Organosoluble and light-colored fluorinated polyimides derived from 2,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene and aromatic dianhydrides

A novel fluorinated bis(ether amine) monomer, 2,3-bis(4-amino-2-trifluoromethylphenoxy)naphthalene, was prepared through the nucleophilic aromatic substitution reaction of 2-chloro-5-nitrobenzotrifluoride and 2,3-dihydroxynaphthalene in the presence of potassium carbonate, followed by catalytic reduction with hydrazine and Pd/C. A series of new fluorine-containing polyimides having inherent viscosities of 0.54 to 1.10 dl/g were synthesized from the diamine with various commercially available aromatic dianhydrides using a standard two-stage process with thermal imidization of poly(amic acid) films. These polyimides were highly soluble in a variety of organic solvents, and most of them afforded transparent, light-colored, and tough films with good tensile strengths. These polyimides exhibited glass transition temperatures (T(g)s) of 247-300 degreesC and showed no significant decomposition below 500 degreesC under either nitrogen or air atmosphere. Except for the polyimide derived from pyromellitic dianhydride, the polyimide films were almost colorless, with an ultraviolet-visible absorption cutoff wavelength below 400 nm and low b* values (a yellowness index) of 10.7-41.9. These polyimides had dielectric constants of 3.09 to 3.65 (1 MHz) and moisture absorptions in the range of 0.2-0.3 wt%. (C) 2003 Elsevier Ltd. All rights reserved.