Static aeroelastic analysis of very flexible wings based on non-planar vortex lattice method

A rapid and efficient method for static aeroelastic analysis of a flexible slender wing when considering the structural geometric nonlinearity has been developed in this paper. A non-planar vortex lattice method herein is used to compute the non-planar aerodynamics of flexible wings with large deformation. The finite element method is introduced for structural nonlinear statics analysis. The surface spline method is used for structure/aerodynamics coupling. The static aeroelastic characteristics of the wind tunnel model of a flexible wing are studied by the nonlinear method presented, and the nonlinear method is also evaluated by comparing the results with those obtained from two other methods and the wind tunnel test. The results indicate that the traditional linear method of static aeroelastic analysis is not applicable for cases with large deformation because it produces results that are not realistic. However, the nonlinear methodology, which involves combining the structure finite element method with the non-planar vortex lattice method, could be used to solve the aeroelastic deformation with considerable accuracy, which is in fair agreement with the test results. Moreover, the nonlinear finite element method could consider complex structures. The non-planar vortex lattice method has advantages in both the computational accuracy and efficiency. Consequently, the nonlinear method presented is suitable for the rapid and efficient analysis requirements of engineering practice. It could be used in the preliminary stage and also in the detailed stage of aircraft design. (C) 2013 Production and hosting by Elsevier Ltd. on behalf of CSAA & BUAA.