Article
Construction & Building Technology
Zhi Ding, Xiao Zhang, Shao-Heng He, Yong-Jie Qi, Cun-Gang Lin
Summary: This study investigates the longitudinal behavior of a shield tunnel by designing and constructing a reduced-size indoor model. The results show that the longitudinal settlement of the tunnel follows a normal distribution, with the maximum settlement occurring at the central ring and increasing linearly with the applied load. Stress concentration typically occurs on the side of the tunnel waist under surcharge, resulting in transverse elliptical deformation of the entire structure.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
(2024)
Article
Construction & Building Technology
Lucia Lopez-de-Abajo, Marcos G. Alberti, Jaime C. Galvez
Summary: Assessing and predicting concrete damage is crucial for infrastructure management. This study quantifies gas concentrations in urban tunnels to achieve this goal.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
(2024)
Article
Construction & Building Technology
Chao He, Yinghao Cai, Chenqiang Pu, Shunhua Zhou, Honggui Di, Xiaohui Zhang
Summary: This paper investigates the impact of river channel excavation on adjacent metro tunnels and proposes protective measures based on an engineering project in Fuzhou, China. A three-dimensional finite element model is developed to calculate the displacements and distortion of tunnels under different excavation sequences and soil reinforcement measures. Real-time monitoring confirms that the vertical displacements and diametrical distortion of tunnels are primarily caused by the excavation of the river above the tunnels, while horizontal displacements are induced by the excavation next to the tunnels. The study recommends a combination of cement slurry with a portal form and concrete with a plate form for soil reinforcement and tunnel protection.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
(2024)
Article
Engineering, Environmental
Shi-chun Cai, Xiao-hua Yang, Fei Ye
Summary: A calculation method based on the Winkler foundation model is proposed for analyzing the stress and deformation in excavation support structures in seasonally frozen soil regions. The method considers various factors and has been validated to exhibit good applicability.
COLD REGIONS SCIENCE AND TECHNOLOGY
(2024)
Article
Construction & Building Technology
Gilsu Jeong, Minhyuk Jung, Seongeun Park, Moonseo Park, Changbum Ryan Ahn
Summary: This study introduces a contextual audio-visual approach to recognize multi-equipment activities in tunnel construction sites, improving monitoring effectiveness. Tested against real-world operation data, the model achieved remarkable results, emphasizing the potential of contextual multimodal models in enhancing operational efficiency in complex construction sites.
AUTOMATION IN CONSTRUCTION
(2024)
Article
Engineering, Environmental
Mikael Schlumpf, Jordy Hendrikx, John Stormont, Ryan Webb
Summary: The formation of wet-snow slab avalanches is related to the liquid water content and strength of the snow layers. However, current studies disagree on this relationship and there is limited understanding of snow layers with a saturation level of θ=7% and above.
COLD REGIONS SCIENCE AND TECHNOLOGY
(2024)
Article
Construction & Building Technology
Elyas Asadi Shamsabadi, Seyed Mohammad Hassan Erfani, Chang Xu, Daniel Dias-da-Costa
Summary: Authors acknowledge the support from the University of Sydney.
AUTOMATION IN CONSTRUCTION
(2024)
Article
Construction & Building Technology
Yaosheng Liu, Ang Li, Feng Dai, Ruochen Jiang, Yi Liu, Rui Chen
Summary: In this study, a hybrid model based on a multilayer perceptron (MLP) and meta-heuristic algorithms was developed to improve blast performance during tunnel excavation. Precise prediction of post-blasting indicators was important for optimization, and a comparison of meta-heuristic algorithms was conducted to find the most suitable model. The results showed that the developed model effectively reduces overbreak areas and quantitatively analyzes the influence of geological conditions.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
(2024)
Article
Construction & Building Technology
Zhengyi Chen, Hao Wang, Keyu Chen, Changhao Song, Xiao Zhang, Boyu Wang, Jack C. P. Cheng
Summary: This study proposes an improved coverage path planning system that leverages building information modeling and robotic configurations to optimize coverage performance in indoor environments. Experimental validation shows the effectiveness and applicability of the system. Future research will focus on further enhancing coverage ratio and optimizing computation time.
AUTOMATION IN CONSTRUCTION
(2024)
Review
Construction & Building Technology
Yonglin Fu, Junjie Chen, Weisheng Lu
Summary: This study presents a review of human-robot collaboration (HRC) in modular construction manufacturing (MCM), focusing on tasks, human roles, and interaction levels. The review found that HRC solutions are applicable to various MCM tasks, with a primary focus on timber component production. It also revealed the diverse collaborative roles humans can play and the varying levels of interaction with robots.
AUTOMATION IN CONSTRUCTION
(2024)
Review
Construction & Building Technology
Jorge Loy-Benitez, Myung Kyu Song, Yo-Hyun Choi, Je-Kyum Lee, Sean Seungwon Lee
Summary: This paper discusses the advancement of tunnel boring machines (TBM) through the application of artificial intelligence. It highlights the significance of AI-based management subsystems for automatic TBM operations and presents recent contributions in this field. The paper evaluates modeling, monitoring, and control subsystems and suggests research paths for integrating existing management subsystems into TBM automation.
AUTOMATION IN CONSTRUCTION
(2024)
Article
Engineering, Civil
Avinkrishnan Vijayachandran, Othman Oudghiri-Idrissi, Hrishikesh Danawe, Xiaoming Mao, Ellen Arruda, Serife Tol, Anthony M. Waas
Summary: The study investigates the impact of creasing, crumpling, and folding on the flexural rigidity of thin elastic plates. It introduces an analysis of a structured plate with creases and reveals a significant increase in the fundamental frequency compared to a flat configuration. Scaling laws are also proposed for such structured plates, and an optimization problem is solved to achieve maximum flexural stiffness. The results show promising improvements in stiffness with minimal increase in mass/surface area.
THIN-WALLED STRUCTURES
(2024)
Correction
Engineering, Civil
Zhiwei Wan, Xiang Zhu, Tianyun Li, Yueyang Han, Wenjie Guo
THIN-WALLED STRUCTURES
(2024)
Article
Engineering, Civil
Peng Liu, Yinglong Cai, Zhenqiang Zhao, Chao Zhang
Summary: An elastoplastic mechanical-thermal constitutive model was integrated into a mesoscale finite element model to analyze the temperature rise phenomenon and failure behavior of composites under impact loading conditions. The numerical predictions successfully reproduced the observed failure modes and accurately captured the temperature distribution. The study explored the main factors of temperature rise and found that the plastic work of the matrix and the fracture transformed energy of the fiber tow were the primary sources of temperature rise. The transverse specimen exhibited superior energy absorption capacity under high-energy impacts.
THIN-WALLED STRUCTURES
(2024)
Article
Engineering, Environmental
Guanjun Wei, Chuanjin Lei, Maoning Gao, Hongyu Zhou, Xin Li, Chaoyue Zhang
Summary: This study introduces a novel approach to improve the accuracy of deformation prediction in frozen soil areas by integrating post-processing deformation from InSAR with a frost heave model using the EnKF assimilation algorithm. Experimental results show that this approach reduces the RMSE to 0.247 mm, indicating its high feasibility and practicality.
COLD REGIONS SCIENCE AND TECHNOLOGY
(2024)
Article
Engineering, Civil
Animesh Kundu, Atanu Banerjee
Summary: Shape memory alloys (SMAs) undergo large recoverable deformation due to their phase transformation. This study extends the constitutive model of SMA to consider large displacement and rotation effect and transformation induced material level coupling. The finite element model is solved using the Newton-Raphson iterative technique to solve the mechanical and thermal equilibrium equations. The efficacy and robustness of the model are demonstrated through practical applications of SMA-based members.
THIN-WALLED STRUCTURES
(2024)
Article
Construction & Building Technology
Jia Liang, Qipeng Zhang, Xingyu Gu
Summary: A lightweight PCSNet-based segmentation model is developed to address the issues of insufficient performance in feature extraction and boundary loss information. The introduction of generalized Dice loss improves prediction performance, and the visualization of class activation mapping enhances model interpretability.
AUTOMATION IN CONSTRUCTION
(2024)
Article
Engineering, Civil
Shangchun Jiang, Liangfeng Sun, Haifei Zhan, Zhuoqun Zheng, Xijian Peng, Chaofeng Lue
Summary: This study investigates the bending behavior of two-dimensional nanomaterials, diamane and its analogous structure TBGIB, through atomistic simulations. It reveals that diamane experiences structural failure under bending, while TBGIB bends elastically before undergoing structural failure. The study provides valuable insights for the application of these materials in flexible electronics.
THIN-WALLED STRUCTURES
(2024)
Article
Engineering, Civil
Youzhe Yang, Jun Ma, Jie Yang, Yingyan Zhang
Summary: Two-dimensional nanomaterials like graphene and h-BN have high mechanical strength and thermal conductivity, making them ideal reinforcing fillers for impact protection materials, phase change materials, and thermal interface materials. However, the mechanical properties of graphene/h-BN heterostructures have not been widely explored. This study used molecular dynamics simulations and finite element analysis to investigate the mechanical properties, fracture mechanisms, and manipulation techniques of graphene/h-BN heterostructures. The results show that heterogeneous GBN has excellent performance in resisting bending deformation, and its size-dependent performance can be manipulated through hydrogenation and layer number.
THIN-WALLED STRUCTURES
(2024)
Article
Construction & Building Technology
Xiang Shen, Yifan Chen, Liqiang Cao, Xiangsheng Chen, Yanbin Fu, Chengyu Hong
Summary: In this paper, a machine learning-based method for predicting the slurry pressure in shield tunnel construction is proposed. By considering the influence of fault fracture zones and setting the formation influence coefficient, the accuracy of the prediction is significantly improved.
TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY
(2024)