The Effects of Predrying Treatments and Different Drying Methods on Phytochemical Compound Retention and Drying Characteristics of Moringa Leaves ( Moringa oleifera Lam.)

The most appropriate maturity stage of Moringa oleifera leaves was selected for drying based on phytochemical content, including quercetin and kaempferol. Desorption isotherms were developed and were best fit by the modified Henderson model. Prior to drying, samples were left untreated, blanched in boiling water, and blanched in NaHCO3/MgO. The leaves were dried by hot air tray drying (TD) and heat pump-dehumidified drying air (HPD) at air temperatures of 40, 50, and 60 degrees C. Alternatively, leaves were subject to microwave drying (MWD) at 150, 450, and 900W and to freeze drying (FD). The moisture versus time data were fitted to five drying models. In general, a three-parameter model gave the best fit. The drying constant was related to the drying temperature or microwave power using an Arrhenius model. Effective moisture diffusivity (D-eff) increased with higher drying temperature, higher microwave power, or blanching treatments. Structural changes in the leaves after drying and upon rehydration were observed by scanning electron microscopy (SEM). Leaves blanched and dried using HPD at 50 degrees C and fresh and dried using FD showed a partial breakdown of the tissue structure upon rehydration. HPD and blanching reduced the drying time by 8.3% and increased quercetin and kaempferol levels by 42.1 and 51.4%, respectively, compared to TD at 50 degrees C. MWD provided the quickest drying followed by HPD and TD, respectively. HPD drying of M. oleifera after blanching resulted in relatively greater quality compared to TD and MWD.