Influence of foreign ions on the crystal structure of BaTiO3

The influence of dopants (Cr, Co, Fe, Ni, Y, Er, Tb, Gd, Pr and La) on the crystal structure of barium titanate was studied at room temperature and at 250 degrees C using X-ray diffraction. Fine BaTiO3 powders (Ba/Ti = 1.02, size approximate to 30 nm) have been doped with 1 at% of the foreign element and annealed for 14 and 62 h at two different temperatures: 950 and 1350 degrees C. The room temperature structure of doped BaTiO3 was in any case tetragonal with c/a ratio lower than in the undoped perovskite, but dependent on dopant nature and particle size. For powders calcined at 1350 degrees C, the particle size was in the range 1-5 mu m and the decrease in tetragonality was mainly determined by dopant incorporation. Powders treated at 950 degrees C had particles more than one order of magnitude finer (0.1-0.2 mu m) and a systematic lowering of the c/a ratio in comparison to the samples annealed at higher temperature was observed. Comparison of the experimental variations of the unit cell edge of cubic BaTiO3 (250 degrees C) with the results of atomistic computer simulations gives indication on the preferential incorporation site of the dopant. In particular, La3+ and Pr3+ prefer to substitute at the Ba site, whereas Tb3+ and Gd3+ give partial substitution at the Ti site. For Er3+ and Y3+ preferential substitution at the Ti site is predicted. For transition metal ions, substitution at the Ti site with oxygen vacancy compensation is confirmed, although their behaviour is less accurately reproduced. (C) 2000 Elsevier Science Ltd. All rights reserved.