Journal
DESALINATION
Volume 300, Issue -, Pages 24-31Publisher
ELSEVIER
DOI: 10.1016/j.desal.2012.05.036
Keywords
Pervaporation; Sodium alginate; Clinoptilolite; Zeolite 4A
Categories
Ask authors/readers for more resources
In this study, synthetic (zeolite 4A) and natural zeolite (clinoptilolite-CL) filled sodium alginate (NaAlg) membranes were prepared with solution-casting method. Synthetic zeolite incorporated membranes were cross-linked with glutaraldehyde (GA). The morphologies of the membranes were studied using scanning electron microscopy (SEM). The separation properties of the zeolite filled alginate membranes were characterized by pervaporation of ethanol-water mixtures. The effects of zeolite type, zeolite loading, zeolite particle size and feed composition on pervaporation performance were studied. Both flux and selectivity increased with the increasing of zeolite content in the membrane matrix. As increasing the water concentration in the feed mixtures flux values increased but selectivity decreased. According to the performance values, it was seen that the synthetic 4A zeolite was more proper than natural CL zeolite for the NaAlg matrix. However, results were not sufficient for using these membranes commercially. In order to increase PV performance 'priming' procedure was applied to 10 wt.% of 4A loaded NaAlg membrane. It was seen that both flux and selectivity enhanced owing to the use of this procedure. Selectivity of modified membrane was eight times higher than the 10 wt.% 4A loaded membrane. (c) 2012 Elsevier B.V. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available