4.7 Article

Machine learning prediction models for compressive strength of calcined sludge-cement composites

Related references

Note: Only part of the references are listed.
Article Construction & Building Technology

Chemical effect of sewage sludge ash on early-age hydration of cement used as supplementary cementitious material

Zhiyang Chang et al.

Summary: This study investigated the chemical effect of sewage sludge ash on early-age hydration of cement. Two types of sludge ash calcined at 600 degrees C and 800 degrees C were blended with cement for analysis. The dissolution of aluminate and silicate in the ash significantly inhibited the C3S dissolution and caused high initial hydration heat. However, higher calcination temperature decreased the activity of aluminate in the 5800 ash, resulting in slight effect on early cement hydration.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Article Construction & Building Technology

Enhancement of compressive strength of high-volume fly ash cement paste by wet grinded cement: Towards low carbon cementitious materials

Hongbo Tan et al.

Summary: This study used wet grinding to obtain superfine particles in cement and found that it enhances the compressive strength of high-volume fly ash (HVFA) systems. The wet ground cement (WGC) reduced CO2 emissions and costs compared to Portland cement (PC), making it a potential solution for low carbon cementitious materials.

CONSTRUCTION AND BUILDING MATERIALS (2022)

Review Energy & Fuels

Recovery of Sewage Sludge in the Cement Industry

Carmen Otilia Rusanescu et al.

Summary: This paper presents an analysis of the literature on the possibility of using sewage sludge in the cement industry to reduce carbon dioxide emissions and solve the problem of sewage sludge disposal. The results show that sewage sludge ash can be used as a partial substitute for cement, with good hydration characteristics and mechanical properties.

ENERGIES (2022)

Article Engineering, Geological

Deep learning for efficient stochastic analysis with spatial variability

Xuzhen He et al.

Summary: The study introduces the use of deep learning to train models for improving computational efficiency in stochastic analysis. Training models with a large dataset allows for accurate results for new data without the need for re-training. The research shows that deep learning models have a competitive edge in complex problems and can extend their capabilities by generating more data and re-training.

ACTA GEOTECHNICA (2022)

Article Energy & Fuels

Can thermocatalytic transformations of captured CO2 reduce CO2 emissions?

Jingpeng Zhang et al.

Summary: The thermocatalytic transformations of captured CO2 into CO, CH3OH, or CH4 show potential for reducing CO2 emissions, but currently rely heavily on fossil fuels for energy input. More renewable energy sources are needed to achieve net CO2 reduction.

APPLIED ENERGY (2021)

Article Construction & Building Technology

RSM-based evaluation of mechanical and durability properties of recycled aggregate concrete containing GGBFS and silica fume

Alireza Habibi et al.

Summary: This study evaluated the mechanical properties and durability of Recycled Aggregate Concrete (RAC) containing GGBFS and Silica Fume (SF) using Response Surface Methodology (RSM). The results showed that Recycled Aggregate (RA) had a negative effect on the durability properties of concrete at 7 and 28 days, but not at 90 days. Optimal mix designs were obtained based on two specific scenarios to address environmental issues related to concrete production.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Article Multidisciplinary Sciences

Machine learning enables prompt prediction of hydration kinetics of multicomponent cementitious systems

Jonathan Lapeyre et al.

Summary: This paper introduces a machine learning-based methodology to enable prompt and high-fidelity prediction of time-dependent hydration kinetics of cement, both in plain and multicomponent systems, using the system's physicochemical characteristics as inputs. Based on a database comprising hydration kinetics profiles of 235 unique systems, a random forests (RF) model was trained to predict time-dependent hydration kinetics of cement in new, multicomponent systems, and formulate optimal mixture designs.

SCIENTIFIC REPORTS (2021)

Article Biotechnology & Applied Microbiology

Applying environmental Kuznets curve framework to assess the nexus of industry, globalization, and CO2 emission

Bilal Aslam et al.

Summary: Malaysia has seen explosive industrial growth in recent years, driven by globalization and economic development. CO2 emissions have steadily risen with high economic growth, following a U-shaped environmental Kuznets curve. Globalization and trade openness contribute to Malaysian CO2 emissions, while industrialization has a negative impact on CO2 emissions.

ENVIRONMENTAL TECHNOLOGY & INNOVATION (2021)

Article Materials Science, Multidisciplinary

Machine learning for high-fidelity prediction of cement hydration kinetics in blended systems

Rachel Cook et al.

Summary: This study utilized a Random Forests (RF) model to predict the time-dependent hydration kinetics of OPC-based systems (specifically [OPC + mineral additive(s)] systems) with high fidelity, using the physiochemical attributes of the system as inputs. Results demonstrate that the RF model can be used to formulate mixture designs that meet user-imposed kinetics-related criteria. Additionally, the findings can be extended to develop mixture designs that meet target kinetic criteria, even without a comprehensive understanding of the underlying kinetic mechanisms.

MATERIALS & DESIGN (2021)

Article Business

Machine learning and deep learning

Christian Janiesch et al.

Summary: This article introduces the basic concepts of machine learning and deep learning in intelligent systems, as well as their advantages and challenges in practical applications, emphasizing the importance of human-machine interaction and artificial intelligence servitization.

ELECTRONIC MARKETS (2021)

Article Green & Sustainable Science & Technology

CO2 emission reduction in the cement industry by using a solar calciner

Gkiokchan Moumin et al.

RENEWABLE ENERGY (2020)

Article Construction & Building Technology

An ensemble machine learning approach for prediction and optimization of modulus of elasticity of recycled aggregate concrete

Taihao Han et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Review Construction & Building Technology

Performance comparison of cement replacing materials in concrete: Limestone fillers and supplementary cementing materials - A review

Daman K. Panesar et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Efficiency of Portland-pozzolana cements: Water demand, chemical reactivity and environmental impact

Pedro Cesar R. A. Abrao et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Article Construction & Building Technology

Prediction of surface chloride concentration of marine concrete using ensemble machine learning

Rong Cai et al.

CEMENT AND CONCRETE RESEARCH (2020)

Article Engineering, Environmental

Recycling of raw water treatment sludge in cementitious composites: effects on heat evolution, compressive strength and microstructure

Samuel De Carvalho Gomes et al.

RESOURCES CONSERVATION AND RECYCLING (2020)

Review Biotechnology & Applied Microbiology

A Detailed Review on Decision Tree and Random Forest

Bhusban Talekar et al.

BIOSCIENCE BIOTECHNOLOGY RESEARCH COMMUNICATIONS (2020)

Review Engineering, Environmental

Progress in manufacture and properties of construction materials incorporating water treatment sludge: A review

Samuel de Carvalho Gomes et al.

RESOURCES CONSERVATION AND RECYCLING (2019)

Article Construction & Building Technology

Prediction of concrete coefficient of thermal expansion and other properties using machine learning

Vanessa Nilsen et al.

CONSTRUCTION AND BUILDING MATERIALS (2019)

Article Construction & Building Technology

Prediction of Compressive Strength of Concrete: Critical Comparison of Performance of a Hybrid Machine Learning Model with Standalone Models

Rachel Cook et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2019)

Article Construction & Building Technology

A novel optimised self-learning method for compressive strength prediction of high performance concrete

Yang Yu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Article Construction & Building Technology

Development of a CO2 emission benchmark for achieving the national CO2 emission reduction target by 2030

Kwangbok Jeong et al.

ENERGY AND BUILDINGS (2018)

Article Thermodynamics

Predicting kinetic triplets using a 1d convolutional neural network

Dongyang Kuang et al.

THERMOCHIMICA ACTA (2018)

Article Energy & Fuels

Sludge production from municipal wastewater treatment in sewage treatment plant

Ayhan Demirbas et al.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS (2017)

Article Construction & Building Technology

The effectiveness of the incineration of sewage sludge on the evolution of physicochemical and mechanical properties of Portland cement

Sara Naamane et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Article Oncology

A gentle introduction to artificial neural networks

Zhongheng Zhang

ANNALS OF TRANSLATIONAL MEDICINE (2016)

Article Construction & Building Technology

The use of water treatment plant sludge ash as a mineral addition

A. L. G. Gastaldini et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Review Green & Sustainable Science & Technology

Quantifying CO2 emissions from China's cement industry

Weiguo Shen et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2015)

Review Rheumatology

Introduction to statistical modelling: linear regression

Mark Lunt

RHEUMATOLOGY (2015)

Article Mathematical & Computational Biology

Machine learning for neuroirnaging with scikit-learn

Alexandre Abraham et al.

FRONTIERS IN NEUROINFORMATICS (2014)

Article Engineering, Multidisciplinary

Seawater effect on durability of ternary cements. Synergy of chloride and sulphate ions

M. Frias et al.

COMPOSITES PART B-ENGINEERING (2013)

Article Construction & Building Technology

Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete

Louise K. Turner et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Review Green & Sustainable Science & Technology

Global strategies and potentials to curb CO2 emissions in cement industry

Emad Benhelal et al.

JOURNAL OF CLEANER PRODUCTION (2013)

Review Green & Sustainable Science & Technology

Sludge: A waste or renewable source for energy and resources recovery?

Vinay Kumar Tyagi et al.

RENEWABLE & SUSTAINABLE ENERGY REVIEWS (2013)

Article Construction & Building Technology

Properties of stabilized/solidified admixtures of cement and sewage sludge

O. Malliou et al.

CEMENT & CONCRETE COMPOSITES (2007)

Article Statistics & Probability

Support vector machines with applications

Javier M. Moguerza et al.

STATISTICAL SCIENCE (2006)

Review Computer Science, Software Engineering

Machine learning and software engineering

D Zhang et al.

SOFTWARE QUALITY JOURNAL (2003)

Article Construction & Building Technology

Stabilisation and solidification of sewage sludges with Portland cement

S Valls et al.

CEMENT AND CONCRETE RESEARCH (2000)