4.3 Article

Effect of microstructure evolution on fracture toughness in isothermally aged austenitic stainless steels for cryogenic applications

Journal

CRYOGENICS
Volume 40, Issue 11, Pages 693-700

Publisher

ELSEVIER SCI LTD
DOI: 10.1016/S0011-2275(01)00004-2

Keywords

austenitic stainless steels; fracture toughness; cryogenic; microstructure

Ask authors/readers for more resources

Two types of austenitic stainless steels JJ1 and JN1 were isothermally aged at temperatures from 600 degreesC to 900 degreesC for 10-1000 min in order to study the microstructural evolution and its effect on fracture toughness at cryogenic temperatures. These steels were developed for applications in the superconducting magnets of a fusion experimental reactor by the Japan Atomic Energy Research Institute. The Charpy V-Notch (CVN) fracture energy at 77 K showed a significant decrease with aging time for both steels. The intergranular precipitation of carbides and nitrides is responsible for the fracture toughness deterioration. The scanning electron microscope (SEM) fractographs showed an intergranular brittle fracture and its fraction also increased with aging time and temperature. The presence of a more abundant intergranular precipitation resulted in a more rapid decrease in fracture toughness with aging time in JN 1 steel due to its higher content of C and N, compared to that of JJ 1 steel. The volume fraction of precipitates can be uniquely correlated with the reduction in toughness. (C) 2001 Elsevier Science Ltd. AH rights reserved.

Authors

I am an author on this paper
Click your name to claim this paper and add it to your profile.

Reviews

Primary Rating

4.3
Not enough ratings

Secondary Ratings

Novelty
-
Significance
-
Scientific rigor
-
Rate this paper

Recommended

No Data Available
No Data Available