☆ 4.6 Article

A combined experimental and theoretical study of composite SnO2-BiVO4 for selective NO2 sensing

MATERIALS CHEMISTRY AND PHYSICS (2022)

Related references

Note: Only part of the references are listed.

Article Nanoscience & Nanotechnology

In-Depth Study of Heavy Metal Removal by an Etidronic Acid-Functionalized Layered Double Hydroxide

Sidi Zhu et al.

Summary: Sorption methodologies are important in the removal of heavy metals for access to drinkable water. This study fabricated a new adsorbent material and investigated its adsorption properties and mechanisms. The interactions between the material and pollutants were studied through experiments and simulations, providing insights into the adsorption mechanism.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Chemistry, Analytical

In situ growth of ternary metal sulfide based quantum dots to detect dual gas at extremely low levels with theoretical investigations

Utkarsh Kumar et al.

Summary: This paper explores the advantage of ternary metal sulfides in detecting various gases at extremely low concentrations. An ultrafine TiO2/PbSnS thin film was fabricated using the SILAR method and demonstrated effective sensing of CO and NO2. Advanced material characterization techniques revealed high-quality PbSnS nanoparticles and the sensor exhibited excellent sensing performance for both gases at room temperature.

SENSORS AND ACTUATORS B-CHEMICAL (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Highly Selective Ethyl Mercaptan Sensing Using a MoSe2/SnO2 Composite at Room Temperature

Sukhwinder Singh et al.

Summary: By using a heterostructure-based design with a MoSe2/SnO2 composite, sensitive and selective detection of ethyl mercaptan at room temperature has been achieved. The composite shows detection capability for ethyl mercaptan over a wider range of relative humidity and exhibits adsorption selectivity towards ethyl mercaptan compared to other analytes. The device also maintains stable response even at extreme humidity levels.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Environmental

New insights into the capture performance and mechanism of hazardous metals Cr3+ and Cd2+ onto an effective layered double hydroxide based material

Sidi Zhu et al.

Summary: The phosphonate functionalized layered double hydroxide proved to be an excellent adsorbent for capturing toxicant metal ions, with a maximum adsorption capacity dominated by chemisorption and monolayer interaction. In addition, the spent adsorbent showed satisfactory reusability after multiple cycles, and Forcite simulation suggested electrostatic interaction as a critical mechanism for modifiers and the surface sites of the interlayer.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Selective N,N-Dimethylformamide Vapor Sensing Using MoSe2/Multiwalled Carbon Nanotube Composites at Room Temperature

Sukhwinder Singh et al.

Summary: This study demonstrates a chemiresistor sensor based on a composite of MoSe2 and multiwalled carbon nanotubes for the detection of DMF in the environment. Compared to a standalone MoSe2 sensor, the composite-based sensor shows improved sensitivity, selectivity, and response and recovery times, as well as consistent response over a wider range of relative humidities.

ACS APPLIED NANO MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Nanoarchitectonics with lead sulfide quantum dots for room-temperature real-time ozone trace detection with different light exposure

Utkarsh Kumar et al.

Summary: This study reports the synthesis of colloidal quantum dots of lead sulfide (PbS) via the hot injection method and their application as a room temperature real-time O3 sensor. The PbS quantum dots were found to easily absorb and desorb ozone molecules at room temperature, and the response and recovery time were not affected by visible light irradiation. The sensing response was highest under fluorescent lamp irradiation, with a detection limit of 1.34 ppb.

JOURNAL OF ALLOYS AND COMPOUNDS (2022)

Add to Collection

Article Nanoscience & Nanotechnology

Revealing a Highly Sensitive Sub-ppb-Level NO2 Gas-Sensing Capability of Novel Architecture 2D/0D MoS2/SnS Heterostructures with DFT Interpretation

Utkarsh Kumar et al.

Summary: This work presents the design of novel 2D-material/0D-quantum dot heterostructures using a chemical method, and demonstrates their enhanced NO2 gas-sensing capability. Advanced characterization techniques were used to confirm the formation of MoS2/SnS heterojunction nanomaterials. The sensing characterization showed excellent response time and low limit of detection for NO2 using the MoSiSnS heterostructures.

ACS APPLIED MATERIALS & INTERFACES (2022)

Add to Collection

Article Engineering, Environmental

MoSe2/multiwalled carbon nanotube composite for ammonia sensing in natural humid environment

Sukhwinder Singh et al.

Summary: In this study, a MoSe2/MWCNT composite was used as a sensing platform for ammonia detection in a highly humid environment. The composite exhibited superior sensing properties at low temperatures and high humidity, and showed good adsorption selectivity. Density functional theory simulations provided insights into the adsorption process and selectivity behavior of the composite.

JOURNAL OF HAZARDOUS MATERIALS (2022)

Add to Collection

Article Chemistry, Physical

Selective, sensitive, and stable NO2 gas sensor based on porous ZnO nanosheets

Myung Sik Choi et al.

Summary: Porous ZnO nanosheets were synthesized using a solvothermal method for high sensitivity detection of NO2 gas, showing high selectivity and stability. Enhanced response was attributed to the synergetic effects of high surface area, ZnO/ZnO homojunctions, and structural defects.

APPLIED SURFACE SCIENCE (2021)

Add to Collection

Article Environmental Sciences

Fluorine-implanted indium-gallium-zinc oxide (IGZO) chemiresistor sensor for high-response NO2 detection

Sunil Babu Eadi et al.

Summary: Gas sensors fabricated using F-doped IGZO thin films exhibited high sensitivity and selectivity to NO2 gas, with stable performance observed over a 2-week period.

CHEMOSPHERE (2021)

Add to Collection

Article Chemistry, Analytical

Effect of mixing ratio on NO2 gas sensor response with SnO2-decorated carbon nanotube channels fabricated by one-step dielectrophoretic assembly

Masafumi Inaba et al.

Summary: The study fabricated CNT/SnO2 heterojunction gas sensors using one-step dielectrophoretic assembly and investigated the effect of CNT/SnO2 ratio on gas detection properties. The results showed that the UV-irradiated CNT/SnO2 heterojunction gas sensor had a high response to 1 ppm NO2 in artificial air.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Article Chemistry, Analytical

Improving anti-humidity property of In0O3 based NO2 sensor by fluorocarbon plasma treatment

Bingsheng Du et al.

Summary: By modifying In2O3 with a layer of CF to improve its anti-humidity properties in NO2 sensing, the CF modified In2O3 (CF-In2O3) sensors exhibit good sensitivity and selectivity to NO2, with a significantly enhanced anti-interference performance to humidity. This work makes significant advances in addressing moisture interference and detecting NO2 in practical applications.

SENSORS AND ACTUATORS B-CHEMICAL (2021)

Add to Collection

Article Chemistry, Multidisciplinary

MoS2/MoO3 Nanocomposite for Selective NH3 Detection in a Humid Environment

Sukhwinder Singh et al.

Summary: The research team developed a MoS2/MoO3 composite with enhanced surface properties using a two-step approach, which exhibited superior sensing characteristics as a gas sensor in detecting NH3 under extreme working conditions. The synergistic effect of heterostructure formation between the base materials contributed to the selective response of the composite towards NH3 gas in humid environments.

ACS SUSTAINABLE CHEMISTRY & ENGINEERING (2021)

Add to Collection

Article Materials Science, Multidisciplinary

Effect of heat treatment on WO3 nanostructures based NO2 gas sensor low-cost device

Ameer Khudadad et al.

Summary: This study investigated the heat treatment influence on the morphological, structural, and gas sensing performance of Tungsten trioxide, and observed optimal crystalline size and surface area at 750 degrees C. The surface morphology of Tungsten trioxide showed a grape-like structure with high surface roughness, making it active for gas molecules. Furthermore, WO3 nano-structures demonstrated high selectivity, stability, and reproducibility to NO2 toxic gas.

MATERIALS CHEMISTRY AND PHYSICS (2021)

Add to Collection

Article Chemistry, Multidisciplinary

Detection of nitrobenzene using transition metal doped C24: A DFT study

Debolina Paul et al.

Summary: First principles calculations were used to investigate the sensing capabilities of transition metal doped C-24 fullerenes for nitrobenzene. Among the transition metal doped fullerenes, Sc doped C-24 emerged as the best sensor device due to its reasonable adsorption energy and achievable recovery time.

STRUCTURAL CHEMISTRY (2021)

Add to Collection

Article Nanoscience & Nanotechnology

MoS2/WO3 Nanosheets for Detection of Ammonia

Sukhwinder Singh et al.

Summary: This article presents a highly sensitive and selective chemiresistive ammonia sensor based on a p-MoS2/n-WO3 heterojunction, showing enhanced performance compared to individual MoS2 and WO3 sensors. The device demonstrates excellent response-recovery features and selectivity towards ammonia, with the capability to detect ammonia down to 1 ppm. The experimental results are further supported by density functional theory (DFT) simulation to understand the sensing mechanism and charge transfer dynamics.

ACS APPLIED NANO MATERIALS (2021)

Add to Collection

Article Engineering, Electrical & Electronic

TiO2/ZnO heterostructure nanowire based NO2 sensor

Niranjan Ramgir et al.

MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING (2020)

Add to Collection

Article Optics

An Ag-assisted silicon slot waveguide sensor model for mid-infrared spectra gas detection with micro-ring air pressure compensation

Xin Zhang et al.

OPTIK (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MoS2 Nanosheets Sensitized with Quantum Dots for Room-Temperature Gas Sensors

Jingyao Liu et al.

NANO-MICRO LETTERS (2020)

Add to Collection

Article Chemistry, Multidisciplinary

High Stability of Rh Oxide-Based Thermoresistive Catalytic Combustion Sensors Proven by Operando X-ray Absorption Spectroscopy and X-ray Diffraction

Sabrina Mueller et al.

ACS SENSORS (2020)

Add to Collection

Article Engineering, Chemical

Synthesis of MWCNT/PPY nanocomposite using oxidation polymerization method and its employment in sensing such as CO2 and humidity

Utkarsh Kumar et al.

JOURNAL OF THE TAIWAN INSTITUTE OF CHEMICAL ENGINEERS (2020)

Add to Collection

Article Nanoscience & Nanotechnology

MoSe2 Crystalline Nanosheets for Room-Temperature Ammonia Sensing

Sukhwinder Singh et al.

ACS APPLIED NANO MATERIALS (2020)

Add to Collection

Review Engineering, Electrical & Electronic

Room temperature conductive type metal oxide semiconductor gas sensors for NO2 detection

Chao Zhang et al.

SENSORS AND ACTUATORS A-PHYSICAL (2019)

Add to Collection

Article Chemistry, Analytical

Development of humidity sensor using modified curved MWCNT based thin film with DFT calculations

Utkarsh Kumar et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Add to Collection

Article Chemistry, Analytical

High sensitive reduced graphene oxide-based room temperature ionic liquid electrochemical gas sensor with carbon-gold nanocomposites amplification

Hao Wan et al.

SENSORS AND ACTUATORS B-CHEMICAL (2019)

Add to Collection

Article Chemistry, Physical

Directed synthesis of SnO2@BiVO4/Co-Pi photoanode for highly efficient photoelectrochemical water splitting and urea oxidation

Jingchao Liu et al.

JOURNAL OF MATERIALS CHEMISTRY A (2019)

Add to Collection

Article Nanoscience & Nanotechnology

Design of Hetero-Nanostructures on MoS2 Nanosheets To Boost NO2 Room-Temperature Sensing

Yutong Han et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Nanoscience & Nanotechnology

Recovery Improvement for Large-Area Tungsten Diselenide Gas Sensors

Kyung Yong Ko et al.

ACS APPLIED MATERIALS & INTERFACES (2018)

Add to Collection

Article Chemistry, Analytical

Novel alpha-Fe2O3/BiVO4 heterojunctions for enhancing NO2 sensing properties

Shouli Bai et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Add to Collection

Article Chemistry, Analytical

Visible light assisted NO2 sensing at room temperature by CdS nanoflake array

Hua-Yao Li et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Add to Collection

Article Chemistry, Analytical

Rational synthesis of molybdenum disulfide nanoparticles decorated reduced graphene oxide hybrids and their application for high-performance NO2 sensing

Ziying Wang et al.

SENSORS AND ACTUATORS B-CHEMICAL (2018)

Add to Collection

Article Chemistry, Multidisciplinary

UV-Activated MoS2 Based Fast and Reversible NO2 Sensor at Room Temperature

Rahul Kumar et al.

ACS SENSORS (2017)

Add to Collection

Article Nanoscience & Nanotechnology

BiVO4/WO3/SnO2 Double-Heterojunction Photoanode with Enhanced Charge Separation and Visible-Transparency for Bias-Free Solar Water-Splitting with a Perovskite Solar Cell

Ji Hyun Baek et al.

ACS APPLIED MATERIALS & INTERFACES (2017)

Add to Collection

Article Chemistry, Multidisciplinary

First principle study of adsorption of boron-halogenated system on pristine graphyne

Jyotirmoy Deb et al.

STRUCTURAL CHEMISTRY (2016)

Add to Collection

Proceedings Paper Materials Science, Multidisciplinary

Low temperature study of nanostructured Fe2O3 thin films as NO2 sensor

Rakesh K. Sonker et al.

MATERIALS TODAY-PROCEEDINGS (2016)

Add to Collection

Article Chemistry, Analytical

Room temperature detection of NO2 gas using optical sensor based on surface plasmon resonance technique

Ayushi Paliwal et al.

SENSORS AND ACTUATORS B-CHEMICAL (2015)

Add to Collection

Article Chemistry, Multidisciplinary

Stabilizing MoS2 Nanosheets through SnO2 Nanocrystal Decoration for High-Performance Gas Sensing in Air

Shumao Cui et al.

SMALL (2015)

Add to Collection

Article Chemistry, Multidisciplinary

In situ construction of an SnO2/g-C3N4 heterojunction for enhanced visible-light photocatalytic activity

Xi Chen et al.

RSC ADVANCES (2015)

Add to Collection

Article Chemistry, Multidisciplinary

High-Performance Chemical Sensing Using Schottky-Contacted Chemical Vapor Deposition Grown Mono layer MoS2 Transistors

Bilu Liu et al.

ACS NANO (2014)

Add to Collection

Article Chemistry, Physical

Double-Deck Inverse Opal Photoanodes: Efficient Light Absorption and Charge Separation in Heterojunction

Ming Ma et al.

CHEMISTRY OF MATERIALS (2014)

Add to Collection

Article Nanoscience & Nanotechnology

Selective response inversion to NO2 and acetic acid in ZnO and CdS nanocomposite gas sensor

D. Calestani et al.

NANOTECHNOLOGY (2014)

Add to Collection

Article Chemistry, Multidisciplinary

Highly selective and sensitive CdS thin film sensors for detection of NO2 gas

S. T. Navale et al.

RSC ADVANCES (2014)

Add to Collection

Article Chemistry, Multidisciplinary

BiVO4 nano-leaves: Mild synthesis and improved photocatalytic activity for O-2 production under visible light irradiation

Zhiqiang Wang et al.

CRYSTENGCOMM (2011)

Add to Collection

Article Chemistry, Physical

A Parallel Solid-State NMR and Sensor Property Study on Flower-like Nanostructured SnO2

Qiong Wang et al.

JOURNAL OF PHYSICAL CHEMISTRY C (2010)

Add to Collection

Article Chemistry, Multidisciplinary

cclib: A library for package-independent computational chemistry algorithms

Noel M. O'Boyle et al.

JOURNAL OF COMPUTATIONAL CHEMISTRY (2008)

Add to Collection

© Peeref 2019-2024. All rights reserved.