Related references
Note: Only part of the references are listed.A modification of UniGrow 2-parameter driving force model for short fatigue crack growth
D. J. Bang et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2019)
High temperature fatigue and creep-fatigue behaviors in a Ni-based superalloy: Damage mechanisms and life assessment
Run-Zi Wang et al.
INTERNATIONAL JOURNAL OF FATIGUE (2019)
Statistical assessment of notch toughness against cleavage fracture of ferritic steels
G. Qian et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
A non-probabilistic reliability-based design optimization method for structures based on interval models
M. R. Wang et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Probabilistic fatigue life prediction and reliability assessment of a high pressure turbine disc considering load variations
Shun-Peng Zhu et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2018)
Time-dependent concurrent reliability-based design optimization integrating experiment-based model validation
Zhonglai Wang et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)
Substructure-based distributed collaborative probabilistic analysis method for low-cycle fatigue damage assessment of turbine blade-disk
Haifeng Gao et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2018)
Research on fault diagnosis methods for the reactor coolant system of nuclear power plant based on D-S evidence theory
Yongjian Gong et al.
ANNALS OF NUCLEAR ENERGY (2018)
Robust topology optimization under multiple independent unknown-but-bounded loads
JianTao Liu et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2018)
Fatigue reliability assessment of turbine discs under multi-source uncertainties
S. P. Zhu et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2018)
Evaluation and comparison of critical plane criteria for multiaxial fatigue analysis of ductile and brittle materials
Shun-Peng Zhu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Strain energy gradient-based LCF life prediction of turbine discs using critical distance concept
Shun-Peng Zhu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2018)
Computational-experimental approaches for fatigue reliability assessment of turbine bladed disks
Shun-Peng Zhu et al.
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (2018)
A Novel Time-Variant Reliability Analysis Method Based on Failure Processes Decomposition for Dynamic Uncertain Structures
Shui Yu et al.
JOURNAL OF MECHANICAL DESIGN (2018)
Critical plane-based multiaxial fatigue life prediction of turbine disk alloys by refining normal stress sensitivity
Shen Xu et al.
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (2018)
On the temperature independence of statistical model parameters for cleavage fracture in ferritic steels
Guian Qian et al.
PHILOSOPHICAL MAGAZINE (2018)
Reliability analysis of repairable systems with recurrent misuse-induced failures and normal-operation failures
Weiwen Peng et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)
Sequential time-dependent reliability analysis for the lower extremity exoskeleton under uncertainty
Shui Yu et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2018)
Time-variant reliability assessment for multiple failure modes and temporal parameters
Shui Yu et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2018)
A modeling and analysis strategy of constellation availability using on-orbit and ground added launch backup and its application in the reliability design for a remote sensing satellite
Hua Zhang et al.
ADVANCES IN MECHANICAL ENGINEERING (2018)
A fluid-structure analysis approach and its application in the uncertainty-based multidisciplinary design and optimization for blades
Debiao Meng et al.
ADVANCES IN MECHANICAL ENGINEERING (2018)
An enhanced genetic algorithm-based multi-objective design optimization strategy
Rong Yuan et al.
ADVANCES IN MECHANICAL ENGINEERING (2018)
A mean stress correction model for tensile and compressive mean stress fatigue loadings
A. Ince
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
A multi-objective optimization method for uncertain structures based on nonlinear interval number programming method
Xin Liu et al.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES (2017)
A multidisciplinary coupling relationship coordination algorithm using the hierarchical control methods of complex systems and its application in multidisciplinary design optimization
Rong Yuan et al.
ADVANCES IN MECHANICAL ENGINEERING (2017)
On the performance enhancement of thermo-compressor and steam turbine blade cascade in the presence of spontaneous nucleation
A. Ahmadpour et al.
ENERGY (2017)
A methodology for probabilistic prediction of fatigue crack initiation taking into account the scale effect
M. Muniz-Calvente et al.
ENGINEERING FRACTURE MECHANICS (2017)
Mean stress and ratcheting corrections in fatigue life prediction of metals
S. P. Zhu et al.
FATIGUE & FRACTURE OF ENGINEERING MATERIALS & STRUCTURES (2017)
A generalized mean stress correction model based on distortional strain energy
Ayhan Ince
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Generalized probabilistic model allowing for various fatigue damage variables
Jose Correia et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
Probabilistic framework for multiaxial LCF assessment under material variability
S. P. Zhu et al.
INTERNATIONAL JOURNAL OF FATIGUE (2017)
An efficient reliability analysis approach for structure based on probability and probability box models
Xin Liu et al.
STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (2017)
Structural reliability analysis based on probability and probability box hybrid model
Xin Liu et al.
STRUCTURAL SAFETY (2017)
An enhanced Monte Carlo simulation-based design and optimization method and its application in the speed reducer design
Rong Yuan et al.
ADVANCES IN MECHANICAL ENGINEERING (2017)
Novel adaptive surrogate model based on LRPIM for probabilistic analysis of turbine disc
Jianxing Mao et al.
AEROSPACE SCIENCE AND TECHNOLOGY (2017)
A Combined High and Low Cycle Fatigue Model for Life Prediction of Turbine Blades
Shun-Peng Zhu et al.
MATERIALS (2017)
Optimizing fluid-structure interaction systems with immersogeometric analysis and surrogate modeling: Application to a hydraulic arresting gear
Michael C. H. Wu et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Immersogeometric cardiovascular fluid-structure interaction analysis with divergence-conforming B-splines
David Kamensky et al.
COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING (2017)
Combining dependent bodies of evidence
Xiaoyan Su et al.
APPLIED INTELLIGENCE (2016)
Interaction balance optimization in multidisciplinary design optimization problems
Debiao Meng et al.
CONCURRENT ENGINEERING-RESEARCH AND APPLICATIONS (2016)
Optimization Strategy for a Shrouded Turbine Blade Using Variable-Complexity Modeling Methodology
Dianyin Hu et al.
AIAA JOURNAL (2016)
Forecasting the daily power output of a grid-connected photovoltaic system based on multivariate adaptive regression splines
Yanting Li et al.
APPLIED ENERGY (2016)
A local Kriging approximation method using MPP for reliability-based design optimization
Xiaoke Li et al.
COMPUTERS & STRUCTURES (2016)
Fatigue life prediction based on an equivalent initial flaw size approach and a new normalized fatigue crack growth model
J. A. F. O. Correia et al.
ENGINEERING FAILURE ANALYSIS (2016)
Probabilistic Power Flow Analysis Based on the Stochastic Response Surface Method
Zhouyang Ren et al.
IEEE TRANSACTIONS ON POWER SYSTEMS (2016)
Numerical simulations of sloshing flows with elastic baffles by using a particle-based fluid-structure interaction analysis method
Sung-Chul Hwang et al.
OCEAN ENGINEERING (2016)
Probabilistic Physics of Failure-based framework for fatigue life prediction of aircraft gas turbine discs under uncertainty
Shun-Peng Zhu et al.
RELIABILITY ENGINEERING & SYSTEM SAFETY (2016)
Reliability analysis of structures by iterative improved response surface method
Somdatta Goswami et al.
STRUCTURAL SAFETY (2016)
Numerical validation of computational stress and strain analysis model for notched components subject to non-proportional loadings
Ayhan Ince
THEORETICAL AND APPLIED FRACTURE MECHANICS (2016)
Multidisciplinary reliability design optimization using an enhanced saddlepoint approximation in the framework of sequential optimization and reliability analysis
Rong Yuan et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART O-JOURNAL OF RISK AND RELIABILITY (2016)
A concurrent reliability optimization procedure in the earlier design phases of complex engineering systems under epistemic uncertainties
Debiao Meng et al.
ADVANCES IN MECHANICAL ENGINEERING (2016)
Reliability modeling of multiple performance based on degradation values distribution
Haiqing Li et al.
ADVANCES IN MECHANICAL ENGINEERING (2016)
A probabilistic fatigue approach for riveted joints using Monte Carlo simulation
Rui F. Sanches et al.
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH (2015)
Reliability-Based Multidisciplinary Design Optimization Using Subset Simulation Analysis and Its Application in the Hydraulic Transmission Mechanism Design
Debiao Meng et al.
JOURNAL OF MECHANICAL DESIGN (2015)
Dependence Assessment in Human Reliability Analysis Using Evidence Theory and AHP
Xiaoyan Su et al.
RISK ANALYSIS (2015)
Novel structural modeling and mesh moving techniques for advanced fluid-structure interaction simulation of wind turbines
Y. Bazilevs et al.
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING (2015)
A nonlinear fatigue damage accumulation model considering strength degradation and its applications to fatigue reliability analysis
Rong Yuan et al.
INTERNATIONAL JOURNAL OF DAMAGE MECHANICS (2015)
Probabilistic modeling of damage accumulation for time-dependent fatigue reliability analysis of railway axle steels
Shun-Peng Zhu et al.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART F-JOURNAL OF RAIL AND RAPID TRANSIT (2015)
Integrated aerodynamic design and analysis of turbine blades
Chengen Wang
ADVANCES IN ENGINEERING SOFTWARE (2014)
Time-Dependent Reliability of Dynamic Systems Using Subset Simulation With Splitting Over a Series of Correlated Time Intervals
Zhonglai Wang et al.
JOURNAL OF MECHANICAL DESIGN (2014)
Mean-value first-order saddlepoint approximation based collaborative optimization for multidisciplinary problems under aleatory uncertainty
Debiao Meng et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2014)
Local unified probabilistic model for fatigue crack initiation and propagation: Application to a notched geometry
Jose A. F. O. Correia et al.
ENGINEERING STRUCTURES (2013)
Intermittent corner separation in a linear compressor cascade
Ma Wei et al.
EXPERIMENTS IN FLUIDS (2013)
Numerical study on near-stall flow unsteadiness in an axial compressor with casing treatment
Yoojun Hwang et al.
JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY (2013)
Fatigue assessment of a riveted shear splice based on a probabilistic model
Abilio M. P. De Jesus et al.
INTERNATIONAL JOURNAL OF FATIGUE (2010)
Share Paper
