Related references
Note: Only part of the references are listed.Engineering biodegradable polyester particles with specific drug targeting and drug release properties
Farahidah Mohamed et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2008)
Microporous structure and drug release kinetics of polymeric nanoparticles
Shilpa Sant et al.
LANGMUIR (2008)
On the design of in situ forming biodegradable parenteral depot systems based on insulin loaded dialkylaminoalkyl-amine-poly(vinyI alcohol)-g-poly (lactide-co-glycolide) nanoparticles
C. B. Packhaeuser et al.
JOURNAL OF CONTROLLED RELEASE (2007)
Paclitaxel distribution in poly(ethylene glycol)/poly(lactide-co-glycolic acid) blends and its release visualized by coherent anti-Stokes Raman scattering microscopy
Eunah Kang et al.
JOURNAL OF CONTROLLED RELEASE (2007)
Combinatorial design of passive drug delivery platforms
Sebastien Casault et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Physical ageing and thermal analysis of PLGA microspheres encapsulating protein or DNA
J. J. Rouse et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Effect of lactide/glycolide ratio on the in vitro release of ganciclovir and its lipophilic prodrug (GCV-monobutyrate) from PLGA microspheres
Kumar G. Janoria et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Comparative study of doxorubicin-loaded poly(lactide-co-glycolide) nanoparticles prepared by single and double emulsion methods
F. Tewes et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2007)
A different diffusion mechanism for drug molecules in amorphous polymers
Zhi-Jian Zhao et al.
JOURNAL OF PHYSICAL CHEMISTRY B (2007)
Effect of glycolide monomer on release behavior of gentamicin sulfate-loaded PLGA microparticles
Je Young Yoo et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2007)
Effect of WOW process parameters on morphology and burst release of FITC-dextran loaded PLGA microspheres
Shirui Mao et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Long acting porous microparticle for pulmonary protein delivery
Min Jung Kwona et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Protein release behavior from porous microparticle with lysozyme/hyaluronate ionic complex
Eun Seong Lee et al.
COLLOIDS AND SURFACES B-BIOINTERFACES (2007)
Stabilization of protein encapsulated in poly(lactide-co-glycolide) microspheres by novel viscous S/W/O/W method
Eun Seong Lee et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
Morphology control of polylactide microspheres enclosing irinotecan hydrochloride with polylactide based polymer surfactant for reduction of initial burst
Satoru Nishino et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2007)
The preparation of sustained release erythropoietin microparticle
Ming-Kung Yeh et al.
JOURNAL OF MICROENCAPSULATION (2007)
Effect of poly(lactide-co-glycolide) molecular weight on the release of dexamethasone sodium phosphate from microparticles
Saowanee Jaraswekin et al.
JOURNAL OF MICROENCAPSULATION (2007)
Pore closing and opening in biodegradable polymers and their effect on the controlled release of proteins
Jichao Kang et al.
MOLECULAR PHARMACEUTICS (2007)
Mathematical modeling and simulation of drug release from microspheres: Implications to drug delivery systems
Davis Yohanes Arifin et al.
ADVANCED DRUG DELIVERY REVIEWS (2006)
Key parameters affecting the initial release (burst) and encapsulation efficiency of peptide-containing poly(lactide-co-glycolide) microparticles
Xiaosong Luan et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2006)
PLA-microparticles formulated by means a thermoreversible gel able to modify protein encapsulation and release without being co-encapsulated
Eliana Leo et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2006)
Percolative transport and cluster diffusion near and below the percolation threshold of a porous polymeric matrix
Jayne E. Hastedt et al.
PHARMACEUTICAL RESEARCH (2006)
Modeling of aqueous transport in rigid porous matrices near the percolation threshold
Scott R. Ellis et al.
PHARMACEUTICAL RESEARCH (2006)
Release of anti-restenosis drugs from poly(ethylene oxide)-poly (DL-lactic-co-glycolic acid) nanoparticles
Miechel L. T. Zweers et al.
JOURNAL OF CONTROLLED RELEASE (2006)
The effect of process variables on the morphology and release characteristics of protein-loaded PLGA particles
Huang Yushu et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2006)
Response surface methodology to obtain β-estradiol biodegradable microspheres for long-term therapy of osteoporosis
Abdel-Azim Zaghloul et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2006)
Using TEM to couple transient protein distribution and release for PLGA microparticles for potential use as vaccine delivery vehicles
Aiying Zhao et al.
JOURNAL OF CONTROLLED RELEASE (2006)
The influence of surfactant on PLGA microsphere glass transition and water sorption: Remodeling the surface morphology to attenuate the burst release
C. Bouissou et al.
PHARMACEUTICAL RESEARCH (2006)
Influence of the primary emulsification procedure on the characteristics of small protein-loaded PLGA microparticles for antigen delivery
C. Wischke et al.
JOURNAL OF MICROENCAPSULATION (2006)
Modification of the tri-phasic drug release pattern of leuprolide acetate-loaded poly(lactide-co-glycolide) microparticles
Xiaosong Luan et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2006)
Sustained release of nanosized complexes of polyethylenimine and anti-TGF-β2 oligonucleotide improves the outcome of glaucoma surgery
Ana L. Gomes dos Santos et al.
JOURNAL OF CONTROLLED RELEASE (2006)
Elevated temperature accelerated release testing of PLGA microspheres
Banu S. Zolnik et al.
JOURNAL OF CONTROLLED RELEASE (2006)
How porosity and size affect the drug release mechanisms from PLIGA-based microparticles
D. Klose et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2006)
Biodegradable polymeric microspheres with open/closed pores for sustained release of human growth hormone
Hong Kee Kim et al.
JOURNAL OF CONTROLLED RELEASE (2006)
Effect of cyclodextrins on α-chymotrypsin stability and loading in PLGA microspheres upon S/O/W encapsulation
IJ Castellanos et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2006)
G-CSF loaded biodegradable PLGA nanoparticles prepared by a single oil-in-water emulsion method
SH Choi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2006)
Long-term and zero-order release of basic fibroblast growth factor from heparin-conjugated poly(L-lactide-co-glycolide) nanospheres and fibrin gel
O Jeon et al.
BIOMATERIALS (2006)
Controlled release of bioactive TGF-β1 from microspheres embedded within biodegradable hydrogels
AJ DeFail et al.
BIOMATERIALS (2006)
Pore size distributions of biodegradable polymer microparticles in aqueous environments measured by NMR cryoporometry
O Petrov et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2006)
In vitro and in vivo characterization of huperzine A loaded microspheres made from end-group uncapped poly(d,l-lactide acid) and poly(d,l-lactide-co-glycolide acid)
P Gao et al.
CHEMICAL & PHARMACEUTICAL BULLETIN (2006)
The influence of protein solubilisation, conformation and size on the burst release from poly(lactide-co-glycolide) microspheres
G Duncan et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Stability of bovine serum albumin complexed with PEG-poly(L-histidine) diblock copolymer in PLGA microspheres
JH Kim et al.
JOURNAL OF CONTROLLED RELEASE (2005)
NMR and confocal microscopy studies of the mechanisms of burst drug release from PLGA microspheres
A Messaritaki et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Plasticizing effect of water on poly(lactide-co-glycolide)
P Blasi et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Preparation and characterization of melittin-loaded poly (DL-lactic acid) or poly (DL-lactic-co-glycolic acid) microspheres made by the double emulsion method
F Cui et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Effect of porosity on the release kinetics of propafenone-loaded PEG-g-PLA nanoparticles
S Sant et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Baclofen-loaded microspheres in gel suspensions for intrathecal drug delivery: In vitro and in vivo evaluation
F Lagarce et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2005)
Triangular and Fibonacci number patterns driven by stress on core/shell microstructures
CR Li et al.
SCIENCE (2005)
Influence of the drug compatibility with polymer solution on the release kinetics of electrospun fiber formulation
J Zeng et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Impurity formation studies with peptide-loaded polymeric microspheres. Part I. In vivo evaluation
SB Murty et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2005)
Impurity formation studies with peptide-loaded polymeric microspheres. Part II. In vitro evaluation
SB Murty et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2005)
PEGylated insulin in PLGA microparticles.: In vivo and in vivo analysis
KD Hinds et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Optimizing double emulsion process to decrease the burst release of protein from biodegradable polymer microspheres
JX Zhang et al.
JOURNAL OF MICROENCAPSULATION (2005)
Comparative study of DNA encapsulation into PLGA microparticles using modified double emulsion methods and spray drying techniques
CG Oster et al.
JOURNAL OF MICROENCAPSULATION (2005)
Controlled release from bioerodible polymers: effect of drug type and polymer composition
A Frank et al.
JOURNAL OF CONTROLLED RELEASE (2005)
Bulk and surface modifications of polylactide
SG Wang et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2005)
Differential scanning calorimetry study on thermal behaviors of freeze-dried poly(L-lactide) from dilute solutions
T Sasaki et al.
JOURNAL OF POLYMER SCIENCE PART B-POLYMER PHYSICS (2005)
Effect of the drug-excipient ratio in matrix-type-controlled release systems: Computer simulation study
R Villalobos et al.
DRUG DEVELOPMENT AND INDUSTRIAL PHARMACY (2005)
Uniform encapsulation of stable protein nanoparticles produced by spray freezing for the reduction of burst release
WT Leach et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2005)
Free volume and intrinsic microporosity in polymers
PM Budd et al.
JOURNAL OF MATERIALS CHEMISTRY (2005)
Effect of the size of biodegradable microparticles on drug release: experiment and theory
J Siepmann et al.
JOURNAL OF CONTROLLED RELEASE (2004)
Critical effect of freezing/freeze-drying on sustained release of FITC-dextran encapsulated within PLGA microspheres
TH Kim et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2004)
Microsphere size, precipitation kinetics and drug distribution control drug release from biodegradable polyanhydride microspheres
C Berkland et al.
JOURNAL OF CONTROLLED RELEASE (2004)
Relationship between encapsulated drug particle size and initial release of recombinant human growth hormone from biodegradable microspheres
HR Costantino et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2004)
Microparticle formation and its mechanism in single and double emulsion solvent evaporation
ID Rosca et al.
JOURNAL OF CONTROLLED RELEASE (2004)
Control of encapsulation efficiency and initial burst in polymeric microparticle systems
Y Yeo et al.
ARCHIVES OF PHARMACAL RESEARCH (2004)
Long-term delivery of ivermectin by use of poly(D,L-lactic-co-glycolic)acid microparticles in dogs
SL Clark et al.
AMERICAN JOURNAL OF VETERINARY RESEARCH (2004)
Mechanistic evaluation of the glucose-induced reduction in initial burst release of octreotide acetate from poly(D,L-lactide-co-glycolide) microspheres
J Wang et al.
BIOMATERIALS (2004)
A potential approach for decreasing the burst effect of protein from PLGA microspheres
K Fu et al.
JOURNAL OF PHARMACEUTICAL SCIENCES (2003)
PLG microsphere size controls drug release rate through several competing factors
C Berkland et al.
PHARMACEUTICAL RESEARCH (2003)
Determination of diffusion coefficient of a small hydrophobic probe in poly(lactide-co-glycolide) microparticles by laser scanning confocal microscopy
JC Kang et al.
MACROMOLECULES (2003)
Poly(d,l-lactide-co-glycolide) encapsulated poly(vinyl alcohol) hydrogel as a drug delivery system
TK Mandal et al.
PHARMACEUTICAL RESEARCH (2002)
Modifying the release of leuprolide from spray dried OED microparticles
R Alcock et al.
JOURNAL OF CONTROLLED RELEASE (2002)
Characterization of the initial burst release of a model peptide from poly(D,L-lactide-co-glycolide) microspheres
J Wang et al.
JOURNAL OF CONTROLLED RELEASE (2002)
Precise control of PLG microsphere size provides enhanced control of drug release rate
C Berkland et al.
JOURNAL OF CONTROLLED RELEASE (2002)
Localized delivery of paclitaxel in solid tumors from biodegradable chitin microparticle formulations
S Nsereko et al.
BIOMATERIALS (2002)
PLGA-based microparticles: elucidation of mechanisms and a new, simple mathematical model quantifying drug release
N Faisant et al.
EUROPEAN JOURNAL OF PHARMACEUTICAL SCIENCES (2002)
Investigation on preparation and protein release of biodegradable polymer microspheres as drug-delivery system
SB Zhou et al.
JOURNAL OF APPLIED POLYMER SCIENCE (2002)
Peptide acylation by poly(α-hydroxy esters)
A Lucke et al.
PHARMACEUTICAL RESEARCH (2002)
Characterization of polyanhydride microsphere degradation by DSC
M Sandor et al.
POLYMER (2002)
Effect of osmotic pressure in the solvent extraction phase on BSA release profile from PLGA microspheres
G Jiang et al.
PHARMACEUTICAL DEVELOPMENT AND TECHNOLOGY (2002)
On the importance and mechanisms of burst release in matrix-controlled drug delivery systems
X Huang et al.
JOURNAL OF CONTROLLED RELEASE (2001)
An investigation into the effects of residual water on the glass transition temperature of polylactide microspheres using modulated temperature DSC
N Passerini et al.
JOURNAL OF CONTROLLED RELEASE (2001)
Effect of preparation temperature on the characteristics and release profiles of PLGA microspheres containing protein fabricated by double-emulsion solvent extraction/evaporation method
YY Yang et al.
JOURNAL OF CONTROLLED RELEASE (2000)
Controlled release of macromolecules from PLA microspheres: using porous structure topology
T Ehtezazi et al.
JOURNAL OF CONTROLLED RELEASE (2000)
Hydrophobic ion pair formation between leuprolide and sodium oleate for sustained release from biodegradable polymeric microspheres
SH Choi et al.
INTERNATIONAL JOURNAL OF PHARMACEUTICS (2000)
Effect of preparation conditions on morphology and release profiles of biodegradable polymeric microspheres containing protein fabricated by double-emulsion method
YY Yang et al.
CHEMICAL ENGINEERING SCIENCE (2000)
Formation of peptide impurities in polyester matrices during implant manufacturing
A Rothen-Weinhold et al.
EUROPEAN JOURNAL OF PHARMACEUTICS AND BIOPHARMACEUTICS (2000)