A Method of Reducing the Peak-to-Average Ratio of LED Current for Electrolytic Capacitor-Less AC-DC Drivers

This paper proposes a concept of electrolytic capacitor-less light-emitting diode (LED) driver, which converts the commercial ac voltage to a pulsating current with twice the line frequency driving high-brightness LEDs. As no electrolytic capacitor is used, this driver possesses the unique advantage of long lifetime to match with that of LEDs. A method of injecting the third and fifth harmonics into the input current to reduce the peak-to-average ratio of the output current is also proposed. While ensuring that the input power factor is higher than 0.9 to meet regulation standards such as ENERGY STAR, the proposed method allows the peak-to-average ratio of the output current to be reduced to 1.34 theoretically, which is beneficial for the safe operation of the LEDs. As an example, a flyback-based electrolytic capacitor-less LED driver is proposed, and its operation is analyzed. In order to inject the third and fifth harmonics into the input current, the function of the duty cycle in a half-line cycle is derived. It is then simplified to a fitting function, which can be easily implemented with the input voltage sensing. A 25 V, 0.35 A output prototype is built and tested in the laboratory, and the experimental results are presented to verify the effectiveness of the electrolytic capacitorless LED driver and its control method.