Journal
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
Volume 31, Issue 10, Pages 1001-1005Publisher
JOURNAL MATER SCI TECHNOL
DOI: 10.1016/j.jmst.2015.08.007
Keywords
Selective laser melting; In situ Ti-TiB composite; Powder shape; Density; Mechanical properties
Funding
- Australian Research Council [DP110101653]
- European Commission (BioTiNet-ITN G.A.) [264635]
- Deutsche Forschungsgemeinschaft [SFB/Transregio 79]
Ask authors/readers for more resources
This work studied the preparation of starting powder mixture influenced by milling time and its effect on the particle morphology (especially the shape) and, consequently, density and compression properties of in situ Ti-TiB composite materials produced by selective laser melting (SLM) technology. Starting powder composite system was prepared by mixing 95 wt% commercially pure titanium (CP-Ti) and 5 wt% titanium diboride (TiB2) powders and subsequently milled for two different times (i.e. 2 h and 4 h). The milled powder mixtures after 2 h and 4 h show nearly spherical and irregular shape, respectively. Subsequently, the resultant Ti-5 wt% TiB2 powder mixtures were used for SLM processing. Scanning electron microscopy image of the SLM-processed Ti-TiB composite samples show needle-shape TiB phase distributed across the Ti matrix, which is the product of an in-situ chemical reaction between Ti and TiB2 during SLM. The Ti-TiB composite samples prepared from 2 h and 4 h milled Ti-TiB2 powders show different relative densities of 99.5% and 95.1%, respectively. Also, the compression properties such as ultimate strength and compression strain for the 99.5% dense composite samples is 1421 MPa and 17.8%, respectively, which are superior to those (883 MPa and 5.5%, respectively) for the 95.1% dense sample. The results indicate that once Ti and TiB2 powders are connected firmly to each other and powder mixture of nearly spherical shape is obtained, there is no additional benefit in increasing the milling time and, instead, it has a negative effect on the density (i.e. increasing porosity level) of the Ti-TiB composite materials and their mechanical properties. Copyright (C) 2015, The editorial office of Journal of Materials Science & Technology. Published by Elsevier Limited. All rights reserved.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available