Related references
Note: Only part of the references are listed.For the Bright Future-Bulk Heterojunction Polymer Solar Cells with Power Conversion Efficiency of 7.4%
Yongye Liang et al.
ADVANCED MATERIALS (2010)
Advanced materials and processes for polymer solar cell devices
Martin Helgesen et al.
JOURNAL OF MATERIALS CHEMISTRY (2010)
Vertical Stratification and Interfacial Structure in P3HT:PCBM Organic Solar Cells
Bofei Xue et al.
JOURNAL OF PHYSICAL CHEMISTRY C (2010)
Dependence of Charge Separation Efficiency on Film Microstructure in Poly(3-hexylthiophene-2,5-diyl): [6,6]-Phenyl-C61 Butyric Acid Methyl Ester Blend Films
Panagiotis E. Keivanidis et al.
JOURNAL OF PHYSICAL CHEMISTRY LETTERS (2010)
Indene-C60 Bisadduct: A New Acceptor for High-Performance Polymer Solar Cells
Youjun He et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2010)
High-performance polymer semiconducting heterostructure devices by nitrene-mediated photocrosslinking of alkyl side chains
Rui-Qi Png et al.
NATURE MATERIALS (2010)
Bimolecular Crystals of Fullerenes in Conjugated Polymers and the Implications of Molecular Mixing for Solar Cells
A. C. Mayer et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Electron Trapping in Higher Adduct Fullerene-Based Solar Cells
Martijn Lenes et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Material Solubility-Photovoltaic Performance Relationship in the Design of Novel Fullerene Derivatives for Bulk Heterojunction Solar Cells
Pavel A. Troshin et al.
ADVANCED FUNCTIONAL MATERIALS (2009)
Device Performance of APFO-3/PCBM Solar Cells with Controlled Morphology
Cecilia M. Bjorstrom Svanstrom et al.
ADVANCED MATERIALS (2009)
Semiconducting Thienothiophene Copolymers: Design, Synthesis, Morphology, and Performance in Thin-Film Organic Transistors
Iain McCulloch et al.
ADVANCED MATERIALS (2009)
Substrate-dependent interface composition and charge transport in films for organic photovoltaics
David S. Germack et al.
APPLIED PHYSICS LETTERS (2009)
Synthesis of Conjugated Polymers for Organic Solar Cell Applications
Yen-Ju Cheng et al.
CHEMICAL REVIEWS (2009)
A Simple and Effective Way of Achieving Highly Efficient and Thermally Stable Bulk-Heterojunction Polymer Solar Cells Using Amorphous Fullerene Derivatives as Electron Acceptor
Yong Zhang et al.
CHEMISTRY OF MATERIALS (2009)
Charge separation and recombination in self-organizing nanostructured donor-acceptor block copolymer films
Simon King et al.
JOURNAL OF MATERIALS CHEMISTRY (2009)
Highly Efficient Solar Cell Polymers Developed via Fine-Tuning of Structural and Electronic Properties
Yongye Liang et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2009)
Influence of Molecular Weight Distribution on the Gelation of P3HT and Its Impact on the Photovoltaic Performance
Markus Koppe et al.
MACROMOLECULES (2009)
Three-Dimensional Nanoscale Organization of Bulk Heterojunction Polymer Solar Cells
Svetlana S. van Bavel et al.
NANO LETTERS (2009)
Tuning the Properties of Polymer Bulk Heterojunction Solar Cells by Adjusting Fullerene Size to Control Intercalation
Nichole C. Cates et al.
NANO LETTERS (2009)
A Bicontinuous Double Gyroid Hybrid Solar Cell
Edward J. W. Crossland et al.
NANO LETTERS (2009)
On the origin of the open-circuit voltage of polymer-fullerene solar cells
Koen Vandewal et al.
NATURE MATERIALS (2009)
Endohedral fullerenes for organic photovoltaic devices
Russel B. Ross et al.
NATURE MATERIALS (2009)
Advances in molecular design and synthesis of regioregular polythiophenes
Itaru Osaka et al.
ACCOUNTS OF CHEMICAL RESEARCH (2008)
Free Energy Control of Charge Photogeneration in Polythiophene/Fullerene Solar Cells: The Influence of Thermal Annealing on P3HT/PCBM Blends
Tracey M. Clarke et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
The effect of poly(3-hexylthiophene) molecular weight on charge transport and the performance of polymer:fullerene solar cells
Amy M. Ballantyne et al.
ADVANCED FUNCTIONAL MATERIALS (2008)
Fullerene bisadducts for enhanced open-circuit voltages and efficiencies in polymer solar cells
Martijn Lenes et al.
ADVANCED MATERIALS (2008)
Self-organized buffer layers in organic solar cells
Qingshuo Wei et al.
ADVANCED MATERIALS (2008)
Binary organic photovoltaic blends:: A simple rationale for optimum compositions
Christian Mueller et al.
ADVANCED MATERIALS (2008)
Compositional and electric field dependence of the dissociation of charge transfer excitons in alternating polyfluorene copolymer/fullerene blends
Dirk Veldman et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Processing additives for improved efficiency from bulk heterojunction solar cells
Jae Kwan Lee et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
The Influence of Poly(3-hexylthiophene) Regioregularity on Fullerene-Composite Solar Cell Performance
Claire H. Woo et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2008)
Morphology evolution via self-organization and lateral and vertical diffusion in polymer: fullerene solar cell blends
Mariano Campoy-Quiles et al.
NATURE MATERIALS (2008)
p-Type semiconducting nickel oxide as an efficiency-enhancing anode interfacial layer in polymer bulk-heterojunction solar cells
Michael D. Irwin et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
Ultrafast electron transfer and decay dynamics in a small band gap bulk heterojunction material
In-Wook Hwang et al.
ADVANCED MATERIALS (2007)
Charge transfer excitons in bulk heterojunctions of a polyfluorene copolymer and a fullerene derivative
Maria Antonietta Loi et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Effect of the molecular weight of poly(3-hexylthiophene) on the morphology and performance of polymer bulk heterojunction solar cells
Wanli Ma et al.
MACROMOLECULAR RAPID COMMUNICATIONS (2007)
Efficiency enhancement in low-bandgap polymer solar cells by processing with alkane dithiols
J. Peet et al.
NATURE MATERIALS (2007)
Polyterthiophenes as donors for polymer solar cells
Markus Koppe et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Increasing the open circuit voltage of bulk-heterojunction solar cells by raising the LUMO level of the acceptor
Floris B. Kooistra et al.
ORGANIC LETTERS (2007)
Formation of a ground-state charge-transfer complex in polyfluorene/[6,6]-phenyl-C61 butyric acid methyl ester (PCBM) blend films and its role in the function of polymer/PCBM solar cells
Jessica J. Benson-Smith et al.
ADVANCED FUNCTIONAL MATERIALS (2007)
Hybrid polymer-metal oxide thin films for photovoltaic applications
Johann Boucle et al.
JOURNAL OF MATERIALS CHEMISTRY (2007)
Regioregular poly(3-hexyl) selenophene: a low band gap organic hole transporting polymer
Martin Heeney et al.
CHEMICAL COMMUNICATIONS (2007)
Method for increasing the photoconductive response in conjugated polymer/fullerene composites
J. Peet et al.
APPLIED PHYSICS LETTERS (2006)
Molecular-weight dependence of interchain polaron delocalization and exciton bandwidth in high-mobility conjugated polymers
Jui-Fen Chang et al.
PHYSICAL REVIEW B (2006)
The formation of crystalline P3HT fibrils upon annealing of a PCBM:P3HT bulk heterojunction
Tom J. Savenije et al.
THIN SOLID FILMS (2006)
Origin of the enhanced performance in poly(3-hexylthiophene):: [6,6]-phenyl C61-butyric acid methyl ester solar cells upon slow drying of the active layer
Valentin D. Mihailetchi et al.
APPLIED PHYSICS LETTERS (2006)
New C84 derivative and its application in a bulk heterojunction solar cell
Floris B. Kooistra et al.
CHEMISTRY OF MATERIALS (2006)
Influence of solvent mixing on the morphology and performance of solar cells based on polyfluorene copolymer/fullerene blends
FL Zhang et al.
ADVANCED FUNCTIONAL MATERIALS (2006)
Charge transport and photocurrent generation in poly (3-hexylthiophene): Methanofullerene bulk-heterojunction solar cells
VD Mihailetchi et al.
ADVANCED FUNCTIONAL MATERIALS (2006)
Design rules for donors in bulk-heterojunction solar cells -: Towards 10 % energy-conversion efficiency
MC Scharber et al.
ADVANCED MATERIALS (2006)
A strong regioregularity effect in self-organizing conjugated polymer films and high-efficiency polythiophene: fullerene solar cells
Y Kim et al.
NATURE MATERIALS (2006)
Mixed donor-acceptor molecular heterojunctions for photovoltaic applications. II. Device performance
JG Xue et al.
JOURNAL OF APPLIED PHYSICS (2005)
High-efficiency solution processable polymer photovoltaic cells by self-organization of polymer blends
G Li et al.
NATURE MATERIALS (2005)
Thermally stable, efficient polymer solar cells with nanoscale control of the interpenetrating network morphology
WL Ma et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
Correlation between structural and optical properties of composite polymer/fullerene films for organic solar cells
T Erb et al.
ADVANCED FUNCTIONAL MATERIALS (2005)
Dependence of regioregular poly(3-hexylthiophene) film morphology and field-effect mobility on molecular weight
RJ Kline et al.
MACROMOLECULES (2005)
Influence of the molecular weight of poly(3-hexylthiophene) on the performance of bulk heterojunction solar cells
P Schilinsky et al.
CHEMISTRY OF MATERIALS (2005)
Nanoscale morphology of high-performance polymer solar cells
XN Yang et al.
NANO LETTERS (2005)
Influence of molecular design on the field-effect transistor characteristics of terthiophene polymers
I McCulloch et al.
CHEMISTRY OF MATERIALS (2005)
Nanoscale morphology of conjugated polymer/fullerene-based bulk-heterojunction solar cells
H Hoppe et al.
ADVANCED FUNCTIONAL MATERIALS (2004)
Influence of nanomorphology on the photovoltaic action of polymer-fullerene composites
D Chirvase et al.
NANOTECHNOLOGY (2004)
Effect of molecular weight and annealing of poly (3-hexylthiophene)s on the performance of organic field-effect transistors
A Zen et al.
ADVANCED FUNCTIONAL MATERIALS (2004)
Lamination method for the study of interfaces in polymeric thin film transistors
ML Chabinyc et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2004)
Influence of molecular architecture and intermixing on the photovoltaic, morphological and spectroscopic properties of CuPc-C60 heterojunctions
S Heutz et al.
SOLAR ENERGY MATERIALS AND SOLAR CELLS (2004)
Computational reinvestigation of the bithiophene torsion potential
G Raos et al.
CHEMICAL PHYSICS LETTERS (2003)
Disclosure of the nanostructure of MDMO-PPV:PCBM bulk hetero-junction organic solar cells by a combination of SPM and TEM
T Martens et al.
SYNTHETIC METALS (2003)
Synthesis and spectroscopic properties of a series of β-blocked long oligothiophenes up to the 96-mer:: Revaluation of effective conjugation length
T Izumi et al.
JOURNAL OF THE AMERICAN CHEMICAL SOCIETY (2003)
Efficient methano[70]fullerene/MDMO-PPV bulk heterojunction photovoltaic cells
MM Wienk et al.
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION (2003)
Influence of the solvent on the crystal structure of PCBM and the efficiency of MDMO-PPV : PCBM 'plastic' solar cells
MT Rispens et al.
CHEMICAL COMMUNICATIONS (2003)
Vertically segregated polymer-blend photovoltaic thin-film structures through surface-mediated solution processing
AC Arias et al.
APPLIED PHYSICS LETTERS (2002)
Torsional barrier, ionization potential, and electron affinity of biphenyl - A theoretical study
S Arulmozhiraja et al.
JOURNAL OF CHEMICAL PHYSICS (2001)