Transverse galloping of circular cylinders fitted with solid and slotted splitter plates

The galloping response of a circular cylinder fitted with three different splitter plates and free to oscillate transverse to a free stream has been investigated considering variations in plate length and plate porosity. Models were mounted in a low mass and damping elastic system and experiments have been carried out in a recirculating water channel in the Reynolds number range of 1500 to 16 000. Solid splitter plates of 0.5 and 1.0 diameter in length are shown to produce severe galloping responses, reaching displacements of 1.8 diameters in amplitude at a reduced velocity of around 8. Fitting a slotted plate with a porosity ratio of 30% also caused considerable vibration, but with a reduced rate of increase with flow speed. All results are compared with the typical vortex-induced vibration response of a plain cylinder. Force decomposition in relation to the body velocity and acceleration indicates that a galloping mechanism is responsible for extracting energy from the flow and driving the oscillations. Visualisation of the flow field around the devices performed with PIV reveal that the reattachment of the free shear layers on the tip of the plates is the hydrodynamic mechanism driving the excitation. (C) 2014 Elsevier Ltd. All rights reserved.