Rockfall susceptibility zoning at a large scale: From geomorphological inventory to preliminary land use planning

Rockfall, up to several hundreds of cubic meters, is a frequent and rapid landslide which menaces extensive areas in mountainous territories. Rockfall susceptibility zoning map at a large scale (1:5000-1:25000) can be the first tool for land use planning in order to manage rockfall risk. A methodology allowing to analyze susceptibility in extensive areas with optimum cost/benefit relationship is needed. This work analyzes rockfall susceptibility in an extensive rocky mountain of the Principality of Andorra (Pyrenees Mountains), first on the rock slope and then on the exposed area located below. The rockfall record, obtained by means of geomorphological analysis, supplies the main data to analyze the susceptibility on the rock slope. An additional historical inventory verifies the accuracy of rockfall sizes recorded by means of the geomorphological analysis. According to the classification recommended by the Guidelines of joint Technical Committee, the density of rockfall features on the rock slope assesses susceptibility in four levels. Subsequently, susceptibility on exposed areas has been analyzed by means of reach probability of rock blocks analysis using empirical models. Data acquired from thirteen recent events, from 1999 to 2004, have been used to verify the accuracy of the two empirical models mainly used (reach angle and shadow angle). Five reach probability limits (1, 0.5, 0.25, 0.01, and 0) establish boundaries between susceptibility levels. The resulting rockfall susceptibility zoning map allows: (a) to identify land areas and human elements exposed to rockfalls and, (b) to establish several exposition levels. This map can be a useful and cost-effective tool for administrations responsible to manage natural risk in order to guide urban grow in extensive areas or decide upon work programs based on in-depth analysis (hazard and risk). (c) 2008 Elsevier B.V. All rights reserved.