4.7 Article

The uplift resistance of pipes and plate anchors buried in sand

Journal

GEOTECHNIQUE
Volume 58, Issue 10, Pages 771-779

Publisher

ICE PUBLISHING
DOI: 10.1680/geot.2008.3692

Keywords

anchors; centrifuge modelling; design; model tests; sands

Ask authors/readers for more resources

The design of buried anchors and pipelines requires assessment of the peak uplift resistance. This paper describes a limit equilibrium solution for the uplift resistance of pipes and plate anchors buried in sand. The geometry of this solution reflects observations from model tests. Peak angles of friction and dilation are found using established correlations that capture the influence of stress level and density. These angles govern the geometry of the failure mechanism and the mobilised resistance. The solution is validated using a database of 115 model tests on pipes and strip anchors assembled from the published literature. Good agreement with the overall database is shown, without optimisation of any input parameters. The method overpredicts the uplift resistance of smooth model pipes by similar to 10%, highlighting the influence of pipe roughness. In contrast, it is shown that the solution for uplift resistance based on the limit theorems of plasticity is generally unconservative. The assumption of normality, which is required by the limit theorems, leads to an unrealistic failure mechanism involving uplift of a far wider zone of soil than is seen in model tests. Plasticity theory, with normality, is inappropriate for modelling this class of kinematically restrained problem in drained conditions, as normality is not observed. As finite element analysis is not routinely used in practice partly owing to the difficulty in selecting appropriate input parameters to describe dilatancy and plastic flow the simple analytical idealisation described in this paper provides a useful tool for uplift resistance prediction. Simple charts for the prediction of peak uplift resistance from critical state friction angle, relative density and normalised burial depth are presented, to aid the design of buried pipes and anchors.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available