Full-length prion protein aggregates to amyloid fibrils and spherical particles by distinct pathways

As limited structural information is available on prion protein (PrP) misfolding and aggregation, a causative link between the specific (supra)molecular structure of PrP and transmissible spongiform encephalopathies remains to be elucidated. In this study, high pressure was utilized, as an approach to perturb protein structure, to characterize different morphological and structural PrP aggregates. It was shown that full-length recombinant PrP undergoes beta-sheet aggregation on high-pressure-induced destabilization. By tuning the physicochemical conditions, the assembly process evolves through two distinct pathways leading to the irreversible formation of spherical particles or amyloid fibrils, respectively. When the PrP aggregation propensity is enhanced, high pressure induces the formation of a partially unfolded aggregated protein, Agg(HP), which relaxes at ambient pressure to form amorphous aggregates. The latter largely retain the native secondary structure. On prolonged incubation at high pressure, followed by depressurization, Agg(HP) transforms to a monodisperse population of spherical particles of about 20 nm in diameter, characterized by an essentially beta-sheet secondary structure. When the PrP aggregation propensity is decreased, an oligomeric reaction intermediate, I-HP, is formed under high pressure. After pressure release, I-HP relaxes to the original native structure. However, on prolonged incubation at high pressure and subsequent depressurization, it transforms to amyloid fibrils. Structural evaluation, using optical spectroscopic methods, demonstrates that the conformation adopted by the subfibrillar oligomeric intermediate, I-HP, constitutes a necessary prerequisite for the formation of amyloids. The use of high-pressure perturbation thus provides an insight into the molecular mechanism of the first stages of PrP misfolding into amyloids.