Journal
ENVIRONMENTAL TECHNOLOGY
Volume 30, Issue 5, Pages 499-504Publisher
TAYLOR & FRANCIS LTD
DOI: 10.1080/09593330902788244
Keywords
microbial fuel cell; paper recycling wastewater; COD removal; solution conductivity; hydraulic retention time; influent wastewater strength
Categories
Funding
- Altoona Blair County Development Corporation
- Ben Franklin Technology Partners
- American Eagle Paper Mills
- NREL [RFH-7-77623-01]
- Water Environment Research Foundation
Ask authors/readers for more resources
Many industries are charged fees based on the organic loads in effluents. Therefore, it can be advantageous to reduce the wastewater strength prior to discharge. We investigated the use of microbial fuel cells (MFCs) to reduce the chemical oxygen demand (COD) of a paper-plant wastewater while at the same time producing electricity in a continuous flow system. At a hydraulic retention time (HRT) of six hours, COD removal using an unamended wastewater (506 mg/L COD) (organic loading rate, OLR = 2.0 kg COD/(m3 d)) was 262%, with a power density of 5.90.2 W/m3 (2107 mW/m2). This amount of power was similar to the maximum power density (5.20.4 W/m3) produced in fed-batch tests using a slightly lower strength wastewater in the same device (405 mg/L COD). Increasing the HRT to 25 h (OLR = 0.5 kg COD/(m3 d)) increased COD removal (412%) but substantially decreased power (2.80.3 W/m3). While wastewater strength affected removal rates, the solution conductivity (0.8 mS/cm) was primarily a factor in low power production. These results demonstrate that MFCs can be used to reduce organic loads in effluents at relatively short HRTs, while at the same time generating power.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available