Related references
Note: Only part of the references are listed.Numerical study of wall-impinging ignition at different wall distances for cold start of heavy-duty diesel engine
Yaqing Bo et al.
APPLIED THERMAL ENGINEERING (2022)
Experimental and modeling analysis of multiple-injection strategies with B20 operation in a CRDI engine
Nivin Chacko et al.
FUEL (2021)
Effects of injection timing and rail pressure on particulate size-number distribution of a common rail DI engine fueled with fischer-tropsch diesel synthesized from coal
Limin Geng et al.
JOURNAL OF THE ENERGY INSTITUTE (2021)
Multiple injection for improving knock, gaseous and particulate matter emissions in direct injection SI engines
Taehoon Han et al.
APPLIED ENERGY (2020)
Study of evaporative diesel spray interaction in multiple injections using optical diagnostics
Raul Payri et al.
APPLIED THERMAL ENGINEERING (2020)
Study of diesel fuel multiple injection characteristics using shadow-graphic imaging technique with CRDI system in constant volume chamber
Ghanta Ram Sai Avinash et al.
FUEL (2020)
Experimental study on the combustion characteristics of impinging diesel spray at low temperature environment
Fushui Liu et al.
APPLIED THERMAL ENGINEERING (2019)
A comprehensive analysis of multiple injection strategies for improving diesel combustion process under cold-start conditions
Hyunwook Park et al.
FUEL (2019)
Numerical study on critical ambient temperature for auto-ignition of the diesel spray under cold-start conditions
Fushui Liu et al.
FUEL (2019)
Direct numerical simulation of a temporally evolving air/n-dodecane jet at low-temperature diesel-relevant conditions
Giulio Borghesi et al.
COMBUSTION AND FLAME (2018)
A compact skeletal mechanism for n-dodecane with optimized semi-global low-temperature chemistry for diesel engine simulations
Tong Yao et al.
FUEL (2017)
Improvement of diesel combustion with multiple injections at cold condition in a constant volume combustion chamber
Joonsik Hwang et al.
FUEL (2017)
An investigation on a diesel jet's ignition characteristics under cold-start conditions
Fushui Liu et al.
APPLIED THERMAL ENGINEERING (2017)
Experimental investigation on spray and atomization characteristics of diesel/gasoline/ethanol blends in high pressure common rail injection system
Zehao Feng et al.
ENERGY (2016)
Experimental study of the injection conditions influence over n-dodecane and diesel sprays with two ECN single-hole nozzles. Part II: Reactive atmosphere
Raul Payri et al.
ENERGY CONVERSION AND MANAGEMENT (2016)
Effects of diesel fuel temperature on fuel flow and spray characteristics
Youngsoo Park et al.
FUEL (2015)
Experimental study on diesel fuel injection characteristics under cold start conditions with single and split injection strategies
Ziman Wang et al.
FUEL PROCESSING TECHNOLOGY (2015)
Internal combustion engine cold-start efficiency: A review of the problem, causes and potential solutions
Andrew Roberts et al.
ENERGY CONVERSION AND MANAGEMENT (2014)
Grid-Convergent Spray Models for Internal Combustion Engine Computational Fluid Dynamics Simulations
P. K. Senecal et al.
JOURNAL OF ENERGY RESOURCES TECHNOLOGY-TRANSACTIONS OF THE ASME (2014)
Experimental characterization of diesel ignition and lift-off length using a single-hole ECN injector
Jesus Benajes et al.
APPLIED THERMAL ENGINEERING (2013)
Fuel temperature influence on diesel sprays in inert and reacting conditions
Raul Payri et al.
APPLIED THERMAL ENGINEERING (2012)
Influence of spray-glow plug configuration on cold start combustion for high-speed direct injection diesel engines
J. V. Pastor et al.
ENERGY (2011)
The effect of temperature and pressure on thermodynamic properties of diesel and biodiesel fuels
R. Payri et al.
FUEL (2011)
Methodology to estimate the threshold in-cylinder temperature for self-ignition of fuel during cold start of Diesel engines
A. Broatch et al.
ENERGY (2010)
Investigation of Diesel combustion using multiple injection strategies for idling after cold start of passenger-car engines
F. Payri et al.
EXPERIMENTAL THERMAL AND FLUID SCIENCE (2010)
A study on the macroscopic spray behavior and atomization characteristics of biodiesel and dimethyl ether sprays under increased ambient pressure
Hyung Jun Kim et al.
FUEL PROCESSING TECHNOLOGY (2010)
Partially Premixed Combustion in a Diesel Engine Induced by a Pilot Injection at the Low-pressure Top Dead Center
Jesus Benajes et al.
ENERGY & FUELS (2009)
Numerical and experimental study on effect of wall geometry on wall impingement process of hollow-cone fuel spray under various ambient conditions
Young-Sam Shim et al.
INTERNATIONAL JOURNAL OF MULTIPHASE FLOW (2009)
Cold Start on Diesel Engine: Is Low Compression Ratio Compatible with Cold Start Requirements?
P. Pacaud et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2009)
Effect of Injection Strategy on Cold Start Performance in an Optical Light-Duty DI Diesel Engine
Clement Chartier et al.
SAE INTERNATIONAL JOURNAL OF ENGINES (2009)
An experimental investigation of ethylene/O2/diluent mixtures:: Laminar flame speeds with preheat and ignition delays at high pressures
Kamal Kumar et al.
COMBUSTION AND FLAME (2008)
Combustion behaviors of a compression-ignition engine fuelled with diesel/methanol blends under various fuel delivery advance angles
ZH Huang et al.
BIORESOURCE TECHNOLOGY (2004)