Electron (charge) density studies of cellulose models

Introductory material first describes electron density approaches and demonstrates visualization of electron lone pairs and bonding as concentrations of electron density. Then it focuses on the application of Bader's Quantum Theory of Atoms-in-Molecules (AIM) to cellulose models. The purpose of the work is to identify the various interactions that stabilize cellulose structure. AIM analysis aids study of non-covalent interactions, especially those for which geometric criteria are not well established. The models were in the form of pairs of cellotriose molecules, methylated at the O1 and O4 ends. Based on the unit cell of cellulose I beta, there were corner-corner, and center-center pairs that correspond to (200) sheets, and corner-center pairings that corresponded to (1-10) and (110) stacks. AIM analysis (or charge-density topology analysis) was applied before and after minimization in vacuum and in continuum solvation. Besides the conventional O-H center dot center dot center dot O hydrogen bonds, all of which were known from geometric criteria, C-H center dot center dot center dot O hydrogen bonds (some previously reported), and some O center dot center dot center dot O and H center dot center dot center dot H interactions were found. Non-covalent bonds in the (200) sheets were maintained in all calculations with the exception of a weak, bifurcated O6-H center dot center dot center dot O2'' bond that was not found in the corner-corner pair model and did not survive minimization. Nor did the O6 center dot center dot center dot O4 interactions on the reducing ends of the triosides. Pairs of molecules along the (110) plane had an equal number (12) of non-covalent bonds compared to the pairs along the (1-10) plane, but the AIM parameters indicated the bonds between the pairs in the (110) plane were weaker. Intra-molecular O-H center dot center dot center dot O hydrogen bonds survived in these minimized pairs, but the relative chain alignments usually did not.