Bendable Ultra-Thin Chips on Flexible Foils

This paper presents ultra-thin silicon chips (flex-chips) on flexible foils, realized through post-processing steps such as wafer thinning, dicing, and transferring the thinned chips to flexible polyimide foils. The cost effective chemical etching is adopted for wafer thinning and the transfer printing approach, to transfer quasi 1-D structures such as micro/nanoscale wires and ribbons, that is adapted for transferring large ultrathin flex-chips (widths 4.5-15 mm, lengths 8-36 mm, and thickness approximate to 15 mu m). The post-processing capability is demonstrated with passive structures such as metal interconnects realized on the flex-chips before carrying out the chip thinning step. The resistance values of metal interconnects do not show any appreciable change because of bending of chips for the tested range viz., radius of curvature 9 mm and above. Further, the bending mechanics of silicon membranes on foil is investigated to evaluate the bending limits before a mechanical fracture/failure occurs. The distinct advantages of this paper are: attaining bendability through post-processing of chips, cost effective fabrication process, and easy transfer of chips to the flexible substrates without using conventional and sophisticated equipment such as pick and place set up.