Time and temperature dependence of the scratch properties of poly(methylmethacrylate) surfaces

Most existing models describing the scratch properties of materials take into account forces acting at the interface between the material and a grooving tip, but do not consider the stress and strain properties of the material far beneath or ahead of the tip. In the case of polymer scratches, there are no models at all which take into account the viscoelastic viscoplastic behaviour of the material. In standard indentation tests with a non moving tip, the elastic plastic boundary and the limits of the region subjected to hydrostatic pressure beneath the tip are known. These models were used to analyse the geometry of the grooves left on the surface of a viscoelastic viscoplastic body by a moving cone-shaped diamond tip having a radius of about 40 mu m. A new apparatus was built to control the velocity of the tip over the range 1 to 10(4) mu m/s, at several different temperatures from -10 degrees C to 100 degrees C. The material was a commercial grade of cast poly(methylmethacrylate) (PMMA). The normal and tangential loads and groove size were used to evaluate the dynamic hardness, which behaved like a stress and temperature activated process. Values of the activation energy and volume of the dynamic hardness and of the interfacial shear stress were in good agreement with those usually attributed to the mechanical properties of PMMA. (C) 2000 Kluwer Academic Publishers.