Fabrication of porous polymeric matrix drug delivery devices using the selective laser sintering technique

New techniques in solid freeform fabrication (SI;F) have prompted research into methods of manufacturing and controlling porosity. The strategy of this research is to integrate computer aided design (CAD) and the SFF technique of selective laser sintering (SLS) to fabricate porous polymeric matrix drug delivery devices (DDDs). This study focuses on the control of the porosity of a matrix by manipulating the SLS process parameters of laser beam power and scan speed. Methylene blue dye is used as a drug model to infiltrate the matrices via a degassing method; visual inspection of dye penetration into the matrices is carried out. Most notably, the laser power matrices show a two-stage penetration process. The matrices are sectioned along the XZ planes and viewed under scanning electron microscope (SEM). The morphologies of the samples reveal a general increase in channel widths as laser power decreases and scan speed increases. The fractional release profiles of the matrices are determined by allowing the dye to diffuse out in vitro within a controlled environment. The results show that laser power and scan speed matrices deliver the dye for 8-9 days and have an evenly distributed profile. Mercury porosimetry is used to analyse the porosity of the matrices. Laser power matrices show a linear relationship between porosity and variation in parameter values. However, the same relationship for scan speed matrices turns out to be rather inconsistent. Relationships between the SLS parameters and the experimental results are developed using the fractional release rate equation for the infinite slab porous matrix DDD as a basis for correlation.