6:2 Fluorotelomer alcohol aerobic biotransformation in activated sludge from two domestic wastewater treatment plants

6:2 Fluorotelomer alcohol [6:2 FTOH, F(CF2)(6)CH2CH2OH] is a major basic chemical being used to manufacture FTOH-based products. After the end of use, 6:2 FTOH-based products may be released to domestic wastewater treatment plants (WWTPs) as a first major environmental entry point. Activated sludge collected from two WWTPs was dosed with 6:2 FTOH to investigate its biotransformation rate and to identify major transformation products. The volatile 5:2 sFTOH [F(CF2)(5)CH(OH)CH3] is the most abundant transformation product and accounted for an average of 40 mol% of initially dosed 6:2 FTOH after two months of incubation with activated sludge, with 30 mol% detected in the headspace. PFPeA [F(CF2)(4)COOH] averaged 4.4 mol% after two months, 2.4-7 times lower than that in sediment and soils. The much lower level of PFPeA formed in activated sludge compared with soil indicates that microbial populations in activated sludge may lack enzymes or suitable environment conditions to promote rapid 5:2 sFTOH decarboxylation to form PFPeA, resulting in more 5:2 sFTOH partitioned to the headspace. PFHxA [F(CF2)(5)COOH] and 5:3 [F(CF2)(5)CH2CH2COOH] acid are major non-volatile transformation products in activated sludge. For example, PFHxA averaged 11 mol% after two months, which is about 30% higher compared with sediment and soils, suggesting that microbes in WWTPs may utilize similar pathways as that in sediment and soils to convert 5:2 sFTOH to PFHxA. 5:3 Acid averaged 14 mol% after two months, comparable to that in soils and slightly lower than in sediment, further confirming that 5:3 acid is a unique product of 6:2 FTOH biotransformation in the environment. (c) 2013 Elsevier Ltd. All rights reserved.