Extrusion of regular and waxy barley flours for production of expanded cereals

Grains of two regular and two waxy barley cultivars were milled into break and reduction stream flours using a wheat milling mill, granulated to facilitate feeding and flow through the barrel, and extruded to form expanded products using a modified laboratory single-screw extruder. As moisture content of barley granules decreased from 21 to 17%, the expansion index of extrudates increased from 1.81 to 2.68, while apparent modulus of compression work (AMCW) decreased from 17.1 x 10(4) to 7.8 x 10(4) N/m(2). Break stream flours of both regular and waxy barley produced extrudates with higher expansion index (2.72-3.02), higher water absorption index (WAI), and lower AMCW than extrudates from reduction stream flours. Extrudates produced from regular barley had generally higher expansion and lower density than those produced from waxy barley. The specific mechanical energy (SME) was greater during extrusion of regular than of waxy barley. Barrel temperatures of 130, 150, and 170degreesC for the feeding, compression, and metering sections, respectively, resulted in higher SME, higher expansion index, lower water absorption index and lower AMCW of extrudates compared with a constant extruder barrel temperature of 160degreesC. Increased screw speed generally resulted in larger expansion index and increased WAI of extrudates. With increased feed rate from 89 to 96 g/min, the expansion index of extrudates decreased from 3.20 to 2.78 in regular barley and 3.23 to 2.72 in waxy barley, and harder extrudates were produced.