Deoxidation of molybdenum during vacuum sintering

Molybdenum is usually fabricated through the powder metallurgy (P/M) process, using fine powders with a relatively high oxygen content. Oxygen, however, is one of the main elements causing embrittlement during the deformation processing of molybdenum, such as rolling, extrusion, and forging. Thus, how to deoxidize the compact as completely as possible is critical in the P/M process. This study shows that, as an alternative to hydrogen reduction, molybdenum oxides can be reduced by adding organic lubricants to the compact and by sintering the compact under high vacuum with long sintering times. After 10 hours of sintering at 1750 T and a 0.03 torr vacuum, the oxygen content decreased from 0.927 wt pct of the green compact to 0.017 wt pct. The ductility also improved significantly compared to compacts sintered for 5 hours, which contained 0.218 wt pct oxygen. The morphology evolution, weight changes, and the X-ray analysis indicated that the oxide was first present in the form of MoO3. It was then transformed into MoO2 before deoxidation was completed. Two deoxidation mechanisms were identified: evaporation and decomposition of MoO3 and MoO2, with evaporation being dominant in the early-stage sintering and decomposition being dominant in the later stage.