Journal
JOURNAL OF BUILDING ENGINEERING
Volume 16, Issue -, Pages 1-19Publisher
ELSEVIER SCIENCE BV
DOI: 10.1016/j.jobe.2017.12.002
Keywords
CFRP; Compressive characteristics; Flexural characteristics; GFRP; Hot air oven curing; Tensile characteristics
Funding
- Council of Scientific & Industrial Research (CSIR), New Delhi [22(0631)/13/EMR-II]
Ask authors/readers for more resources
Carbon fiber reinforced polymer (CFRP) and glass fiber reinforced polymer (GFRP) laminates are used in different structural elements of buildings such as beams, columns, floor slabs, hand railings and for the strengthening of structures. Strength and stiffness of CFRP and GFRP laminates are highly dependent on curing temperature and time. Therefore, it is important to study the influence of temperature and duration of curing on the strength and stiffness of laminates. This study deals with the influence of curing duration and temperature of CFRP and GFRP laminates on the tensile, compressive and flexural characteristics. Laminates were cured at temperatures of 80 degrees C, 120 degrees C and 160 degrees C for different time periods such as 1, 2 and 3 h in a hot air oven and another laminate cured at room temperature for 15 days as a reference. It is observed that the mechanical properties of the CFRP and GFRP specimens have better performance when cured under oven heating than being fabricated at room temperature. Conclusions have been drawn that longitudinal tensile strength of CFRP and GFRP laminates is better at 80 degrees C temperature curing for three hours and the maximum Young's modulus of CFRP and GFRP laminates was achieved at 80 degrees C and 120 degrees C temperature for 3-h curing, respectively. Similarly, peak longitudinal compressive strength for CFRP specimens was obtained at 80 degrees C temperature cured for three hours and GFRP specimens cured at 80 degrees C temperature for 1-h. The flexural strength of CFRP and GFRP specimens was highest at 160 degrees C temperature cured for 1-h. However, the flexural stiffness of CFRP and GFRP specimens was dominant at a temperature of 120 degrees C cured for 1-h and 3-h, respectively.
Authors
I am an author on this paper
Click your name to claim this paper and add it to your profile.
Reviews
Recommended
No Data Available