Journal
JOURNAL OF WOOD SCIENCE
Volume 50, Issue 4, Pages 337-342Publisher
SPRINGER TOKYO
DOI: 10.1007/s10086-003-0570-6
Keywords
low molecular weight PF resin; pressure holding; densification; cell wall collapse
Categories
Ask authors/readers for more resources
The deformation behavior of low molecular weight phenol formaldehyde (PF) resin-impregnated wood under compression in the radial direction was investigated for obtaining high-strength wood at low pressing pressures. Flat-sawn grain Japanese cedar (Cryptomeria japonica) blocks with a density of 0.34g/cm(3) were treated with aqueous solution of 20% low molecular weight PF resin resulting in weight gain of 60.8%. Oven-dried specimens were compressed using hot plates fixed to a testing machine. The temperature was 150degreesC and the pressing speed was 5mm/min. The impregnation of PF resin caused significant softening of the cell walls resulting in collapse at low pressures. The cell wall collapse was strain-dependent and occurred at a strain of 0.05-0.06mm/mm regardless of whether the wood was treated with PF resin. Thus, pressure holding causing creep deformation of the cell walls was also effective in initiating cell wall collapse at low pressure. Utilizing a combination of low molecular weight PF resin impregnation and pressure holding at 2MPa resulted in a density increase of PF resin-treated wood from 0.45 to 1.1g/cm(3). At the same time, the Young's modulus and bending strength increased from 10GPa to 22GPa and 80MPa to 250MPa, respectively. It can be concluded that effective utilization of the collapse region of the cell wall is a desirable method for obtaining high-strength PF resin-impregnated wood at low pressing pressures.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available