Identification of metal cations, metal complexes, and anions by electrospray mass spectrometry in the negative ion mode

Pneumatically assisted electrospray mass spectrometry (ES-MS) is used in the negative ion mode for aqueous metal (M) solutions in an excess of hydrochloric or nitric acid, where the major anion X = Cl- or NO3-. A collision energy of similar to 20 eV removes anion-solvent clusters for most elements and leaves negative complex ions of the general form (Mn+Yn+1)(-). Complexation with anions prevents charge reduction reactions at least to n = 3, even in cases where the third ionization energy of M greatly exceeds the first ionization energy of the solvent. These negative ions thus preserve the charge state of the metal cation from the solution and allow identification of both cations and anions in a single set of electrospray conditions. Cations such as Fe3+ or Cu2+ that have a lower oxidation state in solution produce a distribution of negative ions, each with a single negative charge overall; e.g., an Fe3+ solution produces both (FeX4-)-X-III and (FeX3-)-X-II. This distribution of Fe-III and Fen species is attributed to electrochemical reduction of Fe3+ at the negatively charged ES needle. Native anions such as perrhenate or molybdate produce singly charged analogues such as ReO4- or HMoO4- Metal-EDTA complexes are seen as (MY-)-Y-III Or (MHY-)-H-II. The sensitivity for these native anions is suppressed by competition with the excess chloride or nitrate used to produce the metal-containing complex ions.