Ballistic Test of Multilayered Armor with Intermediate Epoxy Composite Reinforced with Jute Fabric

Multilayered armors with a front ceramic followed by aramid fabric (Kevlar (TM)) are currently used against high velocity ammunition. In these armors, a front ceramic layer that shatters and spalls the bullet is followed by an intermediate layer, usually plies of aramid fabric, which dissipates both the bullet and ceramic fragments energy. In the present work, the intermediate aramid fabric layer was replaced by an equal thickness layer of 30 vol% jute fabric reinforced epoxy composite. Ballistic impact test with 7.62 caliber ammunition revealed that both the plain epoxy and the jute fabric composite have a relatively similar performance of the Kevlar (TM) and also attended the NIJ standard for body protection. The energy dissipation mechanisms of jute fabric composite were analyzed by scanning electron microscopy and found to be the rupture of the brittle epoxy matrix as well as the interaction of the jute fibers with the post-impact fragments. This latter is the same mechanism recently disclosed for aramid fabric. However, the lightness and lower cost of the jute fabric composite are additional advantages that favor its substitution for the aramid fabric.