Related references
Note: Only part of the references are listed.Multifunctional Structural Supercapacitor Composites Based on Carbon Aerogel Modified High Performance Carbon Fiber Fabric
Hui Qian et al.
ACS APPLIED MATERIALS & INTERFACES (2013)
Interfacial improvement of carbon fiber/epoxy composites using a simple process for depositing commercially functionalized carbon nanotubes on the fibers
Min Li et al.
CARBON (2013)
The effect of graphene dispersion on the mechanical properties of graphene/epoxy composites
Long-Cheng Tang et al.
CARBON (2013)
Uniaxial tension and compression characterization of hybrid CNS-glass fiber-epoxy composites
Sam Markkula et al.
COMPOSITE STRUCTURES (2013)
Fracture toughness and electrical conductivity of epoxy composites filled with carbon nanotubes and spherical particles
Long-Cheng Tang et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2013)
Fabrication and properties of CNTs/carbon fabric hybrid multiscale composites processed via resin transfer molding technique
Bai-Chen Wang et al.
COMPOSITES PART B-ENGINEERING (2013)
Improved dispersion and interface in the graphene/epoxy composites via a facile surfactant-assisted process
Yan-Jun Wan et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2013)
Carbon and glass hierarchical fibers: Influence of carbon nanotubes on tensile, flexural and impact properties of short fiber reinforced composites
S. Rahmanian et al.
MATERIALS & DESIGN (2013)
Mechanical properties and fracture behaviors of epoxy composites with multi-scale rubber particles
Long-Cheng Tang et al.
MATERIALS CHEMISTRY AND PHYSICS (2013)
Polyaniline Stabilized Magnetite Nanoparticle Reinforced Epoxy Nanocomposites
Hongbo Gu et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
The use of an electric field in the preparation of glass fibre/epoxy composites containing carbon nanotubes
D. Domingues et al.
CARBON (2012)
Continuous preparation of multiscale reinforcement by electrophoretic deposition of carbon nanotubes onto carbon fiber tows
Jinhai Guo et al.
CARBON (2012)
Surface modifications for the effective dispersion of carbon nanotubes in solvents and polymers
Sang Won Kim et al.
CARBON (2012)
Scalable continuous growth of carbon nanotubes on moving fiber substrates
H. C. Malecki et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
RTM processing and electrical performance of carbon nanotube modified epoxy/fibre composites
Elisabete F. Reia da Costa et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2012)
Effect of electrophoretically deposited carbon nanotubes on the interface of carbon fiber reinforced epoxy composite
Jinhai Guo et al.
JOURNAL OF MATERIALS SCIENCE (2012)
Influence of sizing emulsifier content on the properties of carbon fibers and its composites
Ruliang Zhang et al.
MATERIALS & DESIGN (2012)
Influence of sizing molecular weight on the properties of carbon fibers and its composites
R. L. Zhang et al.
MATERIALS & DESIGN (2012)
Preparation and characterization of carbon nanotubes/carbon fiber hybrid material by ultrasonically assisted electrophoretic deposition
Jinhai Guo et al.
MATERIALS LETTERS (2012)
Effect of the molecular weight of sizing agent on the surface of carbon fibres and interface of its composites
R. L. Zhang et al.
APPLIED SURFACE SCIENCE (2011)
Effect of emulsifier content of sizing agent on the surface of carbon fibres and interface of its composites
R. L. Zhang et al.
APPLIED SURFACE SCIENCE (2011)
Mechanical properties of carbon nanofiber/fiber-reinforced hierarchical polymer composites manufactured with multiscale-reinforcement fabrics
Alejandro J. Rodriguez et al.
CARBON (2011)
The effect of carbon nanotubes on the damage development in carbon fiber/epoxy composites
Niels De Greef et al.
CARBON (2011)
Effects of electrophoretically deposited carbon nanofibers on the interface of single carbon fibers embedded in epoxy matrix
Joseph D. Schaefer et al.
CARBON (2011)
Fracture mechanisms of epoxy filled with ozone functionalized multi-wall carbon nanotubes
Long-cheng Tang et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2011)
Noncovalent assembly of carbon nanotube-inorganic hybrids
Xianglong Li et al.
JOURNAL OF MATERIALS CHEMISTRY (2011)
Glass Fibers with Carbon Nanotube Networks as Multifunctional Sensors
Shang-lin Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2010)
Functional interphases with multi-walled carbon nanotubes in glass fibre/epoxy composites
Jie Zhang et al.
CARBON (2010)
Carbon nanotube grafted carbon fibres: A study of wetting and fibre fragmentation
Hui Qian et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
The effect of adding carbon nanotubes to glass/epoxy composites in the fibre sizing and/or the matrix
Ashish Warrier et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Tensile strength of glass fibres with carbon nanotube-epoxy nanocomposite coating: Effects of CNT morphology and dispersion state
Naveed A. Siddiqui et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
Dispersion and functionalization of carbon nanotubes for polymer-based nanocomposites: A review
Peng-Cheng Ma et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2010)
An assessment of the science and technology of carbon nanotube-based fibers and composites
Tsu-Wei Chou et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Interfacial shear strength of a glass fiber/epoxy bonding in composites modified with carbon nanotubes
A. Godara et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2010)
Carbon nanotube-based hierarchical composites: a review
Hui Qian et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Increased Interface Strength in Carbon Fiber Composites through a ZnO Nanowire Interphase
Yirong Lin et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Sensing of Damage Mechanisms in Fiber-Reinforced Composites under Cyclic Loading using Carbon Nanotubes
Limin Gao et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites
A. Godara et al.
CARBON (2009)
Tensile strength of glass fibres with carbon nanotube-epoxy nanocomposite coating
Naveed A. Siddiqui et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2009)
Processing, characterization, and modeling of carbon nanotube-reinforced multiscale composites
Myungsoo Kim et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Effect of carbon nanotubes on the interfacial shear strength of T650 carbon fiber in an epoxy matrix
R. J. Sager et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2009)
Application of nanomaterials in sizings for glass fibre/polypropylene hybrid yarn spinning
J. Rausch et al.
MATERIALS TECHNOLOGY (2009)
Improved fracture toughness of carbon fiber composite functionalized with multi walled carbon nanotubes
K. L. Kepple et al.
CARBON (2008)
Effects of surfactant treatment on mechanical and electrical properties of CNT/epoxy nanocomposites
Yan Geng et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Interlaminar shear strength of glass fiber reinforced epoxy composites enhanced with multi-walled carbon nanotubes
Zhihang Fan et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2008)
Self-healing polymeric materials: A review of recent developments
Dong Yang Wu et al.
PROGRESS IN POLYMER SCIENCE (2008)
In situ catalytic growth of carbon nanotubes on the surface of carbon cloth
Qiao-Juan Gong et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2007)
Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites
E. Bekyarova et al.
LANGMUIR (2007)
Controlling the dispersion of multi-wall carbon nanotubes in aqueous surfactant solution
Junrong Yu et al.
CARBON (2007)
Processing-structure-multi-functional property relationship in carbon nanotube/epoxy composites
Erik T. Thostenson et al.
CARBON (2006)
Effect of natural fibers on thermal and mechanical properties of natural fiber polypropylene composites studied by dynamic mechanical analysis
Mehdi Tajvidi et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Polymer crystallization-driven, periodic patterning on carbon nanotubes
LY Li et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2006)
Dispersions of surface-modified carbon nanotubes in water-soluble and water-insoluble polymers
L Vaisman et al.
ADVANCED FUNCTIONAL MATERIALS (2006)
Effects of PA6,6/PP ratio on the mechanical properties of short glass fiber reinforced and rubber-toughened polyamide 6,6/polypropylene blends
SY Fu et al.
COMPOSITES PART B-ENGINEERING (2006)
The effect of fiber concentration on mechanical and thermal proverties of fiber-reinforced polypropylene composites
S Houshyar et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2005)
On the post-mortem fracture surface morphology of short fiber reinforced thermoplastics
SY Fu et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Influence of nano-modification on the mechanical and electrical properties of conventional fibre-reinforced composites
FH Gojny et al.
COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (2005)
Carbon nanotube-reinforced epoxy-compo sites:: enhanced stiffness and fracture toughness at low nanotube content
FH Gojny et al.
COMPOSITES SCIENCE AND TECHNOLOGY (2004)
Individually suspended single-walled carbon nanotubes in various surfactants
VC Moore et al.
NANO LETTERS (2003)
Supramolecular self-assembly of lipid derivatives on carbon nanotubes
C Richard et al.
SCIENCE (2003)
Carbon nanotube/carbon fiber hybrid multiscale composites
ET Thostenson et al.
JOURNAL OF APPLIED PHYSICS (2002)