4.7 Article

Separation of aqueous salt solution by pervaporation through hybrid organic-inorganic membrane: Effect of operating conditions

Journal

DESALINATION
Volume 273, Issue 1, Pages 220-225

Publisher

ELSEVIER SCIENCE BV
DOI: 10.1016/j.desal.2010.10.026

Keywords

Pervaporation; Hybrid organic-inorganic membranes; PVA; Salt rejection

Funding

  1. CSIRO Water for Healthy Country National Research Flagship

Ask authors/readers for more resources

Hybrid polymer-inorganic membranes were prepared by crosslinking poly(vinyl alcohol) (PVA), maleic acid (MA) and silica via an aqueous sol-gel route. Membrane characterisation results revealed silica nanoparticles (<10 nm) were well dispersed in the polymer matrix and significantly reduced swelling of the membrane. The membranes were tested for pervaporation separation of aqueous salt solution with NaCl concentrations of 0.2-5.0 wt% at temperatures 20-65 degrees C, feed flowrates 30-150 mL/min and permeate pressures 2-40 Torr. The salt rejection remained high (up to 99.9%) under all operating conditions. A high water flux of 11.7 kg/m(2) h could be achieved at a feed temperature of 65 degrees C and a vacuum of 6 Torr. The effect of operating conditions on water flux is discussed in relation to diffusion coefficients of water and fundamental transport mechanism through the membrane. The activation energy for water permeation was found to vary from 23.8 to 20.1 kJ/kmol when the salt concentration in the feed was increased from 0.2 to 5.0 wt%. Crown Copyright (C) 2010 Published by Elsevier B.V. All rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.7
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available