Related references
Note: Only part of the references are listed.p-Type CuI Islands on TiO2 Electron Transport Layer for a Highly Efficient Planar-Perovskite Solar Cell with Negligible Hysteresis
Mahdi Malekshahi Byranvand et al.
ADVANCED ENERGY MATERIALS (2018)
High-Efficiency Low-Temperature ZnO Based Perovskite Solar Cells Based on Highly Polar, Nonwetting Self-Assembled Molecular Layers
Randi Azmi et al.
ADVANCED ENERGY MATERIALS (2018)
Donor-Acceptor Type Dopant-Free, Polymeric Hole Transport Material for Planar Perovskite Solar Cells (19.8%)
Guan-Woo Kim et al.
ADVANCED ENERGY MATERIALS (2018)
Stable High-Performance Perovskite Solar Cells via Grain Boundary Passivation
Tianqi Niu et al.
ADVANCED MATERIALS (2018)
Design and understanding of encapsulated perovskite solar cells to withstand temperature cycling
Rongrong Cheacharoen et al.
ENERGY & ENVIRONMENTAL SCIENCE (2018)
All-Inorganic CsPbI2Br Perovskite Solar Cells with High Efficiency Exceeding 13%
Chong Liu et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2018)
Toward Long-Term Stable and Highly Efficient Perovskite Solar Cells via Effective Charge Transporting Materials
Yanbo Wang et al.
ADVANCED ENERGY MATERIALS (2018)
Extending the Continuous Operating Lifetime of Perovskite Solar Cells with a Molybdenum Disulfide Hole Extraction Interlayer
George Kakavelakis et al.
ADVANCED ENERGY MATERIALS (2018)
Enhanced stability and optoelectronic properties of MAPbl(3) films by a cationic surface-active agent for perovskite solar cells
He Zhao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
Green-solvent processable semiconducting polymers applicable in additive-free perovskite and polymer solar cells: molecular weights, photovoltaic performance, and thermal stability
Junwoo Lee et al.
JOURNAL OF MATERIALS CHEMISTRY A (2018)
4-tert-Butylpyridine Free Hole Transport Materials for Efficient Perovskite Solar Cells: A New Strategy to Enhance the Environmental and Thermal Stability
Jinbao Zhang et al.
ACS ENERGY LETTERS (2018)
Aquointermediate Assisted Highly Orientated Perovskite Thin Films toward Thermally Stable and Efficient Solar Cells
Wenzhe Li et al.
ADVANCED ENERGY MATERIALS (2017)
Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells
Qi Jiang et al.
NATURE ENERGY (2017)
Engineering interface structures between lead halide perovskite and copper phthalocyanine for efficient and stable perovskite solar cells
Y. C. Kim et al.
ENERGY & ENVIRONMENTAL SCIENCE (2017)
Charge Injection Mechanism at Heterointerfaces in CH3NH3PbI3 Perovskite Solar Cells Revealed by Simultaneous Time-Resolved Photoluminescence and Photocurrent Measurements
Taketo Handa et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2017)
Green-Solvent-Processable, Dopant-Free Hole-Transporting Materials for Robust and Efficient Perovskite Solar Cells
Junwoo Lee et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2017)
Potassium Incorporation for Enhanced Performance and Stability of Fully Inorganic Cesium Lead Halide Perovskite Solar Cells
Jae Keun Nam et al.
NANO LETTERS (2017)
Efficient and stable solution-processed planar perovskite solar cells via contact passivation
Hairen Tan et al.
SCIENCE (2017)
Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells
Woon Seok Yang et al.
SCIENCE (2017)
Colloidally prepared La-doped BaSnO3 electrodes for efficient, photostable perovskite solar cells
Seong Sik Shin et al.
SCIENCE (2017)
One-Year stable perovskite solar cells by 2D/3D interface engineering
G. Grancini et al.
NATURE COMMUNICATIONS (2017)
Enhancement of thermal stability for perovskite solar cells through cesium doping
Guangda Niu et al.
RSC ADVANCES (2017)
Highly efficient and stable low-temperature processed ZnO solar cells with triple cation perovskite absorber
Jiaxing Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Low-temperature solution-processed NiOx films for air-stable perovskite solar cells
Jie Cao et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Interface engineering in planar perovskite solar cells: energy level alignment, perovskite morphology control and high performance achievement
Guang Yang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Inducing swift nucleation morphology control for efficient planar perovskite solar cells by hot-air quenching
Seulki Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2017)
Graphene Interface Engineering for Perovskite Solar Modules: 12.6% Power Conversion Efficiency over 50 cm2 Active Area
Antonio Agresti et al.
ACS ENERGY LETTERS (2017)
Systematically Optimized Bilayered Electron Transport Layer for Highly Efficient Planar Perovskite Solar Cells (η=21.1%)
Seulki Song et al.
ACS ENERGY LETTERS (2017)
PEROVSKITE SOLAR CELLS Stability lies at interfaces
Monica Lira-Cantu
NATURE ENERGY (2017)
Defect passivation in hybrid perovskite solar cells using quaternary ammonium halide anions and cations
Xiaopeng Zheng et al.
NATURE ENERGY (2017)
Planar-Structure Perovskite Solar Cells with Efficiency beyond 21%
Qi Jiang et al.
ADVANCED MATERIALS (2017)
Morphological Control of Donor/Acceptor Interfaces in All-Polymer Solar Cells Using a Pentafluorobenzene-Based Additive
Hong Il Kim et al.
CHEMISTRY OF MATERIALS (2017)
Thermally Stable MAPbI3 Perovskite Solar Cells with Efficiency of 19.19% and Area over 1 cm2 achieved by Additive Engineering
Yongzhen Wu et al.
ADVANCED MATERIALS (2017)
Effect of Selective Contacts on the Thermal Stability of Perovskite Solar Cells
Xing Zhao et al.
ACS APPLIED MATERIALS & INTERFACES (2017)
Well-Defined Nanostructured, Single Crystalline TiO2 Electron Transport Layer for Efficient Planar Perovskite Solar Cells
Jongmin Choi et al.
ACS NANO (2016)
Surface optimization to eliminate hysteresis for record efficiency planar perovskite solar cells
Dong Yang et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Enhanced UV-light stability of planar heterojunction perovskite solar cells with caesium bromide interface modification
Wenzhe Li et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Dopant-free polymeric hole transport materials for highly efficient and stable perovskite solar cells
Guan-Woo Kim et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Highly efficient and stable planar perovskite solar cells by solution-processed tin oxide
Elham Halvani Anaraki et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Cesium-containing triple cation perovskite solar cells: improved stability, reproducibility and high efficiency
Michael Saliba et al.
ENERGY & ENVIRONMENTAL SCIENCE (2016)
Improving efficiency and stability of perovskite solar cells with photocurable fluoropolymers
Federico Bella et al.
SCIENCE (2016)
Incorporation of rubidium cations into perovskite solar cells improves photovoltaic performance
Michael Saliba et al.
SCIENCE (2016)
Enhanced electronic properties in mesoporous TiO2 via lithium doping for high-efficiency perovskite solar cells
Fabrizio Giordano et al.
NATURE COMMUNICATIONS (2016)
Improved photovoltaic performance of mesoporous perovskite solar cells with hydrogenated TiO2: prolonged photoelectron lifetime and high separation efficiency of photoinduced charge
Ting Su et al.
RSC ADVANCES (2016)
Deposition of a hydrophilic nanocomposite-based coating on silicone hydrogel through a laser process to minimize UV exposure and bacterial contamination
Guobang Huang et al.
RSC ADVANCES (2016)
Enhancing the planar heterojunction perovskite solar cell performance through tuning the precursor ratio
Jingjing Chang et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Highly efficient low temperature solution processable planar type CH3NH3PbI3 perovskite flexible solar cells
Jin Hyuck Heo et al.
JOURNAL OF MATERIALS CHEMISTRY A (2016)
Interfacial electron accumulation for efficient homo-junction perovskite solar cells
Seulki Song et al.
NANO ENERGY (2016)
Perovskite solar cells with 18.21% efficiency and area over 1 cm2 fabricated by heterojunction engineering
Yongzhen Wu et al.
NATURE ENERGY (2016)
Highly efficient planar perovskite solar cells through band alignment engineering
Juan Pablo Correa Baena et al.
ENERGY & ENVIRONMENTAL SCIENCE (2015)
Insight into Perovskite Solar Cells Based on SnO2 Compact Electron-Selective Layer
Qingshun Dong et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2015)
Low-Temperature Solution-Processed Tin Oxide as an Alternative Electron Transporting Layer for Efficient Perovskite Solar Cells
Weijun Ke et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2015)
Compositional engineering of perovskite materials for high-performance solar cells
Nam Joong Jeon et al.
NATURE (2015)
High-performance photovoltaic perovskite layers fabricated through intramolecular exchange
Woon Seok Yang et al.
SCIENCE (2015)
Perovskite-fullerene hybrid materials suppress hysteresis in planar diodese
Jixian Xu et al.
NATURE COMMUNICATIONS (2015)
Intrinsic Thermal Instability of Methylammonium Lead Trihalide Perovskite
Bert Conings et al.
ADVANCED ENERGY MATERIALS (2015)
Low-temperature SnO2-based electron selective contact for efficient and stable perovskite solar cells
Jiaxing Song et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Low-temperature, solution processed metal sulfide as an electron transport layer for efficient planar perovskite solar cells
Jiang Liu et al.
JOURNAL OF MATERIALS CHEMISTRY A (2015)
Integrated Perovskite/Bulk-Heterojunction toward Efficient Solar Cells
Yongsheng Liu et al.
NANO LETTERS (2015)
Bio-green synthesis of Ni-doped tin oxide nanoparticles and its influence on gas sensing properties
Ketan P. Gattu et al.
RSC ADVANCES (2015)
Materials Processing Routes to Trap-Free Halide Perovskites
Andrei Buin et al.
NANO LETTERS (2014)
Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells
Nam Joong Jeon et al.
NATURE MATERIALS (2014)
Perovskite solar cells with a planar heterojunction structure prepared using room-temperature solution processing techniques
Dianyi Liu et al.
NATURE PHOTONICS (2014)
Origin and elimination of photocurrent hysteresis by fullerene passivation in CH3NH3PbI3 planar heterojunction solar cells
Yuchuan Shao et al.
NATURE COMMUNICATIONS (2014)
Conjugated Polymeric Zwitterions as Efficient Interlayers in Organic Solar Cells
Feng Liu et al.
ADVANCED MATERIALS (2013)
Flexible, low-temperature, solution processed ZnO-based perovskite solid state solar cells
Mulmudi Hemant Kumar et al.
CHEMICAL COMMUNICATIONS (2013)
Depleted hole conductor-free lead halide iodide heterojunction solar cells
Waleed Abu Laban et al.
ENERGY & ENVIRONMENTAL SCIENCE (2013)
Sequential deposition as a route to high-performance perovskite-sensitized solar cells
Julian Burschka et al.
NATURE (2013)
Efficient inorganic-organic hybrid heterojunction solar cells containing perovskite compound and polymeric hole conductors
Jin Hyuck Heo et al.
NATURE PHOTONICS (2013)
Highly Efficient, Inverted Polymer Solar Cells with Indium Tin Oxide Modified with Solution-Processed Zwitterions as the Transparent Cathode
Kuan Sun et al.
ACS APPLIED MATERIALS & INTERFACES (2012)
Identifying a Threshold Impurity Level for Organic Solar Cells: Enhanced First-Order Recombination Via Well-Defined PC84BM Traps in Organic Bulk Heterojunction Solar Cells
Sarah R. Cowan et al.
ADVANCED FUNCTIONAL MATERIALS (2011)
Conjugated Zwitterionic Polyelectrolyte as the Charge Injection Layer for High-Performance Polymer Light-Emitting Diodes
Junfeng Fang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2011)
Cation effect on the inorganic-organic layered structure of pyrazole-4-sulfonate networks and inhibitory effects on copper corrosion
Isurika R. Fernando et al.
NEW JOURNAL OF CHEMISTRY (2010)
Modification of the Surface Properties of Indium Tin Oxide with Benzylphosphonic Acids: A Joint Experimental and Theoretical Study
Peter J. Hotchkiss et al.
ADVANCED MATERIALS (2009)
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Akihiro Kojima et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Self-assembled Electroactive Phosphonic Acids on ITO: Maximizing Hole-Injection in Polymer Light-Emitting Diodes
Julie A. Bardecker et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Surface coverage and structure of mixed DNA/alkylthiol monolayers on gold: Characterization by XPS, NEXAFS, and fluorescence intensity measurements
Chi-Ying Lee et al.
ANALYTICAL CHEMISTRY (2006)
Using self-assembling dipole molecules to improve hole injection in conjugated polymers
S Khodabakhsh et al.
ADVANCED FUNCTIONAL MATERIALS (2004)
The zwitterion effect in high-conductivity polyelectrolyte materials
C Tiyapiboonchaiya et al.
NATURE MATERIALS (2004)
Mott-Schottky analysis of nanoporous semiconductor electrodes in dielectric state deposited on SnO2(F) conducting substrates
F Fabregat-Santiago et al.
JOURNAL OF THE ELECTROCHEMICAL SOCIETY (2003)
Molecular orientation and grafting density in semifluorinated self-assembled monolayers of mono-, di-, and trichloro silanes on silica substrates
J Genzer et al.
LANGMUIR (2002)
XPS study of the L-CVD deposited SnO2 thin films exposed to oxygen and hydrogen
J Szuber et al.
THIN SOLID FILMS (2001)
Share Paper
