters on MRR, TWR and radial overcut of EDMed AISI D2 tool steel by RSM and GRA coupled with PCA
M. K. Pradhan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2013)
Electrical discharge machining characteristics of nickel-titanium shape memory alloy based on full factorial design
Ali Alidoosti et al.
JOURNAL OF INTELLIGENT MATERIAL SYSTEMS AND STRUCTURES (2013)
Simultaneous optimization of dimensional accuracy and surface roughness for finishing cut of wire-EDMed K460 tool steel
Kannachai Kanlayasiri et al.
PRECISION ENGINEERING-JOURNAL OF THE INTERNATIONAL SOCIETIES FOR PRECISION ENGINEERING AND NANOTECHNOLOGY (2013)
A parametric study of electrical discharge machining process parameters on machining of cast Al/B4C metal matrix nanocomposites
S. Gopalakannan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE (2013)
Surface integrity characteristics in wire-EDM of inconel 718 at different discharge energy
L. Li et al.
PROCEEDINGS OF THE SEVENTEENTH CIRP CONFERENCE ON ELECTRO PHYSICAL AND CHEMICAL MACHINING (ISEM) (2013)
Determination of process parameters in the laser micromilling application using Taguchi method: A case study for AISI H13 tool steel
Sefika Kasman et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2012)
INVESTIGATING THE EFFECTS OF EDM PARAMETERS ON SURFACE INTEGRITY, MRR AND TWR IN MACHINING OF Ti-6Al-4V
B. Jabbaripour et al.
MACHINING SCIENCE AND TECHNOLOGY (2012)
Study on the nano-powder-mixed sinking and milling micro-EDM of WC-Co
Muhammad Pervej Jahan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Multiple-response optimization for micro-endmilling process using response surface methodology
U. Natarajan et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2011)
Graphene Colloidal Suspensions as High Performance Semi-Synthetic Metal-Working Fluids
J. Samuel et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2011)
Optimization of EDM process for multiple performance characteristics using Taguchi method and Grey relational analysis
Jong Hyuk Jung et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2010)
Optimization of Material Removal Rate in Micro-EDM Using Artificial Neural Network and Genetic Algorithms
K. P. Somashekhar et al.
MATERIALS AND MANUFACTURING PROCESSES (2010)
Thermo-physical modeling of die-sinking EDM process
S.N. Joshi et al.
Journal of Manufacturing Processes (2010)
Multi-response optimization of EDM with Al-Cu-Si-TiC P/M composite electrode
T. A. El-Taweel
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Investigations into the effect of tool shapes with size factor consideration in sink electrical discharge machining (EDM) process
M. S. Sohani et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
A study on the fine-finish die-sinking micro-EDM of tungsten carbide using different electrode materials
M. P. Jahan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2009)
The effects of aging on machinability of 6061 aluminium alloy
Halil Demir et al.
MATERIALS & DESIGN (2009)
Material removal rate and electrode wear ratio study on the powder mixed electrical discharge machining of cobalt-bonded tungsten carbide
Kuang-Yuan Kung et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2009)
Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC
Tamer Ozben et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2008)
Modeling and analysis of the effects of machining parameters on the performance characteristics in the EDM process of Al2O3+TiC mixed ceramic
Ko-Ta Chiang
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Electrode wear and material removal rate during EDM of aluminum and mild steel using copper and brass electrodes
A. A. Khan
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2008)
Electrical discharge machining of titanium alloy (Ti-6Al-4V)
Ahmet Hascalik et al.
APPLIED SURFACE SCIENCE (2007)
Electrical discharge machining of functionally graded 15-35 vol% SiCp/Al composites
Y. W. Seo et al.
MATERIALS AND MANUFACTURING PROCESSES (2006)
Application of response surface methodology in the optimization of cutting conditions for surface roughness
H Öktem et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Parametric optimization of powder mixed electrical discharge machining by response surface methodology
HK Kansal et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2005)
Two-dimensional gas of massless Dirac fermions in graphene
KS Novoselov et al.
NATURE (2005)
The effect in EDM of a dielectric of a urea solution in water on modifying the surface of titanium
BH Yan et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2005)
Electric discharge machining of Al-10%SiCp as-cast metal matrix composites
PN Singh et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Electric discharge machining of Al-SiC metal matrix composites using rotary tube electrode
B Mohan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
Investigation of material removal mechanisms in EDM of composite ceramic materials
B Lauwers et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
An index to evaluate the wear resistance of the electrode in micro-EDM
YY Tsai et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2004)
P/M aluminum matrix composites: an overview
JM Torralba et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2003)
Aluminium matrix composites: Challenges and opportunities
MK Surappa
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES (2003)
Effect of SiC and rotation of electrode on electric discharge machining of Al-SiC composite
B Mohan et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2002)
Optimisation of the EDM process based on the orthogonal array with fuzzy logic and grey relational analysis method
CL Lin et al.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (2002)
Blind-hole drilling of Al2O3/6061Al composite using rotary electro-discharge machining
CC Wang et al.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (2000)
分享论文
