Related references
Note: Only part of the references are listed.Determination of P, S and Si in biodiesel, diesel and lubricating oil using ICP-MS/MS
Renata S. Amais et al.
ANALYTICAL METHODS (2014)
Extraction induced by emulsion breaking for trace multi-element determination in edible vegetable oils by ICP-MS
Yang-Ming He et al.
ANALYTICAL METHODS (2014)
Determination of zinc in edible oils by flow injection FAAS after extraction induced by emulsion breaking procedure
Dilek Bakircioglu et al.
FOOD CHEMISTRY (2014)
Extraction induced by emulsion breaking as a tool for Ca and Mg determination in biodiesel by fast sequential flame atomic absorption spectrometry (FS-FAAS) using Co as internal standard
Fernanda M. Pereira et al.
MICROCHEMICAL JOURNAL (2014)
On the performance of laser-induced breakdown spectroscopy for direct determination of trace metals in lubricating oils
Lijuan Zheng et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2014)
Waste lubricating oil treatment by extraction and adsorption
Rafie R. Mohammed et al.
CHEMICAL ENGINEERING JOURNAL (2013)
Application of a four-variables Doehlert design for the multivariate optimization of copper determination in petroleum-derived insulating oils by GFAAS employing the dilute-and-shot approach
Luiz Fernando S. Caldas et al.
FUEL (2013)
Green approaches to determine metals in lubricating oils by electrothermal atomic absorption spectrometry (ETAAS)
S. Carballo et al.
MICROCHEMICAL JOURNAL (2013)
Novel extraction induced by emulsion breaking as a tool for the determination of trace concentrations of Cu, Mn and Ni in biodiesel by electrothermal atomic absorption spectrometry
Fernanda M. Pereira et al.
TALANTA (2013)
Application of the extraction induced by emulsion breaking for the determination of Cu, Fe and Mn in used lubricating oils by flame atomic absorption spectrometry
Luiz Fernando S. Caldas et al.
TALANTA (2013)
Pressurized liquid extraction to determine Mg, Al, Ti, Cu, Sn and Pb in lubricating oils by inductively coupled plasma mass spectrometry
S. Carballo-Paradelo et al.
JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY (2012)
Extraction induced by emulsion breaking for metals determination in diesel oil by ICP-MS
Ricardo J. Cassella et al.
JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY (2012)
Analytical applications of emulsions and microemulsions
Jose Luis Burguera et al.
TALANTA (2012)
Application of the extraction induced by emulsion breaking for the determination of chromium and manganese in edible oils by electrothermal atomic absorption spectrometry
Nicolle F. Robaina et al.
TALANTA (2012)
Multivariate optimization of the determination of zinc in diesel oil employing a novel extraction strategy based on emulsion breaking
Ricardo J. Cassella et al.
ANALYTICA CHIMICA ACTA (2011)
Extraction induced by emulsion breaking: a novel strategy for the trace metals determination in diesel oil samples by electrothermal atomic absorption spectrometry
Ricardo J. Cassella et al.
JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY (2010)
Determination of wear metals in lubricating oils by flame atomic absorption spectrophotometry
W. Yawar
JOURNAL OF ANALYTICAL CHEMISTRY (2010)
Determination of calcium, magnesium and zinc in lubricating oils by flame atomic absorption spectrometry using a three-component solution
Ariane V. Zmozinski et al.
TALANTA (2010)
Evaluation of Lubricating Oil Preparation Procedures for the Determination of Al, Ba, Mo, Si and V by High-Resolution Continuum Source FAAS
Volnei Resta Amorim FILHO et al.
ANALYTICAL SCIENCES (2009)
The determination of trace metals in lubricating oils by atomic spectrometry
Ricardo Q. Aucelio et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2007)
Combination of ultrasonic extraction and stripping analysis: An effective and reliable way for the determination of Cu and Pb in lubricating oils
RAA Munoz et al.
TALANTA (2006)
Quantitative determination of wear metals in engine oils using laser-induced breakdown spectroscopy: A comparison between liquid jets and static liquids
P Yaroshchyk et al.
SPECTROCHIMICA ACTA PART B-ATOMIC SPECTROSCOPY (2005)
Potentiometric stripping analysis for simultaneous determination of copper and lead in lubricating oils after total digestion in a focused microwave-assisted oven
RAA Munoz et al.
MICROCHIMICA ACTA (2005)
Simultaneous determination of copper and lead in ethanol fuel by anodic stripping voltammetry
RAA Munoz et al.
MICROCHEMICAL JOURNAL (2004)
Determination of wear metals in engine oil by mild acid digestion and energy dispersive X-ray fluorescence spectrometry using solid phase extraction disks
Z Yang et al.
TALANTA (2003)
Direct determination of metals in lubricating oils by laser ablation coupled to inductively coupled plasma time-of-flight mass spectrometry
NH Bings
JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY (2002)
Determination of metals in lubricating oils by X-ray fluorescence spectrometry
M Pouzar et al.
TALANTA (2001)
Determination of heavy metals in waste lubricating oils by inductively coupled plasma-optical emission spectrometry
T Kuokkanen et al.
INTERNATIONAL JOURNAL OF ENVIRONMENTAL ANALYTICAL CHEMISTRY (2001)
Determination of metals in lubricating oils by flame atomic absorption spectrometry using a single-bore high-pressure pneumatic nebulizer
J Mora et al.
ANALYST (2000)
Sequential determination of Sb and Sn in used lubricating oil by electrothermal atomic absorption spectrometry using Ru as a permanent modifier and microemulsion sample introduction
RQ Aucelio et al.
JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY (2000)
Share Paper
