☆ 4.7 Article

On the use of empirical phase angle limits for the grading of asphalt binder

CONSTRUCTION AND BUILDING MATERIALS (2022)

Related references

Note: Only part of the references are listed.

Article Chemistry, Physical

Experimental Evaluation and Modeling of Physical Hardening in Asphalt Binders

Chiara Tozzi et al.

Summary: The paper discusses the experimental evaluation and modeling of physical hardening in asphalt binders. The results confirm the significant influence of hardening on the creep response of asphalt binders, which can be quantitatively assessed using appropriate rheological parameters and the loading time-conditioning time superposition principle. Two mechanical models were used to describe the physical hardening effects, and the improved model showed better prediction accuracy. The study highlights the practical implications by suggesting ranking criteria for the evaluation of asphalt binders.

MATERIALS (2022)

Add to Collection

Article Engineering, Environmental

Lessons learned from 60 years of pavement trials in continental climate regions of Canada

Jianmin Ma et al.

Summary: This article discusses the importance of consistency, temperature sensitivity, phase homogeneity, and durability of asphalt binders in pavement performance. It is found that optimizing the binder formulation can lead to the design of longer-lasting pavements, providing substantial savings and preparing for climate change.

CHEMICAL ENGINEERING JOURNAL (2022)

Add to Collection

Article Construction & Building Technology

Investigation on the effect of physical hardening and aging temperature on low-temperature rheological properties of asphalt binder

Di Wang et al.

Summary: This paper experimentally investigates and models the impact of physical hardening and aging temperatures on the low temperature rheological properties of asphalt binders. The results indicate that physical hardening causes a significant increase in complex shear modulus and creep stiffness, which diminishes as conditioning time is extended. Linear correlations are observed between results from different conditioning times, and reducing aging temperatures can mitigate the effect of physical hardening.

ROAD MATERIALS AND PAVEMENT DESIGN (2021)

Add to Collection

Article Construction & Building Technology

Another look at the use of modulated differential scanning calorimetry to study thermoreversible aging phenomena in asphalt binders

Haibo Ding et al.

Summary: Thermoreversible aging of asphalt is an important attribute that affects durability of flexible pavements. The aging process strongly depends on composition and particularly wax content. Binders produced from oil sands-derived crude oil with low wax contents benefit overall life cycle costs and improve the sustainability of the road building industry.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Effective control of flexible asphalt pavement cracking through quality assurance testing of extracted and recovered binders

Yiming Li et al.

Summary: The study found significant variability among asphalt binders of ostensibly the same AASHTO M 320 grade, with CTOD values affecting the materials' cold temperature resistance and EBBR LLTG highly correlated with the T(delta = 30 degrees) grade. The results suggest that two limiting phase angle temperatures can be utilized for a more precise, accurate, and practical specification protocol for controlling cold temperature cracking in the future.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Predicting the low-temperature performance of asphalt binder based on rheological model

Jiaqiu Xu et al.

Summary: This study proposed an approach to predict the low-temperature performance of asphalt binder based on rheological models. The method deduced the temperature of asphalt binder undergoing glass transition using modified Havriliak-Negami model and validated it through TC test and DSC. The relationship between this approach and the low-temperature performance of asphalt binder was established through nonlinear fitting and linear regression analysis.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Thermoreversible aging in model asphalt binders

Haibo Ding et al.

Summary: This research focuses on the impact of different pure waxes in asphalt binders on thermoreversible aging, finding that eicosane improves low-temperature performance but exacerbates thermoreversible aging. The branching of straight-chain hydrocarbons can enhance low-temperature performance without worsening thermoreversible aging. Limiting phase angle temperature is more sensitive to C30 and squalane additives.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Chemistry, Physical

Enhanced Acceptance Specification of Asphalt Binder to Drive Sustainability in the Paving Industry

Yiming Li et al.

Summary: Testing small amounts of extracted and recovered asphalt binder in accordance with traffic and climate requirements can facilitate the paving industry's transition towards a true circular economy. The enhanced protocol uses a very small amount of material yet provides comparable results, with phase angle measurements appearing to be optimal for performance grading. Further field study is needed to determine if additional binder properties are required for the control of cracking.

MATERIALS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Determining the Sustainable Component of Wax-Based Warm Mix Additives for Improving the Cracking Resistance of Asphalt Binders

Haopeng Zhang et al.

Summary: The cracking resistance of asphalt binder is crucial for the durability of asphalt pavements and wax-based warm mix additives aim to enhance this property. Different types of wax additives have varying effects on the cracking resistance, with long-chain molecules improving high-temperature performance and short-chain molecules enhancing ductile fracture resistance. The recommended optimum carbon number range for wax-based additives is C-40 to C-60, determined through a combination of microscopic and macroscopic testing methods.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Construction & Building Technology

Clustering aged bitumens through multivariate statistical analyses using phase angle master curve

Rodrigo Shigueiro Siroma et al.

Summary: This study successfully estimated the aging level of 23 neat bitumens based solely on the evaluation of their phase angle master curve, highlighting the potential of PCA and HCA in this field and providing a new perspective on researching bitumen aging.

ROAD MATERIALS AND PAVEMENT DESIGN (2021)

Add to Collection

Article Construction & Building Technology

Impact of the asphalt binder rheological behavior on the value of the ΔTc parameter

Didier Lesueur et al.

Summary: This paper examines the addition of a new criterion, Delta Tc, to the current Performance Grading system for asphalt binders in the USA, discussing its relationship with other binder rheological properties and highlighting the relevant parameters controlling Delta Tc. Experimental data confirm that Delta Tc is of pure rheological origin.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Construction & Building Technology

Study on the effects of reversible aging on the low temperature performance of asphalt binders

Jiaqiu Xu et al.

Summary: This study reveals that the low temperature performance of asphalt binders continues to decline with the extension of conditioning time, shown by an increase in grade loss, thermal stress, and critical cracking temperature. Reversible aging has a significant impact on the low temperature performance of asphalt binders, lowering the low temperature grade by up to one grade. The Avrami isothermal crystallization kinetic theory accurately characterizes the reversible aging tendency of asphalt binders, while molecular dynamics simulation results indicate that the asphaltene component contributes the most to the reversible aging process of asphalt binders.

CONSTRUCTION AND BUILDING MATERIALS (2021)

Add to Collection

Article Engineering, Civil

Relationship between Rheological Indices and Cracking Performance of Virgin, Recycled, and Rejuvenated Asphalt Binders and Mixtures

Fawaz Kaseer et al.

Summary: The rheological properties of asphalt significantly influence the cracking performance of asphalt mixtures, with various rheological indices showing correlations to binder performance and mixture cracking resistance. Among the rheological indices, the G-R parameter, crossover temperature, and Delta T-c demonstrated the best correlation to asphalt mixture and field core cracking performance.

TRANSPORTATION RESEARCH RECORD (2021)

Add to Collection

Article Construction & Building Technology

Improved performance grading of asphalt cement and hot mix asphalt in Ontario, Canada

Moses Akentuna et al.

Summary: This paper discusses the issue of significant premature pavement cracking faced by Ontario municipal government agencies, the development and implementation of stricter specifications, as well as the control measures for hard to detect constituents.

INTERNATIONAL JOURNAL OF PAVEMENT RESEARCH AND TECHNOLOGY (2021)

Add to Collection

Article Construction & Building Technology

Performance of asphalt mixtures with high recycled materials content and recycling agents

Fawaz Kaseer et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Rheological, fatigue and relaxation properties of aged bitumen

Ruxin Jing et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2020)

Add to Collection

Article Construction & Building Technology

Quantification of asphalt binder ageing from apparent molecular weight distributions using a new approximated analytical approach of the phase angle

Khedidja Krolkral et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2020)

Add to Collection

Review Construction & Building Technology

Correlation of asphalt performance indicators and aging Degrees: A review

Feng Wang et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Improved models for the prediction of asphalt binder dynamic shear modulus and phase angle

Ibrahim Onifade et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

Comparison of performance-based specification properties for asphalt binders sourced from around the world

Kristjan Lill et al.

CONSTRUCTION AND BUILDING MATERIALS (2020)

Add to Collection

Article Construction & Building Technology

The crossover temperature: significance and application towards engineering balanced recycled binder blends

Lorena Garcia Cucalon et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2019)

Add to Collection

Article Energy & Fuels

Oxidative and Thermoreversible Aging Effects on Performance-Based Rheological Properties of Six Latin American Asphalt Binders

Max Berkowitz et al.

ENERGY & FUELS (2019)

Add to Collection

Article Construction & Building Technology

Pavement performance compared with asphalt properties for five contracts in Ontario

Seyed Tabib et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Damage characteristics of waste engine oil bottom rejuvenated asphalt binder in the non-linear range and its microstructure

Yanjun Qiu et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Durability assessment of asphalt binder

Ezequiel Angius et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Double-edge-notched tension testing of asphalt mastics

Sophie Campbell et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Performance grading of extracted and recovered asphalt cements

Haibo Ding et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Construction & Building Technology

Dynamic modulus and phase angle prediction of laboratory aged asphalt mixtures

Mona Nobakht et al.

CONSTRUCTION AND BUILDING MATERIALS (2018)

Add to Collection

Article Engineering, Civil

Rheological Behavior and Its Chemical Interpretation of Crumb Rubber Modified Asphalt Containing Warm-Mix Additives

Haopeng Wang et al.

TRANSPORTATION RESEARCH RECORD (2018)

Add to Collection

Article Construction & Building Technology

Effect of cooling medium on low-temperature properties of asphalt binder

Chiara Riccardi et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2017)

Add to Collection

Article Construction & Building Technology

Non-isothermal kinetic analysis of reversible ageing in asphalt cements

Amanda Rigg et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2017)

Add to Collection

Article Engineering, Civil

Performance-Related Specifications for Asphalt Emulsions Used in Microsurfacing Treatments

Mohammad Ilias et al.

TRANSPORTATION RESEARCH RECORD (2017)

Add to Collection

Article Construction & Building Technology

Preliminary experience with improved asphalt cement specifications in the City of Kingston, Ontario, Canada

Haibo Ding et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Advanced mechanical characterization of asphalt mastics containing tourmaline modifier

Haibo Ding et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Fatigue behavior of epoxy asphalt concrete and its moisture susceptibility from flexural stiffness and phase angle

Sang Luo et al.

CONSTRUCTION AND BUILDING MATERIALS (2017)

Add to Collection

Article Construction & Building Technology

Influence of RAP sources and proportions on fracture and low temperature cracking performance of polymer modified binder

Dharamveer Singh et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Construction & Building Technology

Effect of recycled engine oil bottoms on the ductile failure properties of straight and polymer-modified asphalt cements

Migle Paliukaite et al.

CONSTRUCTION AND BUILDING MATERIALS (2016)

Add to Collection

Article Construction & Building Technology

Extension of Modified Havriliak-Negami Model to Characterize Linear Viscoelastic Properties of Asphalt Binders

Yanqing Zhao et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2016)

Add to Collection

Article Transportation

What is Transition Temperature for Bitumen and How to Measure It?

M. R. Nivitha et al.

TRANSPORTATION IN DEVELOPING ECONOMIES (2016)

Add to Collection

Article Construction & Building Technology

Characterization of asphalt concrete linear viscoelastic behavior utilizing Havriliak-Negami complex modulus model

Yiren Sun et al.

CONSTRUCTION AND BUILDING MATERIALS (2015)

Add to Collection

Article Construction & Building Technology

Evaluation of the Rheological Properties and Activation Energy of Virgin and Recovered Asphalt Binder Blends

Ali Jamshidi et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2015)

Add to Collection

Article Construction & Building Technology

Exploring low-temperature performance in Black Space

David J. Mensching et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2015)

Add to Collection

Article Construction & Building Technology

Molecular weight distribution of asphaltic paving binders from phase-angle measurements

Andrea Themeli et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2015)

Add to Collection

Article Materials Science, Characterization & Testing

The Influence of Binder Rheology on the Cracking of Asphalt Mixes in Airport and Highway Projects

G. M. Rowe et al.

JOURNAL OF TESTING AND EVALUATION (2014)

Add to Collection

Article Construction & Building Technology

A consistent approach for characterising asphalt concrete based on generalised Maxwell or Kelvin model

Yanqing Zhao et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2014)

Add to Collection

Article Construction & Building Technology

Modelling the rheological properties of bituminous binders using mathematical equations

Nur Izzi Md Yusoff et al.

CONSTRUCTION AND BUILDING MATERIALS (2013)

Add to Collection

Article Construction & Building Technology

Characterization of Linear Viscoelastic Behavior of Asphalt Concrete Using Complex Modulus Model

Yanqing Zhao et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)

Add to Collection

Article Construction & Building Technology

How to Construct an Asphalt Binder Master Curve and Assess the Degree of Blending between RAP and Virgin Binders

Abbas Booshehrian et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2013)

Add to Collection

Article Construction & Building Technology

Influence of reclaimed asphalt pavement content on complex modulus of asphalt binder blends and corresponding mixes: experimental results and modelling

S. Mangiafico et al.

ROAD MATERIALS AND PAVEMENT DESIGN (2013)

Add to Collection

Article Engineering, Civil

Evolution of the Crossover Modulus with Oxidative Aging Method to Estimate Change in Viscoelastic Properties of Asphalt Binder with Time and Depth on the Road

Michael J. Farrar et al.

TRANSPORTATION RESEARCH RECORD (2013)

Add to Collection

Article Construction & Building Technology

Characterizing Permanent Deformation and Fracture of Asphalt Mixtures by Using Compressive Dynamic Modulus Tests

Yuqing Zhang et al.

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2012)

Add to Collection

Article Engineering, Civil

Life-Cycle Greenhouse Gas Emissions of Materials Used in Road Construction

Christopher S. Hanson et al.

TRANSPORTATION RESEARCH RECORD (2012)

Add to Collection

Review Construction & Building Technology

Modelling the linear viscoelastic rheological properties of bituminous binders

Nur Izzi Md. Yusoff et al.

CONSTRUCTION AND BUILDING MATERIALS (2011)

Add to Collection

Article Polymer Science

Rheological Characterization of the Gel Point in Polymer-Modified Asphalts

M. A. Vargas et al.

JOURNAL OF APPLIED POLYMER SCIENCE (2011)

Add to Collection

Article Engineering, Civil

Effects of Physical Hardening on Stress Relaxation in Asphalt Cements Implications for Pavement Performance

Michael Evans et al.

TRANSPORTATION RESEARCH RECORD (2011)

Add to Collection

Article Engineering, Multidisciplinary

Experimental investigation on sol-gel transition of asphalt

A. Padmarekha et al.

INTERNATIONAL JOURNAL OF ADVANCES IN ENGINEERING SCIENCES AND APPLIED MATHEMATICS (2011)

Add to Collection

Article Construction & Building Technology

Evaluation of asphalt mixtures' viscoelastic properties using phase angle relationships

Krishna Prapoorna Biligiri et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2010)

Add to Collection

Article Engineering, Civil

Triaxial Frequency Sweep Characterization of Asphalt-Aggregate Adhesion in Saskatchewan Asphaltic Mixes

Curtis Berthelot et al.

JOURNAL OF TRANSPORTATION ENGINEERING (2010)

Add to Collection

Article Engineering, Civil

New Technique for Measuring Low-Temperature Properties of Asphalt Binders with Small Amounts of Material

Changping Sui et al.

TRANSPORTATION RESEARCH RECORD (2010)

Add to Collection

Article Engineering, Mechanical

Investigation of the dynamic and fatigue properties of fiber-modified asphalt mixtures

Qunshan Ye et al.

INTERNATIONAL JOURNAL OF FATIGUE (2009)

Add to Collection

Article Construction & Building Technology

Asphalt pavement cracking: analysis of extraordinary life cycle variability in eastern and northeastern Ontario

Simon A. M. Hesp et al.

INTERNATIONAL JOURNAL OF PAVEMENT ENGINEERING (2009)

Add to Collection

Article Engineering, Civil

Asphalt Cement Loss Tangent as Surrogate Performance Indicator for Control of Thermal Cracking

Abdolrasoul Soleimani et al.

TRANSPORTATION RESEARCH RECORD (2009)

Add to Collection

Article Construction & Building Technology

Rubber concentrations on rheology of aged asphalt binders

Shin-Che Huang

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2008)

Add to Collection

Article Energy & Fuels

Reversible aging in asphalt binders

Simon A. M. Hesp et al.

ENERGY & FUELS (2007)

Add to Collection

Article Construction & Building Technology

Direct measurement of asphalt binder thermal cracking

SS Kim

JOURNAL OF MATERIALS IN CIVIL ENGINEERING (2005)

Add to Collection

Article Energy & Fuels

Steric hardening and the ordering of asphaltenes in bitumen

JF Masson et al.

ENERGY & FUELS (2005)

Add to Collection

Article Energy & Fuels

Macrostructure and rheological properties of chemically modified residues and bitumens

C Giavarini et al.

ENERGY & FUELS (2000)

Add to Collection

© Peeref 2019-2024. All rights reserved.