Related references
Note: Only part of the references are listed.Micromachining of Pyrex 7740 Glass by Silicon Molding and Vacuum Anodic Bonding
Junwen Liu et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2011)
A low-temperature parylene-to-silicon dioxide bonding technique for high-pressure microfluidics
A. T. Ciftlik et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2011)
A microfabricated silicon platform with 60 microfluidic chips for rapid mass spectrometric analysis
Lauri Sainiemi et al.
LAB ON A CHIP (2011)
Beyond PDMS: off-stoichiometry thiol-ene (OSTE) based soft lithography for rapid prototyping of microfluidic devices
Carl Fredrik Carlborg et al.
LAB ON A CHIP (2011)
Integrated liquid chromatography-heated nebulizer microchip for mass spectrometry
Markus Haapala et al.
ANALYTICA CHIMICA ACTA (2010)
Fabrication of microfluidic devices using polydimethylsiloxane
James Friend et al.
BIOMICROFLUIDICS (2010)
A perspective on microfluidic biofuel cells
Jin Wook Lee et al.
BIOMICROFLUIDICS (2010)
A dielectrophoretic chip with a roughened metal surface for on-chip surface-enhanced Raman scattering analysis of bacteria
I-Fang Cheng et al.
BIOMICROFLUIDICS (2010)
A miniaturized continuous dielectrophoretic cell sorter and its applications
Ana Valero et al.
BIOMICROFLUIDICS (2010)
Review Article-Dielectrophoresis: Status of the theory, technology, and applications
Ronald Pethig
BIOMICROFLUIDICS (2010)
Synthesis of micro and nanostructures in microfluidic systems
Samuel Marre et al.
CHEMICAL SOCIETY REVIEWS (2010)
Microfluidic lab-on-a-chip platforms: requirements, characteristics and applications
Daniel Mark et al.
CHEMICAL SOCIETY REVIEWS (2010)
Thin Film Ag Masking for Deep Glass Micromachining
Hing Wah Lee et al.
ELECTROCHEMICAL AND SOLID STATE LETTERS (2010)
Microfabricated planar glass gas chromatography with photoionization detection
Alastair C. Lewis et al.
JOURNAL OF CHROMATOGRAPHY A (2010)
Frequency dependence on the accuracy of electrical impedance spectroscopy measurements in microfluidic devices
Ciprian Iliescu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2010)
Single-cell microfluidic impedance cytometry: a review
Tao Sun et al.
MICROFLUIDICS AND NANOFLUIDICS (2010)
Magnetic connectors for microfluidic applications
Javier Atencia et al.
LAB ON A CHIP (2010)
Wet-etching of structures with straight facets and adjustable taper into glass substrates
Nikola Pekas et al.
LAB ON A CHIP (2010)
Dielectrophoretic field-flow method for separating particle populations in a chip with asymmetric electrodes
Ciprian Iliescu et al.
BIOMICROFLUIDICS (2009)
Cell Culture on MEMS Platforms: A Review
Ming Ni et al.
INTERNATIONAL JOURNAL OF MOLECULAR SCIENCES (2009)
Characterization of High-Pressure XeF2 Vapor-Phase Silicon Etching for MEMS Processing
Clayton Easter et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2009)
Study on bisbenzocyclobutene bonding for the development of a Si-based miniaturized reformer of fuel cell systems
Dae-Hyun Choi et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Deep etching of glass wafers using sputtered molybdenum masks
Frederik Ceyssens et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Microfluidic heated gas jet shape analysis by temperature scanning
Ville Saarela et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Black silicon method X: a review on high speed and selective plasma etching of silicon with profile control: an in-depth comparison between Bosch and cryostat DRIE processes as a roadmap to next generation equipment
H. V. Jansen et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2009)
Wafer-level BCB bonding using a thermal press for microfluidics
Xiaodong Zhou et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2009)
Localised laser joining of glass to silicon with BCB intermediate layer
Qiang Wu et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2009)
High-pressure needle interface for thermoplastic microfluidics
C. F. Chen et al.
LAB ON A CHIP (2009)
Anodic bonding of glasses with interlayers for fully transparent device applications
Piotr Mrozek
SENSORS AND ACTUATORS A-PHYSICAL (2009)
Nanofluidic devices and their applications
Patirick Abgrall et al.
ANALYTICAL CHEMISTRY (2008)
Calcium-assisted glass-to-glass bonding for fabrication of glass microfluidic devices
Peter B. Allen et al.
ANALYTICAL CHEMISTRY (2008)
Titanium-based dielectrophoresis devices for microfluidic applications
Y. T. Zhang et al.
BIOMEDICAL MICRODEVICES (2008)
Glass-based nanofluidic device for biomolecule preconcentration study
P. Svarnas et al.
EUROPEAN PHYSICAL JOURNAL-APPLIED PHYSICS (2008)
Fabrication and characterization of a wafer-level MEMS vacuum package with vertical feedthroughs
Junseok Chae et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2008)
Wafer level packaging of MEMS
Masayoshi Esashi
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Deep plasma etching of glass for fluidic devices with different mask materials
Kai Kolari et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Room temperature UV adhesive bonding of CE devices
Susan Carroll et al.
LAB ON A CHIP (2008)
Three-dimensional microfluidic devices fabricated in layered paper and tape
Andres W. Martinez et al.
PROCEEDINGS OF THE NATIONAL ACADEMY OF SCIENCES OF THE UNITED STATES OF AMERICA (2008)
On the wet etching of Pyrex glass
Ciprian Iliescu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2008)
Artificial molecular sieves and filters: a new paradigm for biomolecule separation
Jianping Fu et al.
TRENDS IN BIOTECHNOLOGY (2008)
Thick and low-stress PECVD amorphous silicon for MEMS applications
Ciprian Iliescu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2008)
Polymer microfabrication technologies for microfluidic systems
Holger Becker et al.
ANALYTICAL AND BIOANALYTICAL CHEMISTRY (2008)
Three-dimensional integration of microoptical components buried inside photosensitive glass by femtosecond laser direct writing
Zhongke Wang et al.
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING (2007)
Catching bird flu in a droplet
Juergen Pipper et al.
NATURE MEDICINE (2007)
A versatile surface channel concept for microfluidic applications
M. Dijkstra et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Cell differentiation guidance using chemical stimulation controlled by a microfluidic device
Yuta Nakashima et al.
SENSORS AND ACTUATORS A-PHYSICAL (2007)
Glass-based microfluidic device fabricated by parylene wafer-to-wafer bonding for impedance spectroscopy
Daniel P. Poenar et al.
SENSORS AND ACTUATORS A-PHYSICAL (2007)
Thermal isolation of microchip reaction chambers for rapid non-contact DNA amplification
Christopher J. Easley et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Performance of SU-8 microchips as separation devices and comparison with glass microchips
Tiina Sikanen et al.
ANALYTICAL CHEMISTRY (2007)
Continuous field-flow separation of particle populations in a dielectrophoretic chip with three dimensional electrodes
Ciprian Iliescu et al.
APPLIED PHYSICS LETTERS (2007)
Lab-on-chip technologies:: making a microfluidic network and coupling it into a complete microsystem -: a review
P. Abgrall et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
A microfluidic device for impedance spectroscopy analysis of biological samples
Ciprian Iliescu et al.
SENSORS AND ACTUATORS B-CHEMICAL (2007)
Application of PECVD SiC in glass micromachining
Haixia Zhang et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Strategies in deep wet etching of Pyrex glass
Ciprian Iliescu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2007)
Electrical and thermal characterization of a dielectrophoretic chip with 3D electrodes for cells manipulation
Francis E. H. Tay et al.
ELECTROCHIMICA ACTA (2007)
Re-usable quick-release interconnect for characterization of microfluidic systems
Ali Asgar S. Bhagat et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2007)
Glass microfabricated nebulizer chip for mass spectrometry
Ville Saarela et al.
LAB ON A CHIP (2007)
Fabrication of flexible neural probes with built-in microfluidic channels by thermal bonding of Parylene
Dominik Ziegler et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)
A dielectrophoretic chip with a 3-D electric field gradient
Ciprian Iliescu et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)
Microstructuring of glassy carbon mold for glass embossing - Comparison of focused ion beam, nano/femtosecond-pulsed laser and mechanical machining
S. W. Youn et al.
MICROELECTRONIC ENGINEERING (2006)
Dry etching of deep cavities in Pyrex for MEMS applications using standard lithography
Adi Baram et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)
A novel concept of the integrated fluorescence detection system and its application in a lab-on-a-chip microdevice
Radoslaw Mazurczyk et al.
SENSORS AND ACTUATORS B-CHEMICAL (2006)
A systematic approach to process selection in MEMS
David J. Quinn et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)
Monolithic surface micromachined fluidic devices for dielectrophoretic preconcentration and routing of particles
Conrad D. James et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)
A microfabricated nebulizer for liquid vaporization in chemical analysis
Sami Franssila et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)
Defect-free wet etching through pyrex glass using Cr/Au mask
Francis E. H. Tay et al.
MICROSYSTEM TECHNOLOGIES-MICRO-AND NANOSYSTEMS-INFORMATION STORAGE AND PROCESSING SYSTEMS (2006)
Voltage pulse frequency and duty ratioeffects in an electrochemical discharge microdrilling process of Pyrex glass
Dae-Jin Kim et al.
INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE (2006)
A review of microvalves
Kwang W. Oh et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)
Deep reactive ion etching of borosilicate glass using an anodically bonded silicon wafer as an etching mask
T. Akashi et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2006)
Re-usable multi-inlet PDMS fluidic connector
V Saarela et al.
SENSORS AND ACTUATORS B-CHEMICAL (2006)
Room temperature wafer level glass/glass bonding
MMR Howlader et al.
SENSORS AND ACTUATORS A-PHYSICAL (2006)
A reworkable adhesive-free interconnection technology for microfluidic systems
T Pan et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2006)
Nanofluidic channels by anodic bonding of amorphous silicon to glass to study ion-accumulation and ion-depletion effect
A Datta et al.
TALANTA (2006)
Characterization of low-temperature wafer bonding using thin-film Parylene
H Kim et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2005)
Deep fused silica wet etching using an Au-free and stress-reduced sputter-deposited Cr hard mask
I Steingoetter et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)
Deep dry etching of borosilicate glass using SF6 and SF6/Ar inductively coupled plasmas
JH Park et al.
MICROELECTRONIC ENGINEERING (2005)
Characterization of masking layers for deep wet etching of glass in an improved HF/HCl solution
C Iliescu et al.
SURFACE & COATINGS TECHNOLOGY (2005)
Fabrication of microchip electrophoresis devices and effects of channel surface properties on separation efficiency
MS Kim et al.
SENSORS AND ACTUATORS B-CHEMICAL (2005)
Free-standing SU-8 microfluidic chips by adhesive bonding and release etching
S Tuomikoski et al.
SENSORS AND ACTUATORS A-PHYSICAL (2005)
Fabrication of a high-temperature microreactor with integrated heater and sensor patterns on an ultrathin silicon membrane
RM Tiggelaar et al.
SENSORS AND ACTUATORS A-PHYSICAL (2005)
Fabrication of a dielectrophoretic chip with 3D silicon electrodes
C Iliescu et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2005)
Stress control in masking layers for deep wet micromachining of Pyrex glass
C Iliescu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2005)
Simulation and experimental validation of a SU-8 based PCR thermocycler chip with integrated heaters and temperature sensor
J El-Ali et al.
SENSORS AND ACTUATORS A-PHYSICAL (2004)
A new masking technology for deep glass etching and its microfluidic application
MQ Bu et al.
SENSORS AND ACTUATORS A-PHYSICAL (2004)
Bonding of glass microfluidic chips at room temperatures
ZJ Jia et al.
ANALYTICAL CHEMISTRY (2004)
In-plane single-crystal-silicon microneedles for minimally invasive microfluid systems
SJ Paik et al.
SENSORS AND ACTUATORS A-PHYSICAL (2004)
Micro check valves for integration into polymeric microfluidic devices
NT Nguyen et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
A review of micropumps
DJ Laser et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2004)
Flexible polyimide probes with microelectrodes and embedded microfluidic channels for simultaneous drug delivery and multi-channel monitoring of bioelectric activity
S Metz et al.
BIOSENSORS & BIOELECTRONICS (2004)
Polyimide and SU-8 microfluidic devices manufactured by heat-depolymerizable sacrificial material technique
S Metz et al.
LAB ON A CHIP (2004)
Characterization of masking materials for deep glass micromachining
DCS Bien et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2003)
Wet anisotropic etching for fluidic 1D nanochannels
J Haneveld et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2003)
Powder blasting patterning technology for microfabrication of complex suspended structures in glass
AG Pawlowski et al.
MICROELECTRONIC ENGINEERING (2003)
Etch rates for micromachining processing - Part II
KR Williams et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2003)
Fabrication of high-density electrical feed-throughs by deep-reactive-ion etching of Pyrex glass
XG Li et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2002)
Microfluidic large-scale integration
T Thorsen et al.
SCIENCE (2002)
Low-temperature full wafer adhesive bonding
F Niklaus et al.
JOURNAL OF MICROMECHANICS AND MICROENGINEERING (2001)
Monolithic microfabricated valves and pumps by multilayer soft lithography
MA Unger et al.
SCIENCE (2000)
Micromachining of buried micro channels in silicon
MJ de Boer et al.
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS (2000)
Study of low-temperature direct bonding of (111) and (100) silicon wafers under various ambient and surface conditions
D Resnik et al.
SENSORS AND ACTUATORS A-PHYSICAL (2000)