Stabilization of arsenic-contaminated mine tailings using natural and calcined oyster shells

Natural oyster shells (NOS) and calcined oyster shells (COS) were used to immobilize arsenic (As) from contaminated mine tailings. In addition, a blend of Portland cement (PC)/cement kiln dust (CKD) was used as a stabilizing agent. The Korean Standard Test (KST) method (1 N HCl extraction) was used to evaluate the effectiveness of the treatment. The experimental results showed that COS effectively immobilized As in treated mine tailings. Specifically, an As concentration less than 1 mg L-1 was obtained following COS treatment at 25 and 30 wt%. However, all the samples subjected to NOS treatments failed the Korean warning standard of 1.2 mg L-1 after 28 days of curing. All of the COS-PC treatments were successful meeting the Korean warning standard after 7 days of curing. However, the PC-only treatment failed to meet the Korean warning standard. Similarly, the CKD-only treatment was failed to meet the Korean warning standard after 7 days of curing. However, the COS-CKD treatment showed that when the COS content was greater than 20 wt%, less than 1 mg L-1 of As leachability was obtained. Scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX) showed needle-like and torpedo-like Ca-As phases in the COS-treated samples suggesting that As was strongly associated with Ca and O. X-ray absorption near edge structure (XANES) analyses confirmed that As(V) was prevalent in the tailings and that there were no changes in As speciation following NOS or COS treatment.