Reaction Kinetics of the Lignin Conversion in Supercritical Water

The effect of temperature (390-450 degrees C) and residence time (0.5-10 s) at a pressure of 25 MPa was investigated for lignin conversion in supercritical water (SCW) using a continuous flow apparatus designed to rapidly heat the system to the desired reaction temperature. Conversion of lignin in SCW occurs rapidly, and complete depolymerization can be achieved within a 5 s residence time. A high degree of depolymerization is achieved from rapid heating to supercritical temperatures. In addition, supercritical conditions result in a high yield of solid that does not significantly change with an increase in temperature or residence time. To test the suggested hypothesis that the formation of low molecular weight fragments and cross-linking of these fragments forms higher molecular weight fragments, the yield of char, gaseous products, phenolic compounds (phenol, guaiacol, catechol, o-cresol, m-cresol, and catechol) and aromatic hydrocarbons (benzene, toluene, and naphthalene) were determined. The formation of phenolic compounds at short residence time indicates that ether bonds in lignin are easily degraded under supercritical conditions. A reaction network model was proposed, and the subsequent kinetic parameters for the conversion pathways were determined by assuming a first-order reaction. It is observed that the rate constant of overall lignin conversion obeys Arrhenius behavior. The individual rate constants of each reaction in the network are evaluated to determine conformity to Arrhenius behavior.